Final Government Distribution Chapter 6 IPCC WGIII AR6 1 Table of Contents 2 Chapter 6: Energy Systems ............................................................................................................ 6-1 3 Executive Summary ......................................................................................................................... 6-3 4 6.1 Introduction .......................................................................................................................... 6-6 5 6.2 The Scope of the Energy System and its Possible Evolution ............................................... 6-8 6 6.3 Recent Energy System Trends and Developments .............................................................. 6-9 7 6.4 Mitigation Options ............................................................................................................. 6-22 8 6.4.1 Elements of Characterization ......................................................................................... 6-22 9 6.4.2 Energy Sources and Energy Conversion ........................................................................ 6-22 10 6.4.3 Energy System Integration ............................................................................................. 6-48 11 6.4.4 Energy Storage for Low-Carbon Grids .......................................................................... 6-52 12 6.4.5 Energy Transport and Transmission .............................................................................. 6-58 13 6.4.6 Demand Side Mitigation Options from an Energy Systems Perspective ....................... 6-63 14 6.4.7 Summary of Mitigation Options .................................................................................... 6-65 15 6.5 Climate Change Impacts on the Energy System ................................................................ 6-69 16 6.5.1 Climate Impacts on the Energy System ......................................................................... 6-69 17 6.5.2 Impacts on Energy Supply ............................................................................................. 6-71 18 6.5.3 Impacts on Energy Consumption ................................................................................... 6-75 19 6.5.4 Impacts on Electricity System Vulnerability ................................................................. 6-77 20 6.6 Key Characteristics of Net Zero Energy Systems .............................................................. 6-78 21 6.6.1 What is a Net Zero Energy System? .............................................................................. 6-78 22 6.6.2 Configurations of Net-zero Energy Systems.................................................................. 6-80 23 6.6.3 The Institutional and Societal Characteristics of Net-zero Energy Systems .................. 6-94 24 6.6.4 Regional Circumstances and Net-zero Energy Systems ................................................ 6-95 25 6.7 Low-Carbon Energy System Transitions in the Near- and Medium-Term ........................ 6-98 26 6.7.1 Low-Carbon Energy System Transition Pathways ........................................................ 6-98 27 6.7.2. Investments in Technology and Infrastructure ......................................................... 6-110 28 6.7.3 Energy System Lock-In and Path Dependence ............................................................ 6-112 29 6.7.4 Fossil fuels in a low-carbon transition ......................................................................... 6-117 30 6.7.5 Policy and Governance ................................................................................................ 6-118 31 6.7.6 Behaviour and Societal Integration .............................................................................. 6-120 32 6.7.7 The Costs and Benefits of Low-Carbon Energy System Transitions in the Context of 33 Sustainable Development ......................................................................................................... 6-123 34 Frequently Asked Questions ........................................................................................................ 6-127 35 References .................................................................................................................................... 6-129 36 Do Not Cite, Quote or Distribute 6-2 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 Executive Summary 2 Warming cannot be limited to well below 2°C without rapid and deep reductions in energy system 3 CO2 and GHG emissions. In scenarios limiting likely warming to 1.5°C with limited overshoot (likely 4 below 2°C), net energy system CO2 emissions (interquartile range) fall by 87% to 97%% (60% to 79%) 5 in 2050. In 2030, in scenarios limiting warming to 1.5°C with no or limited overshoot, net CO2 and 6 GHG emissions fall by 35-51% and 38-52% respectively. In scenarios limiting warming to 1.5°C with 7 no or limited overshoot (likely below 2°C), net electricity sector CO2 emissions reach zero globally 8 between 2045 and 2055 (2050 and 2080) (high confidence) {6.7} 9 Limiting warming to well below 2°C will require substantial energy system changes over the next 10 30 years. This includes reduced fossil fuel consumption, increased production from low- and zero- 11 carbon energy sources, and increased use of electricity and alternative energy carriers. Coal 12 consumption without CCS falls by 67% to 82% (interquartile range) in 2030 in scenarios limiting 13 warming to 1.5°C with no or limited overshoot. Oil and gas consumption fall more slowly. Low-carbon 14 sources produce 93% to 97% of global electricity by 2050 in scenarios that limit likely warming to 2°C 15 or below. In scenarios limiting warming to 1.5°C with no or limited overshoot (likely below 2°C), 16 electricity supplies 48% to 58% (36% to 47%) of final energy in 2050, up from 20% in 2019. (high 17 confidence) {6.7} 18 Net Zero energy systems will share common characteristics, but the approach in every country 19 will depend on national circumstances. Common characteristics of net zero energy systems will 20 include: (1) electricity systems that produce no net CO2 or remove CO2 from the atmosphere; (2) 21 widespread electrification of end uses, including light-duty transport, space heating, and cooking; (3) 22 substantially lower use of fossil fuels than today (4) use of alternative energy carriers such as hydrogen, 23 bioenergy, and ammonia to substitute for fossil fuels in sectors less amenable to electrification; (5) more 24 efficient use of energy than today; (6) greater energy system integration across regions and across 25 components of the energy system; and (7) use of CO2 removal (e.g., DACCS, BECCS) to offset any 26 residual emissions. (high confidence) {6.6} 27 Energy demands and energy sector emissions have continued to rise. From 2015 to 2019, global 28 final energy consumption grew by 6.6%, CO2 emissions from the global energy system grew by 4.6%, 29 and total GHG emissions from energy supply rose by 2.7%. Methane emissions, mainly fugitive 30 emissions from oil, gas, and coal, accounted for 18% of GHG emissions in 2019. Coal electricity 31 capacity grew by 7.6% between 2015 and 2019, as new builds in some countries offset declines in 32 others. Total consumption of oil and oil products increased by 5%, and natural gas consumption grew 33 by 15%. Declining energy intensity in almost all regions has been balanced by increased energy 34 consumption. (high confidence) {6.3} 35 Prices have dropped rapidly over the last five years for several key energy system mitigation 36 options, notably solar PV, wind power, and batteries. From 2015 to 2020, the prices of electricity 37 from PV and wind dropped 56% and 45%, respectively, and battery prices dropped by 64%. Electricity 38 from PV and wind is now cheaper than electricity from fossil sources in many regions, electric vehicles 39 are increasingly competitive with internal combustion engines, and large-scale battery storage on 40 electricity grids is increasingly viable. (high confidence) {6.3, 6.4} 41 Global wind and solar PV capacity and generation have increased rapidly. Solar PV grew by 170% 42 (to 680 TWh); wind grew by 70% (to 1420 TWh) from 2015 to 2019. Policy, societal pressure to limit 43 fossil generation, low interest rates, and cost reductions have all driven wind and solar PV deployment. 44 Solar PV and wind together accounted for 21% of total low-carbon electricity generation and 8% of 45 total electricity generation in 2019. Nuclear generation grew 9% between 2015 and 2019 and accounted 46 for 10% of total generation in 2019 (2790 TWh); hydroelectric power grew by 10% and accounted for Do Not Cite, Quote or Distribute 6-3 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 16% (4290 TWh) of total generation. In total, low- and zero-carbon electricity generation technologies 2 produced 37% of global electricity in 2019. (high confidence) {6.3, 6.4} 3 If investments in coal and other fossil infrastructure continue, energy systems will be locked-in to 4 higher emissions, making it harder to limit warming to well below 2°C. Many aspects of the energy 5 system – physical infrastructure; institutions, laws, and regulations; and behaviour – are resistant to 6 change or take many years to change. New investments in coal-fired electricity without CCS are 7 inconsistent with limiting warming to well below 2°C. (high confidence) {6.3, 6.7} 8 Limiting warming to well below 2°C will strand fossil-related assets, including fossil 9 infrastructure and unburned fossil fuel resources. The economic impacts of stranded assets could 10 amount to trillions of dollars. Coal assets are most vulnerable over the coming decade; oil and gas assets 11 are more vulnerable toward mid-century. CCS can allow fossil fuels to be used longer, reducing 12 potential stranded assets. (high confidence) {6.7} 13 A low-carbon energy transition will shift investment patterns and create new economic 14 opportunities. Total energy investment needs will rise, relative to today, over the next decades, if likely 15 warming is limited to 2°C or below. These increases will be far less pronounced, however, than the 16 reallocations of investment flows that are likely to be seen across sub-sectors, namely from fossil fuels 17 (extraction, conversion, and electricity generation) without CCS and toward renewables, nuclear power, 18 CCS, electricity networks and storage, and end-use energy efficiency. A significant and growing share 19 of investments between now and 2050 will be made in emerging economies, particularly in Asia. (high 20 confidence) {6.7} 21 Climate change will affect many future local and national low-carbon energy systems. The 22 impacts, however, are uncertain, particularly at the regional scale. Climate change will alter 23 hydropower production, bioenergy and agricultural yields, thermal power plant efficiencies, and 24 demands for heating and cooling, and it will directly impact power system infrastructure. Climate 25 change will not affect wind and solar resources to the extent that it would compromise their ability to 26 reduce emissions. (high confidence) {6.5} 27 Electricity systems powered predominantly by renewables will be increasingly viable over the 28 coming decades, but it will be challenging to supply the entire energy system with renewable 29 energy. Large shares of variable solar PV and wind power can be incorporated in electricity grids 30 through batteries, hydrogen, and other forms of storage; transmission; flexible non-renewable 31 generation; advanced controls; and greater demand-side responses. Because some applications (e.g., air 32 travel) are not currently amenable to electrification, 100% renewable energy systems would likely need 33 to include alternative fuels such as hydrogen or biofuels. Economic, regulatory, social, and operational 34 challenges increase with higher shares of renewable electricity and energy. The ability to overcome 35 these challenges in practice is not fully understood. {high confidence} {6.6} 36 Multiple energy supply options are available to reduce emissions over the next decade. Nuclear 37 power and hydropower are already established technologies. Solar PV and wind are now cheaper than 38 fossil-generated electricity in many locations. Bioenergy accounts for about a tenth of global primary 39 energy. Carbon capture is widely used in the oil and gas industry, with early applications in electricity 40 production and biofuels. It will not be possible to widely deploy all of these and other options without 41 efforts to address the geophysical, environmental-ecological, economic, technological, socio-cultural, 42 and institutional factors that can facilitate or hinder their implementation. (high confidence) {6.4} 43 Some mitigation options can provide more immediate and cost-effective emissions reductions 44 than others, but a comprehensive approach will be required over the next ten years to limit 45 warming to well below 2°C. There are substantial, cost-effective opportunities to reduce emissions 46 rapidly in several sectors, including electricity generation and light-duty transportation. But near-term 47 reductions in these sectors will not be sufficient to limit warming to well below 2°C. A broad-based Do Not Cite, Quote or Distribute 6-4 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 approach across the energy sector will be necessary to reduce emissions over the next ten years and to 2 set the stage for still deeper reductions beyond 2030. (high confidence) {6.4, 6.6, 6.7} 3 Enhanced integration across energy system sectors and across scales will lower costs and facilitate 4 low-carbon energy system transitions. Greater integration between the electricity sector and end use 5 sectors can facilitate integration of Variable Renewable Energy (VRE) options. Energy systems can be 6 integrated across district, regional, national, and international scales. (high confidence) {6.4, 6.6} 7 The viable speed and scope of a low-carbon energy system transition will depend on how well it 8 can support sustainable development goals (SDGs) and other societal objectives. Energy systems 9 are linked to a range of societal objectives, including energy access, air and water pollution, health, 10 energy security, water security, food security, economic prosperity, international competitiveness, 11 employment. These linkages and their importance vary among regions. Energy sector mitigation and 12 efforts to achieve SDGs generally support one another, though there are important region-specific 13 exceptions. (high confidence) {6.1, 6.7} 14 The economic outcomes of low-carbon transitions in some sectors and regions may be on par with, 15 or superior to those of an emissions-intensive future. Cost reductions in key technologies, 16 particularly in electricity and light-duty transport, have increased the economic attractiveness of near- 17 term low-carbon transitions. Long-term mitigation costs are not well understood and depend on policy 18 design and implementation, and the future costs and availability of technologies. Advances in low- 19 carbon energy resources and carriers such as next-generation biofuels, hydrogen produced from 20 electrolysis, synthetic fuels, and carbon-neutral ammonia would substantially improve the economics 21 of net zero energy systems. (medium confidence) {6.4, 6.7} 22 Do Not Cite, Quote or Distribute 6-5 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 6.1 Introduction 2 The global energy system is the largest source of CO2 emissions (Chapter 2). Reducing energy sector 3 emissions is therefore essential to limit warming. The energy systems of the future will be very different 4 from those of today if the world successfully limits warming to well below 2°C. Energy will be 5 provided, converted, and used in different ways than it is today (Figure 6.1). Achieving and responding 6 to these changes presents an impressive range of challenges and opportunities. 7 8 Do Not Cite, Quote or Distribute 6-6 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 2 Figure 6.1 Global energy flows within the 2019 global energy system (top panel) and within two 3 illustrative future, net zero CO2 emissions global energy system (bottom panels). Source: IEA, IPCC 4 Database. Flows below 1 EJ are not represented, rounded figures. The illustrative net zero scenarios 5 correspond to the years in which net energy system CO2 emissions reach zero – 2045 in IP1 and 2060 in 6 IP2. Source: IP1: Luderer et al.(2021); IP2: Riahi, K. et al., 2021;IP2 7 8 Within this context, this chapter has two main objectives. First, it aims to assess specific, individual 9 mitigation options in energy supply, energy transformation, and energy transportation and transmission. 10 This assessment is complementary to a set of chapters that explore mitigation options in agriculture, 11 forestry, and other land uses (Chapter 7), urban systems and other settlements (Chapter 8), buildings 12 (Chapter 9), transport (Chapter 10), industry (Chapter 11), and cross-sectoral perspectives (Chapter 12). 13 Second, this chapter aims to assess system-level mitigation opportunities and challenges across the 14 entirety of energy systems. These systems include energy supply, transformation, transmission, storage, 15 transportation, and end-uses. They also include the societal systems that interact with the physical 16 energy system. As energy systems become increasingly integrated and interconnected, a system-wide 17 perspective is necessary for understanding mitigation opportunities and challenges. 18 Within this context, this chapter addresses six topics, each of which is addressed in a separate section. 19 First, Section 6.2 defines the scope of the energy system. Section 6.3 then discusses the recent trends in 20 energy systems that might exert the most significant influence on energy system evolution and options 21 for reducing emissions. Section 6.4 assesses the status and potential of individual energy supply, 22 transformation, storage, transportation and transmission, and integration mitigation options in the 23 energy sector. Section 6.5 explores how climate change might affect energy systems and alter potential 24 energy system mitigation options and strategies. Section 6.6 identifies key characteristics of net zero 25 energy systems – those that emit very little or no CO2. Section 6.7 explores transition pathways toward 26 and through net zero energy systems. Across all of these sections, the chapter aims to explore the ways 27 that energy sector mitigation options and strategies interact with SDGs and other societal and 28 environmental goals. 29 30 Do Not Cite, Quote or Distribute 6-7 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 6.2 The Scope of the Energy System and its Possible Evolution 2 For this chapter, energy systems are defined broadly to include both physical and societal elements. The 3 physical infrastructure includes all the infrastructure and equipment used to extract, transform, 4 transport, transmit, and convert energy to provide energy services. In addition to the physical system, a 5 broad range of societal systems and dynamics are relevant to the energy system. Human societies use 6 energy to transport themselves and the goods that they use and consume, to heat, cool, and light their 7 homes, to cook their food, and to produce goods and services. Energy systems are therefore tied to the 8 systems involved in the provision of these various goods and services. All energy users engage in the 9 operation of energy systems by demanding energy at particular times and in particular forms. They can 10 adjust their behaviour and demands, for example, by using less energy or by changing when they use 11 energy. Consumers can invest in equipment that reduces their energy needs, and they can invest in 12 technologies that transform energy (e.g., rooftop solar) or store energy (e.g., batteries). Firms and 13 governments invest in equipment to produce, transform, and transport energy such as power plants, 14 refineries, electric transmission lines, and oil tankers. All aspects of energy systems are governed by 15 laws, regulations, and actual institutions that reside within businesses and governments at all levels. 16 This includes, for example, rules for trading emissions permits, deciding when particular electricity 17 generation technologies might come online, water management and related environmental rules that 18 define the availability of hydropower or influence water availability for cooling power plants, 19 regulations for injecting CO2 into underground reservoirs or disposing of nuclear waste, and even 20 company policies regarding work hours or teleworking, which can have important implications for 21 energy demand profiles. Many people are employed in the energy sector, and energy system mitigation 22 will eliminate some jobs while creating others. 23 This broader view of energy systems is essential for understanding energy system mitigation, as these 24 broader societal and institutional factors can have an important influence on energy system 25 transformations and the potential to rapidly reduce energy CO2 emissions. Energy system mitigation is 26 as much about the challenges of societal change as it is about the challenges of changes in physical 27 infrastructure, technologies, and operations. While this chapter does not attempt to draw a specific 28 boundary around all the different systems that interact with the energy system, it frequently explores 29 these broader system interactions when assessing different mitigation options and strategies. 30 There is no single spatial scale at which energy systems might be defined and assessed. They can be 31 assessed at the scales of homes, cities, states or provinces, countries, regions, or the entire world. These 32 different scales are frequently both distinct with their own internal dynamics yet also connected to one 33 another. This chapter most frequently assesses energy systems from the country and global perspective. 34 Because the energy system is so complex, it can be hard to define particular parts of it precisely, and 35 there may be competing definitions in the literature. For the purposes of this chapter, “energy supply” 36 encompasses all primary energy, conversion, and transmission processes with the exception of those 37 that use final energy to provide energy services in the end-use sectors (transport, buildings, industry 38 and agriculture). The “energy system” includes energy end uses sectors along with energy supply. 39 “Low-emissions” is used for energy technologies that produce little CO2 or no CO2 or that remove CO2 40 from the atmosphere. Similarly, “low-carbon” transitions is used to describe transitions that limit likely 41 warming to 2°C or below. “Net-zero” energy systems refer to those that produce very little or no CO2 42 or may even sequester CO2 from the atmosphere. 43 44 Do Not Cite, Quote or Distribute 6-8 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 6.3 Recent Energy System Trends and Developments 2 Global energy sector emissions continue to grow but at a decreasing rate 3 Current energy sector emissions trends, if continued, will not limit global temperature change to well 4 below 2°C (high confidence). Global energy system fossil fuel CO2 emissions grew by 4.6% between 5 2015 and 2019 (1.1% yr-1), reaching 38 GtCO2 yr-1 and accounting for approximately two-thirds of 6 annual global anthropogenic GHG emissions. In 2020, with the worldwide COVID pandemic, energy 7 sector CO2 emissions dropped by roughly 2 GtCO2 yr-1 (Figure 6.2). However global energy-related 8 CO2 emissions are projected to rebound by nearly 5% in 2021, approaching the 2018-19 peak (IEA 9 2021d) 10 11 Figure 6.2 Global energy sector fossil fuel CO2 emissions and annual change 2000-2019 (MtCO2 yr-1). 12 (Source: adapted from (Minx et al. 2021a; Crippa et al. 2021) 13 Coal was the single largest contributor to energy sector CO2 emissions between 2015 and 2019, 14 accounting for about 44% of energy sector CO2 emissions in 2019. Oil accounted for about 34% and 15 natural gas accounted for about 22% of energy sector CO2 emissions. Coal, oil and natural gas CO2 16 emissions grew respectively by 1.2%, 2% and 12.7% (annual rates of 0.31%, 0.5% and 3%) (Figure 17 6.3). The electricity sector remains the single largest source of energy sector CO2 emissions, accounting 18 for about 36% in 2019, followed by industry at 22% and transport (excluding international shipping and 19 aviation transport) at about 18% (Figure 6.3). Shipping and aviation accounted for a little over 3%. 20 These proportions have remained relatively unchanged over the last decade. Recent trends reinforce the 21 near-term challenges facing energy sector mitigation - electricity sector emissions continue to rise 22 despite rapid deployment of wind and solar power (see below); transportation emissions continue to 23 rise, and petroleum remains the dominant fuel, despite advances in batteries and electric cars (see 24 below). Some specific sectors, such as shipping and aviation, may present longer-term challenges. 25 Energy supply GHG emissions, including CO2 and non-CO2 greenhouse gases, reached 20 GtCO2-eq 26 yr-1 in 2019, rising by 2.7% between 2015 and 2019 (0.66% yr-1). Approximately 18% of energy supply 27 emissions were non-CO2 emissions. Electricity and heat contributed approximately 69% of total energy 28 supply GHG emissions in 2019 (Figure 6.3). This growth has occurred despite the high penetration of 29 solar PV and wind power, particularly in Asia and developed countries. 30 Fugitive emissions from fossil fuel production, primarily methane, accounted for about 18% of sector 31 supply emissions in 2019, with 2.6 Gt CO2eq yr-1 linked to oil and gas production and 1.3 Gt CO2eq yr- Do Not Cite, Quote or Distribute 6-9 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 1 to coal mining (Crippa et al. 2021). Oil and gas operations produced 2.9 GtCO2eq yr-1 in 2019 (82 Mt 2 yr-1 as methane), split roughly equally between the two (IEA 2020a). There remains a high degree of 3 uncertainty in methane emissions estimates from oil and gas operations despite the emergence of new 4 data from satellites and other measurement campaigns. According to a recent study (Hmiel et al. 2020), 5 methane emissions are underestimated by about 25 to 40%. 6 Global Energy-Sector CO2 Emissions by Fuel Global Energy Sector CO2 Emissions by Sector Global Energy Supply GHG Emissions by Sector Global Energy Supply GHG Emissions by Region 7 Figure 6.3 Global energy sector CO2 emissions and global energy supply GHG emission. Panel a: (IEA 8 2020a), other panels (Crippa et al. 2021) 9 Increasing global energy sector GHG emissions have been driven by rising emissions in some large 10 developing and emerging countries; however, per capita emissions in these countries remain well below 11 those in developed countries (Yu et al. 2019). From 2015 to 2019, Eastern Asia, Southern Asia, and 12 South-East Asia energy sector CO2 emissions grew by 2.4% yr-1, 2.6% yr-1, and 5.1% yr-1, respectively. 13 The relative and absolute shares of Europe and North America have continued to decline, partly due to 14 the growth in other countries (Figure 6.3). Do Not Cite, Quote or Distribute 6-10 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 2 Figure 6.4 Drivers of greenhouse gas emissions across selected regions (Lamb et al. 2021). 3 Despite the declining energy intensity, global energy system CO2 emissions have closely tracked GDP 4 per capita (Figure 6.4). This is especially true in the Asian economies, which have experienced rapid 5 GDP per capita growth in the past decades and a massive rise in energy demand. Similarly, emissions 6 have declined in times of economic downturns – for example, in Eurasia in the 1990s and globally in 7 2009 and 2020. Population growth has also contributed to emissions growth globally and in most 8 regions, particularly Africa, but the effect of population growth has been less than that of economic 9 growth. Since 2015, energy intensity has been declining (IEA 2020b), limiting the impact of economic 10 and population growth. However, there is no region where this factor alone would have been sufficient 11 to decrease CO2 emissions from the energy system. In Europe and North America, the only two regions 12 where emissions decreased meaningfully since 2010, a steady decrease in the carbon intensity of energy 13 was a significant downward driver. The reduction in carbon intensity in the EU is due primarily to the 14 increase of renewable electricity production coupled with the low levels of fossil fuel-based production 15 in the energy mix (Dyrstad et al. 2019). 16 Do Not Cite, Quote or Distribute 6-11 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 Global energy production and demand continue to grow, but at a declining rate 2 Recent changes in the energy system can be viewed within the context of longer-term trends in energy 3 supply and use. Over the last decade, there has been a significant increase in the total primary energy 4 supply (TPES) and major changes in energy sources. From 2015 to 2019, TPES grew by 6.6% (1.6% 5 yr-1) from 569 EJ yr-1 to 606 EJ yr-1. Natural gas consumption grew most quickly during this period, at 6 3.5% yr-1. Coal, oil and oil products grew at annual rates of 0.23% yr-1 and 0.83% yr-1, respectively. In 7 2019, the shares of coal, oil, and natural gas in global TPES were 27%, 31% and 23%, representing 8 only a modest shift from 2015, when the shares were 28%, 32% and 22%, respectively. Renewables, 9 excluding hydropower, grew at an annual rate of 12% yr-1 during this period; however, their share 10 remains marginal in 2019 with just 2.2% of the TPES compared to 1.5% in 2015 (Figure 6.5). Bioenergy 11 (including traditional bioenergy) accounted for 9.4% of the TPES, a similar share compared with 2015. 12 The total final energy consumption (TFC) grew by 6.6% (1.6% yr-1) from 2015 to 2019, rising from 13 392 EJ yr-1 to 418 EJ yr-1. This is a slower growth rate than the previous decade (2.8 % yr-1) (Figure 14 6.5). In 2019, oil products used for transportation accounted for 41% of TFC. The penetration of non- 15 fossil fuels is still marginal despite the significant growth of electric vehicles in recent years. Coal still 16 accounted for 9.5% of TFC in 2019, dropping from 11.7% in 2015. Coal is mainly used as a primary 17 energy source in industry and to a lesser extent in the residential sector. The share of electricity 18 increased modestly, from 18.6% in 2015 to 20.2% in 2019, reflecting increasing access in developing 19 countries and increasing use of electricity for a wide variety of end uses in the residential sector (see 20 Box 6.1). Heat accounts for approximately 3% of TFC, used mainly in industry and the residential 21 sector. Biofuels and waste accounted for 10.4% of TFC in 2019, only modestly changed compared with 22 2015. 23 Figure 6.5 World Total Primary Energy Supply (TPES) (EJ) and total final energy consumption (TFC) 24 2000-2019 (adapted from IEA world energy balances (Minx et al. 2021b)database for IPCC) 25 There are important differences in fuel use across countries. While developed countries almost 26 exclusively use modern fuels, many countries still obtain a significant fraction of their energy from 27 traditional bioenergy (fuelwood and charcoal). Traditional bioenergy (fuelwood and charcoal) is 28 particularly important in sub-Saharan countries and some Asian countries such as India, particularly in 29 the residential sector for cooking. Africa is still characterized by a high share of traditional bioenergy 30 in TPES and TFC. In 2019, biomass and waste in Africa accounted for 44% of the TPES. The global 31 average was 9.4%. 32 Asia has been particularly important in TFC growth since 2015. In 2019, Eastern Asia accounted for 33 more 24% of TFC (1.52% annual growth from 2015). In contrast, TFC has increased by only 0.58% in 34 Europe and 1.24% in North America. Despite an increase of 2.05% over the same period, Africa’s TFC 35 remains relatively low (6.1% of global TFC), particularly in sub-Saharan countries. Approximately 860 36 million people, mostly in sub-Saharan Africa and some Asian countries, lacked access to electricity and Do Not Cite, Quote or Distribute 6-12 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 about 2.65 billion to clean-cooking facilities in 2018 (IEA 2019a). Achieving universal energy access 2 (SDG-7) will require energy transitions in the domestic sector, including new developments in off-grid 3 energy technologies, emphasis on rationalizing energy subsidies, and increasing efforts to address 4 health concerns related to the use of traditional fuels (Box 6.1). 5 Non-climate factors continue to drive energy systems changes 6 While energy system changes are vital to climate mitigation, recent energy system changes have arisen 7 in response to a much broader set of factors. Important factors include economic growth, energy access, 8 energy justice, energy security, air pollution, technological progress in low-emissions technologies, 9 local job creation. Several of these are discussed here. 10 Energy Access. Between 2000 and 2019, the proportion of the population with access to electricity 11 increased from 73% to 90% (IEA 2020c). Although most of those people gaining access to energy have 12 gained access to fossil fuel-based electricity, an increasing number are gaining access to electricity from 13 renewable sources. Low-emissions, decentralised systems are proving a cost-effective way to provide 14 electricity in rural areas (Scott et al. 2016; IEA 2019b; Muchunku et al. 2018), although the use of diesel 15 generators continues in some remote areas. Between 2000 and 2019 the proportion of the population 16 with access to clean cooking (modern fuels and/or improved biomass cookstoves) rose from 52% to 17 66%. 18 Energy Security. The ability of countries to maintain access to reliable and affordable energy resources 19 continues to shape energy policy. Energy security is perceived as a national security issue and often 20 prioritized over climate concerns (Nyman 2018). The linkage between climate and energy security is 21 now widely recognized (Toke and Vezirgiannidou 2013, Fu et al. 2021; La Viña et al. 2018; Blarke and 22 Lund 2007; World Energy Council 2020; United Nations 2021). Approaches to energy security are 23 frequently driven by the scope of domestic energy resources. For example, energy security concerns 24 have led to continued reliance on domestic coal production and consumption (Jakob et al. 2020) and 25 increased investment in domestic renewable generation (Konstantinos & Ioannidis, 2017). LNG 26 Importers have diversified their sources as reliance on LNG has increased (Vivoda 2019). 27 Air Pollution. The energy system is an important source of air pollution, including both indoor and 28 outdoor air pollution. Efforts to address air pollution in several countries and regions (the U. S., Mexico, 29 China, India, European Union, Africa, Southeast Asia, among others) have had an importance influence 30 on energy system changes (Bollen and Brink 2014, Fang et al. 2019). Policies aimed at controlling NOX 31 and SO2 emissions have driven emissions abatement efforts and coal fleet retirements (Drake & York, 32 2021) (Singh and Rao 2015). In some places, the prospect of reducing local air pollution remains more 33 salient to policymakers and the public than climate mitigation when deciding to tighten regulations on 34 coal use (Brauers & Oei, 2020). 35 Technology and costs. Costs for renewable technologies have fallen significantly in recent years, 36 driving significant changes in electricity production and transportation (see below). These advances are 37 not divorced from climate and other environmental concerns (Kuik, Branger, & Quirion, 2019; 38 Timilsina & Shah, 2020). Recent advances in PV cells, for example, can be traced in part to aggressive 39 deployment policies spurred by energy security, climate, and other environmental concerns (Kreuz and 40 Müsgens 2017, 6.3.5, 6.4.2). The falling costs of batteries, manly Li-ion batteries, has boosted the 41 competitiveness of electric vehicles (6.3.7. Nykvist et al. 2015). 42 START BOX 6.1 HERE 43 Box 6.1 Energy access, energy systems, and sustainability Do Not Cite, Quote or Distribute 6-13 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 Successful mitigation must work in tandem with fundamental development goals such as access to 2 modern forms of energy. In many developing countries, access to electricity, clean cooking fuels, and 3 modern and efficient energy remain an essential societal priority. This is particularly true in sub-Saharan 4 Africa and several Asian countries. SDG7 on universal access to modern energy includes targets on 5 modern energy services, renewable energy, and energy efficiency, which implies a profound 6 transformation of the current energy systems. Although there are different definitions of energy access, 7 the ultimate goal is universal access to clean and modern fuels. 8 9 BOX 6.1 Figure 1 Measuring access to energy (ESMAP-World Bank, 2015) 10 Despite progress in some countries such as India, Bangladesh and Kenya, 860 million people were 11 without access to electricity in 2018, compared with 1.2 billion in 2010. About 2.65 billion households 12 were cooking with solid fuels, distributed across Asia and Africa (IEA et al. 2020). Around 850 million 13 people in sub-Saharan Africa relied on traditional biomass (firewood and charcoal) for cooking, and 60 14 million relied on kerosene and coal to meet their energy needs (IEA 2018a). Air pollution was likely 15 responsible for 1.1 million deaths across Africa in 2019 (Fisher et al. 2021). It has been estimated that 16 2.2 billion people will still be dependent on inefficient and polluting energy sources for cooking by 17 2030, mainly in Asia and Sub-Saharan Africa, and 650 million people are likely to remain without 18 access to electricity in 2030, 90% of whom will reside in Sub-Saharan Africa (IEA et al. 2020). 19 Research indicates that decentralised and on-grid renewables are likely the least cost options to provide 20 universal access to electricity by 2030 (Section 6.4.2). Natural gas, LPG, and improved biomass 21 cookstoves are the most important options for cooking. Universal access to electricity and clean cooking 22 requires a rapid shift from traditional biomass to cleaner fuels and/or clean cooking technologies (IEA 23 et al. 2020). It has been estimated that the provision of electricity and clean cooking for all would require 24 USD 786 billion in cumulative investment to 2030, equal to 3.4% of total energy sector investment over 25 the period (IEA 2017). 26 Even without universal access to modern energy, increased access will substantially affect energy 27 systems, particularly electricity systems through the deployment of renewable energy, LPG, and 28 biomass supply chains. Universal access for households, however, will have a minimal impact on global 29 energy demand; it has been estimated that universal access for household will increase energy demand 30 by 0.2% in 2030 (37 Mtoe yr-1) relative to a future without any change in access to modern energy 31 (citation) 32 [END BOX 6.1 HERE] 33 There have been initial efforts to phase out coal but only modest declines in use Do Not Cite, Quote or Distribute 6-14 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 Global coal consumption has been declining, with small fluctuations, since it peaked in 2013 (IEA 2 2020d). Coal is faring differently across regions. Coal use has been decreasing in the OECD regions, 3 particularly in the U.S. and the European Union, while remaining mostly flat in China after a period of 4 growth, and it is continuing to increase in other major developing Asian economies (IEA 2020d). Trends 5 in the electricity sector, where most coal is being consumed, are similar. Growth in coal-fired electricity 6 generation capacity in the Asia Pacific region has offset retirements in North America and Europe 7 (Jakob et al. 2020). 8 Reductions in coal consumption have been driven in large part by non-climate factors, most notably 9 environmental regulations to address air pollution, rapidly declining costs of renewables, and lower 10 natural gas prices, especially inexpensive unconventional gas in the U.S. (Diluiso et al 2021; 11 Vinichenko et al., 2021; Culver and Hong 2016). Older coal-fired power plants that cannot meet new 12 environmental regulations or have become unprofitable or uncompetitive have been closed in many 13 regions. Moreover, coal power expansion has slowed down in Asia, as countries have suspended and 14 cancelled new projects for reasons such as overcapacity, environmental constraints, and the 15 development of renewables (see Box 6.2). 16 Different regions have replaced retired coal with different energy sources. Old coal fleets have been 17 replaced approximately half by gas and half by renewables in the U.S., mainly by renewables in the 18 European Union, and by advanced coal plants and renewables in Asia (EMBER 2020). Replacing old 19 coal with new coal facilities is inconsistent with limiting warming to 2ºC or below {high confidence} 20 (Pfeiffer et al. 2016, 2018; Smith et al. 2019; Tong et al. 2019, Section 6.7.4). 21 Major coal consuming countries with abundant coal reserves remain far from phasing out coal (Spencer 22 et al. 2018; Edenhofer et al. 2018). In most developing countries with large coal reserves, coal use has 23 been increasing to support energy security and because it is perceived to have lower costs than 24 alternatives (Steckel et al. 2015; Kalkuhl et al 2019). However, coal faces increasing business risks 25 from the decreasing costs of alternative, low-emissions energy sources and increasing focus on air 26 pollution and other environmental impacts from coal mining and use (Garg et al. 2017; Sovacool et al 27 2021). Continued coal builds, mostly in developing countries, will increase the risks of stranded assets 28 (see Box 6.13) (Farfan Orozco 2017; Saygin et al. 2019; Cui et al. 2019). 29 Economic, social, and employment impacts of accelerated coal phaseouts tend to be significant in coal- 30 dependent regions. Tailored reemployment has been used to support coal transitions in some regions. 31 Although some estimates show higher employment opportunities from low-carbon energy (Garrett- 32 Peltier 2017), results vary across regions. Moreover, even with a net increase in total employment, in 33 the long run, renewable jobs are often located outside of coal regions and require different skill sets 34 from the coal industry (Spencer et al. 2018). In a broader sense, achieving a “just transition” also 35 requires managing the impacts on regional economic development for coal-dependent communities and 36 the effects of higher energy prices for consumers and energy-intensive industries through a 37 comprehensive policy package (see Box6.2) (Jakob et al. 2020; Green and Gambhir 2020). 38 [START BOX 6.2 HERE] 39 Box 6.2 Status and Challenges of a Coal Phase-Out 40 Limiting global warming to 2ºC or below requires a rapid shift away from unabated coal consumption 41 (coal without CCS) in the energy system by 2050 (IPCC 2018a Section 6.7, Chapter 3). This will require 42 cancellation of new coal power projects and accelerated retirement of existing coal plants (Pfeiffer et 43 al. 2018; Edenhofer et al. 2018; Tong et al. 2019, Kriegler et al. 2018Smith et al. 2019). To limit 44 warming to 2ºC or below, and without new builds, existing coal plants will need to retire 10 to 25 years 45 earlier than the historical average operating lifetime. Completing all planned projects will further reduce 46 the viable lifetime of all plants by 5 to 10 years if warming is to be limited to 2ºC or below (Cui et al. Do Not Cite, Quote or Distribute 6-15 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 2019). Phasing-out coal in the next few decades will present economic, social, and security challenges. 2 These will vary across regions based on the characteristics of existing coal infrastructure, the availability 3 of alternatives, economic development, and technological and institutional lock-in (Jakob et al. 2020). 4 5 6 Box 6.2 Figure 1 Retirement of coal-fired power plants to limit warming to 1.5°C and likely 2°C. (a) 7 Historical facility age at retirement (b) the vintage year of existing units, (c) global coal capacity under 8 different plant lifetimes, compared to capacity levels consistent with a well-below 2°C (green) and 1.5°C 9 (blue) pathway assuming no new coal plants, and (d) and assuming plants currently under construction 10 come online as scheduled, but those in planning or permitting stages are not built. (Source: (Cui et al. 11 2019)). 12 Between 2015 and 2019, global coal power capacity grew by 146 GW, or 7.6%, as new builds offset 13 retirements in some countries (Global Energy Monitor et al. 2021). Meanwhile, an increasing number 14 of countries and regions have committed to or operationalised coal phase-outs (Jewell et al. 2019; Watts 15 et al. 2019; Littlecott et al. 2021). Actions are being taken by various international and subnational 16 actors, including national and subnational governments, public and private power companies, and 17 financial institutions and pension funds that have committed not to fund new coal or coal-based 18 infrastructure (yan Nie et al. 2016; Buckley 2019; Auger et al. 2021). Although these initial efforts are 19 not yet sufficient in limiting warming to 1.5°C, and most have occurred in regions with older coal fleets, 20 these examples provide insight into possible coal phaseout strategies (Spencer et al. 2018) and help 21 identify the mechanisms driving the move away from coal, such as market, technology, policy, or other 22 societal objectives. They also enable better understanding of the possible character of oil and gas phase- 23 downs that would ultimately be needed to limit warming two well below 2°C (Section 6.7.4; (Raimi et 24 al. 2019). 25 Europe: Several European countries are part of the Powering Past Coal Alliance (PPCA) and have 26 committed to phase-out unabated coal on or before 2030 (Jewell et al. 2019). Because these countries 27 represent a small share of global coal generation capacity and have mostly ageing coal plants, they tend Do Not Cite, Quote or Distribute 6-16 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 to face fewer changes in phasing out coal. The effectiveness of PPCA in countries with younger coal 2 fleets has thus been questioned (Jewell et al. 2019; Blondeel et al. 2020). Germany recently joined the 3 PPCA and has committed to phaseout unabated coal by 2038. As part of its commitment to phase out 4 coal, Germany is implementing a set of measures that include compensation for power plant closures, 5 labour market measures for coal workers, and substantial support of structural change in coal-mining 6 regions. Poland, another coal-heavy country in Europe, has not indicated a coal phaseout target and 7 faces substantial challenges (Whitley et al. 2017; Antosiewicz et al. 2020). European efforts to phase 8 out coal indicate that appropriate financial instruments are needed (Rentier et al. 2019), and a just 9 transition for workers are important to gain broad public support and help those most affected by the 10 phaseout (Johnstone and Hielscher 2017; Osička et al. 2020). 11 North America: Coal use has been declining in North America. In the U.S., the primary driver has 12 been the availability of cheap shale gas and ageing coal fleets. Coal use in the US has dropped by over 13 50% since 2008 (EIA 2019). The recently announced NDC by the Biden Administration sets a 100% 14 carbon-free electricity goal by 2035 (The White House 2021), indicating a phaseout not only of 15 unabated coal electricity generation, but also of natural gas generation. As one of the two founding 16 countries of the PPCA, Canada has committed to phasing out unabated coal power by 2030 17 (Government of Canada 2018). Declining coal use in both the U.S. and Canada has decreased GHG 18 emissions, local air pollutants, and cooling water use (Harris et al. 2015; Kondash et al. 2019). However, 19 there have been concerns about social and economic consequences, particularly at the local level. For 20 instance, the U.S. has lost about 50,000 coal mining jobs between 2011 and 2021 (U.S. Bureau of Labor 21 Statistics, 2021), with significant regional and economic inequities (Bodenhamer 2016; Abraham 2017; 22 Greenberg 2018). Comprehensive social programs, such as retirement compensation, training for 23 reemployment, and business support for economic diversification, have been suggested as means to 24 support a just transition (Patrizio et al. 2018; Homagain et al. 2015; Grubert 2020). 25 Asia: After a period of rapid growth, coal expansion has slowed in Asia, but it still the primary driver 26 of the global increase in coal demand (IEA 2020e). China's coal consumption reached a plateau under 27 policy efforts during the 13th Five-Year Plan (2016-2020), and new coal plants are being built at a slower 28 rate than previously. Both China and India have suspended and cancelled many new coal power projects 29 and retired a small set of old, dirty, inefficient coal plants (Global Energy Monitor et al. 2021; CEA 30 2019). These efforts are largely due to non-climate reasons, such air pollution and health (Singh and 31 Rao 2015; Gass et al. 2016; Peng et al. 2018; Malik et al. 2020), overcapacity (Blondeel and Van de 32 Graaf 2018), and rural electrification and renewable investments (Aklin et al. 2017; Thapar et al. 2018). 33 However, as new builds offset retirements, coal generation capacity has continued to grow in both 34 countries since 2015 (Global Energy Monitor et al. 2021). Other fast-growing Southeast Asian 35 countries, such as Indonesia, Vietnam, and Philippines have experienced strong growth in coal use (IEA 36 2020b), but an increasing number of new coal power projects are being cancelled (Littlecott et al. 2021). 37 Coal projects in these countries are decreasingly likely to proceed because they rely on international 38 financing, and China, Japan, United States, and other G7 countries have pledged to end overseas coal 39 financing (Schiermeier 2021). 40 Africa: New coal power projects in Africa have been declining since 2016, with only South Africa and 41 Zimbabwe currently building new coal plants and several others has planned projects (Littlecott et al. 42 2021). However, these projects also largely depend on international financing and are thus less likely 43 to be implemented (see above). In South Africa, employment in the coal mining sector has dropped by 44 almost half since the 1980s and is has been estimated to fall from 77,00 today to 22,000 to 42,000 by 45 2050 (Strambo et al. 2019; Cock 2019). Policy and financial support are essential to ensure a sustainable 46 transition for these workers (Swilling et al. 2016). 47 [END BOX 6.2 HERE] Do Not Cite, Quote or Distribute 6-17 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 Solar and wind energy have grown dramatically, but global shares remain low relative to other 2 sources 3 Global PV and wind electric capacities grew 170% and 70%, respectively, between 2015 and 2019. 4 Total solar and wind capacities in 2019 were 609 GW and 623 GW (Figure 6.6) and generation was 5 680 TWh yr-1 and 1420 TWh yr-1. The combined share of solar and wind in the total global electricity 6 generation in 2019 was around 8% (5.5% wind, 2.5% solar), up from around 5% in 2015 (IEA 2021a). 7 Since 2015, the cost of solar PVs has declined by over 60%. Offshore wind costs have fallen by 32%, 8 and onshore wind costs have fallen by 23% (Section 6.4). PV was around 99% of total solar capacity in 9 2019; onshore wind was about 95% of total wind capacity. Concentrating solar power (CSP) 10 deployment has also continued to grow, but it remains far below PV. Prior to 2010, 50% of all wind 11 capacity was in Europe, but, since then, capacity growth in Asia, led by China, has surpassed the growth 12 in Europe. As a consequence, Europe’s share in global solar capacity has declined from 74% in 2010 13 to 24% in 2019. Asia’s share in wind and solar capacity in 2019 was 41% and 56%, followed by Europe 14 (31% and 24%) and North America (20% and 12%) (IRENA 2021a, 2020a). 15 16 Figure 6.6 Global solar and wind electricity installed capacities (GW) from 2015–2019 and their 17 combined share in total electricity generation Source: data from (IEA 2021a) IRENA, 2021). 18 Although the shares of wind and solar remains low in the global total electricity generation, recent 19 growth rates signal the potential for these technologies to support substantial mitigation. The prospects 20 for a continuation of recent growth rates will depend on meeting key challenges such as rapidly 21 integrating wind and solar into electricity grids (Section 6.6.2, Box 6.8) and retiring fossil power plants 22 (see above). 23 Low-carbon energy sources beyond wind and solar have continued to grow 24 Low-carbon energy sources such as nuclear, hydropower, bioenergy, geothermal, marine, and fossil or 25 bioenergy with CCUS have continued to grow since 2015 (IEA, 2017; IEA, 2021a). Hydroelectric 26 power grew from 3890 TWh yr-1 (14.0 EJ yr-1) in 2015 to 4290 TWh yr-1 (15.5 EJ yr-1) in 2019, or 27 10.3%; nuclear power grew from 2570 TWh yr-1 (9.3 EJ yr-1) to 2790 TWh yr-1 (10.1 EJ yr-1), or 8.6%. 28 Hydroelectric and nuclear shares in global total electricity generation remained around 16% and 10%, 29 respectively (IEA, 2017; IEA 2021a). Global biofuels production grew from 3.2 EJ yr-1 to 4.0 EJ yr-1 30 from 2015 to 2019 (IEA, 2017; IEA 2021a). Bioenergy accounted for 2.4% of electricity generation in 31 2019. Geothermal energy sources produced 92 TWh yr-1 (0.33 EJ yr-1) of electricity in 2019, up from 32 80 TWh yr-1 (0.28 EJ yr-1) in 2015 (IEA, 2017; IEA 2021a). At present, there are 28 commercially Do Not Cite, Quote or Distribute 6-18 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 operating CCUS facilities with a CO2 removal capacity of around 40 million tonnes yr-1 (Mtpa). Only 2 two of these are associated with electricity production; the majority are in industrial applications. 37 3 commercial projects, accounting for about 75 Mtpa, are in various stages of development and 4 construction (Global CCS Institute 2020). The share of marine energy in the global electricity 5 generation has remained at approximately 1 TWh yr-1 since 2015. In total, low- and zero-carbon 6 electricity generation technologies produced 37% of global electricity in 2019. 7 Battery prices have dropped substantially, spurring deployment in electricity and transportation 8 Recent years have seen a rapid decline in the cost of energy storage, particularly batteries (see Section 9 6.4.4). The price of lithium-ion batteries (LIBs) has declined by 97% in the past three decades and by 10 90% in the past decade alone (IEA 2021a; Ziegler and Trancik 2021)These declines have important 11 implications for the energy systems, most notably in supporting increased deployment of variable 12 renewable electricity (VRE) generation and electrification of the vehicle fleet. 13 Battery electricity storage has emerged as an important for supporting the flexibility of electricity 14 systems as they accommodate rising shares of VRE. Although pumped-storage hydropower systems 15 accounted for 160 GW, or over 90%, of total energy storage capacity in 2019 (IEA 2020c), battery 16 energy storage systems, led by Li-ion technology, have accounted for over 90% of new capacity 17 addition since 2015 (IRENA 2019a). In 2019, 10 GW of batteries were connected at the grid and 18 consumer level, rising from 0.6 GW in 2015 (IEA 2020c; IEA WEO 2019). 19 In California, in the U.S., legislation was passed to procure around 1.3 GW energy storage (excluding 20 pumped storage) by 2020. One of the largest utility-scale battery storage facilities (300 MW) recently 21 went online in California (Vistra Corp. 2021). Other major projects are in Florida in the US (409 MW), 22 London in the UK (320 MW), Lithuania (200 MW), Australia (150 MW), Chile (112 MW) and 23 Germany (90 MW), (Katz 2020; ARENA 2020; IRENA 2019a). 24 The drop in battery prices has also had important implications in the transportation sector. Automotive 25 LIB production rose from around 40 GWh in 2015 to 160 GWh in 2020 (32%). The stock of battery 26 electric vehicles (BEVs) grew from around 0.7 million in 2015 to 4.8 million in 2019 (IEA 2020d). The 27 number of publicly accessible vehicle chargers reached 1.3 million in 2020, 30% of which were fast 28 chargers. The average battery size of BEVs reached 67 kWh in 2019 due to consumer preferences and 29 government incentives for long-range vehicles (Agency 2020; IEA 2021b). 30 The energy policy landscape continues to evolve 31 The current energy sector policy landscape consists of policy mixes or policy packages, including 32 regulatory, market-based and other approaches. These mixes have evolved over time and include many 33 sectoral but also some economy-wide policy instruments, such as carbon pricing, subsidies. 34 Governments have chosen a mix of policies and institutional mechanisms that consists of regulatory 35 instruments, like efficiency and technology standards, economic instruments (e.g. carbon pricing, 36 subsidies) (Bertram et al. 2015; Martin and Saikawa 2017) and other policies, such as government 37 interventions to provide infrastructure, information policies, and voluntary actions by non-government 38 actors (Somanathan et al. 2014). In recent years, regulatory instruments to promote low-carbon 39 infrastructure have gained traction in developing countries (Finon 2019). The choice of policies has 40 depended on institutional capacities, technological maturity and other developmental priorities of 41 governments. For example, governments have favoured regulatory instruments over economic 42 instruments when there has been sufficient institutional capacity to implement and monitor the 43 regulations and standards (Hughes and Urpelainen 2015). Furthermore, institutional capacity has also 44 determined the extent of implemented measures (Adenle et al. 2017). Market conditions and 45 technological maturity are other important determinants of policy mixes being deployed in the energy Do Not Cite, Quote or Distribute 6-19 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 sector. For example, subsidies for mitigation like feed-in-tariffs (FIT) have worked best when the 2 technologies are in nascent stages of development (Gupta et al. 2019a). 3 On the other hand, market-based instruments like emission trading schemes (ETS) and auctions coupled 4 with a regulatory framework have been a favourable strategy for more mature technologies (Polzin et 5 al. 2015; Kitzing et al. 2018). FIT, tax incentives, and renewable portfolio standards - despite potentially 6 substantial program costs (Andor and Voss 2016; Abrell et al. 2019) - have played a significant role in 7 attracting foreign direct investments in the renewable sector (Wall et al. 2019). Subsidies and carbon 8 pricing have also played an important role in mainstreaming these renewable energy sources (Best and 9 Burke 2018). Recently, subsidy-free investments in renewables, e.g. wind offshore (Jansen et al. 2020), 10 backed by power purchase agreements, have gained momentum (Frankfurt School-UNEP Centre and 11 BNEF 2020). Similar considerations apply for policy mixes targeted to other sectors, for example 12 transport and buildings. 13 The role of carbon pricing is still limited though increasing. Different measures have been suggested to 14 improve the performance of the ETS, such as “price floors and caps” and other carbon pricing schemes 15 (Bataille et al. 2018; Campiglio 2016; Goulder and Morgenstern 2018). In 2020, 61 regional, national 16 and sub-national carbon pricing instruments, representing 22% of the global GHG emissions, were in 17 action or scheduled for implementation (World Bank 2019). Over 51% of emissions covered are priced 18 at less than USD 10 per tCO2-e.. At present, however, only 5% of the global emissions covered under 19 carbon pricing initiatives are consistent with the range of carbon prices that have been suggested as 20 needed to limit warming to well below 2°C (Stiglitz and Stern 2017). Most of the carbon pricing 21 schemes have taken place in the OECD countries. The limited application of carbon pricing instruments 22 in developing, and emerging economies may be due to political economy constraints (Campiglio 2016; 23 Finon 2019). Carbon pricing had a sizeable impact on emissions , e.g. the EU ETS impacts emissions 24 from electricity in Germany (Schäfer 2019) and manufacturing in France (Colmer et al.), respectively. 25 Emission reductions could be increased with higher carbon prices and without free allocation of 26 allowances. 27 In the absence of a global comprehensive carbon price, regional regulatory policies for fossil fuels 28 supply and key demand sectors like transport, industry and buildings (Chapters 9-11), coupled with 29 regional carbon pricing instruments, were implemented to help initiating the climate actions consistent 30 with the Paris agreement (Kriegler et al. 2018). However, differences in the stringency of climate 31 regulation has triggered fear that regulation reduces the competitiveness of industries in regulated 32 countries and lead to industry re-location and “carbon leakage” (Schenker et al. 2018). In recent years, 33 however, there is little evidence of carbon leakage (Schäfer 2019; Naegele and Zaklan 2019), and even 34 positive effects of carbon pricing on efficiency have been observed (e.g., Löschel et al. 2019, for 35 German manufacturing firms, and (Germeshausen 2020) for German power plants). However, with 36 asymmetric rising carbon prices, discussions about specific policy mechanisms to address carbon 37 leakage like carbon border adjustments (Cosbey et al. 2019) were amplified. Furthermore, multiple 38 policies - often implemented by different governmental levels (national vs subnational) - interacted with 39 each other and thereby affected their environmental and economic effectiveness. Recent examples 40 include interactions of ETS with renewable support policies (e.g. Boehringer and Behrens 2015; Del 41 Rio 2017), energy efficiency policies (e.g. Wiese et al. 2018) or electricity market reform (e.g. Teng et 42 al. 2017), respectively. 43 Apart from explicit carbon pricing, various implicit carbon pricing mechanisms such as fossil fuel taxes 44 and removal of fossil fuel subsidies (see Box 6.3) and regulatory instruments are used by many countries 45 as part of their climate policies. In addition, public provision and procurement of low-carbon 46 infrastructure and technologies such as energy-efficient devices, renewable energy, and upgrades in 47 electricity grids through state-sponsored institutions and public-private partnerships have played an 48 important role in low-carbon development (e.g., (Baron 2016)). Do Not Cite, Quote or Distribute 6-20 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 [START BOX 6.3 HERE] 2 Box 6.3 Energy Subsidies 3 Energy subsidies continue to be widely applied. Global fossil fuel subsidies represent more than half of 4 total energy subsidies with predominantly adverse environmental, economic, and social effects (high 5 confidence). 6 Energy subsidies can be defined as policy measures in the energy sector to lower the prices for 7 consumers, raise the prices for producers, or reduce energy production costs (IEA 1999). There are 8 subsidies for fossil fuels, renewables, and energy efficiency measures. The majority of the renewable 9 subsidies are generation-based incentives for solar, wind or biomass in the form of feed-in-tariffs (FIT) 10 (Chapter 13), with total annual renewable subsidy estimates of about USD 150 billion yr-1 globally 11 (IEA 2018b). Estimates of fossil fuel subsidies can vary by an order of magnitude. For the year 2017, 12 the IEA estimated fossil fuel subsidies of USD 300 billion using IEA’s pre-tax, price-gap method (IEA 13 2018b), while the IMF included unpriced externalities in calculating subsidies of USD 5.2 trillion or 14 6.5% of global GDP (World Bank 2019; Coady et al. 2017, 2019). It has been estimated that the amount 15 spent on fossil fuel subsidies was around double the amount of subsidies spent on renewables (IEA 16 2018b). There are adverse environmental, economic and social consequences of fossil fuel subsidies 17 (Rentschler and Bazilian 2017). More than 75% of the distortions created by fossil fuel subsidies are 18 domestic, and studies indicate that reforming them can have substantial in-country benefits (Coady et 19 al. 2019, 2017). Some of the G-20 countries have implemented subsidy reforms based on low oil prices 20 (Jewell et al. 2018). 21 Fossil fuel subsidies most commonly pursue non-climate objectives, for example, enhanced access to 22 energy sources (high confidence). In some cases, these energy access subsidies have helped extend 23 modern energy sources to the poor (Kimemia and Annegarn 2016) and thereby contribute to SDG-7. 24 However, the subsidies have proven to be regressive in most cases, with little benefit reaching the poor 25 (Lockwood 2015). For example, Indonesia has introduced liquefied petroleum gas (LPG) subsidies for 26 cooking. The kerosene to LPG conversion program (“Zero Kero”) was launched in 2007 and provided 27 mainly households with free initial LPG equipment and LPG at a low subsidized price (Thoday et al. 28 2018; Imelda et al. 2018b). Besides the national government, provincial governments and industry 29 played a crucial role in implementation. Overall, the LPG conversion program in Indonesia reduced 30 cooking kerosene use (Andadari et al. 2014; Imelda et al. 2018b) and GHG emissions (Permadi et al. 31 2017) with positive health effects (Thoday et al. 2018; Imelda et al. 2018b). However, the program is 32 generally viewed as regressive and has failed to reduce traditional solid fuel use (Andadari et al. 2014; 33 Toft 2016; Thoday et al. 2018). Furthermore, even if the program decreased greenhouse gas emissions 34 relative to continued kerosene use, these subsidies are still targeted at fossil fuels and contribute to GHG 35 emissions. 36 India started a large LPG program in 2015 that provided a capital cost subsidy to poor households (e.g. 37 Kar et al. 2019; Jose et al. 2018; Gould 2018). While the program has increased adoption of LPG in 38 India (e.g. Sharma et al. 2019), it has not yet achieved a sustained use of LPG and replacement of solid 39 fuels for cooking, amplifying the need for complementary policy measures ( Gould 2018; Kar et al. 40 2019; Mani et al. 2020). The climate impacts of switching from biomass to LPG depend on the degree 41 of biomass combustion in stoves and the extent to which biomass originates from non-renewable 42 sources (Jose et al. 2018; Singh and Rao 2015). Barriers to increasing LPG use for cooking further 43 included abundance of solid fuels at zero (monetary) costs (Mani et al. 2020) as well as benefits of solid 44 fuels, such as maintaining the traditional taste of food and space heating in colder seasons (Gould 2018; 45 Sharma et al. 2020). 46 [END BOX 6.3 HERE] Do Not Cite, Quote or Distribute 6-21 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 2 3 6.4 Mitigation Options 4 6.4.1 Elements of Characterization 5 This section characterizes energy system mitigation options and discusses which factors enable and 6 inhibit their implementation. We touch on a broad range of factors that may enable and inhibit the 7 implementation of mitigation options by considering six dimensions that affect their feasibility (Table 8 6.1, Annex II.11). The assessment aims to identify which mitigation options can be readily 9 implemented and which face barriers that would need to be overcome before they can be deployed at 10 scale. 11 Table 6.1 Dimensions and indicators to assess the barriers and enablers of implementing mitigation 12 options in low carbon energy systems. Metric Indicators Geophysical: Are the Physical potential: physical constraints to implementation required resources available? Geophysical resources (including geological storage capacity): availability of resources needed for implementation Land use: claims on land where an option would be implemented Environmental-ecological: Air pollution: increase or decrease in air pollutants, such as NH 4, CH4 and What are the wider fine dust environmental and ecological Toxic waste, mining, ecotoxicity and eutrophication impacts of the option? Water quantity and quality: changes in the amount of water available for other uses Biodiversity: changes in conserved primary forest or grassland that affect biodiversity, and management to conserve and maintain land carbon stocks Technological: Can the Simplicity: is the option technically simple to operate, maintain and integrate required option be upscaled Technology scalability: can the option be scaled up, technically soon? Maturity and technology readiness: R&D and time needed to implement the option Economic: What economic Costs in 2030 and in the long term: investment costs, costs in USD tCO 2-eq-1 conditions can support or Employment effects and economic growth: decrease or increase in jobs and inhibit the implementation of economic welfare the option? Socio-cultural: What social Public acceptance: the extent to which the public supports the option and conditions could support or will change their behaviour accordingly inhibit acceptance, adoption, Effects on health and wellbeing and use of the option? Distributional effects: equity and justice across groups, regions, and generations, including energy, water, and food security and poverty Institutional: What Political acceptance: the extent to which politicians support the option institutional conditions could Institutional capacity and governance, cross-sectoral coordination: capability support or inhibit the of institutions to implement and handle the option implementation of the Legal and administrative capacity option? 13 14 6.4.2 Energy Sources and Energy Conversion 15 6.4.2.1 Solar Energy 16 Solar PV is increasingly competitive with other forms of electricity generation and is the low-cost option 17 in many applications (high confidence). Costs have declined by 62% since 2015 (high confidence) and Do Not Cite, Quote or Distribute 6-22 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 are anticipated to decline by an additional 16% by 2030 if current trends continue (low confidence, 2 medium evidence). Key areas for continued improvement are grid integration and non-module costs for 3 rooftop systems (high confidence). Most deployment is now utility-scale (high confidence). Global 4 future potential is not limited by solar irradiation, but by grid integration needed to address its 5 variability, as well as access to finance, particularly in developing countries (high confidence). 6 The global technical potential of direct solar energy far exceeds that of any other renewable energy 7 resource and is well beyond the total amount of energy needed to support ambitious mitigation over the 8 current century (high confidence). Estimates of global solar resources have not changed since AR5 9 (Lewis 2007; Besharat et al. 2013) even as precision and near-term forecasting have improved (Abreu 10 et al. 2018; Diagne et al. 2013). Approximately 120,000 TW of sunlight reaches the Earth’s surface 11 continuously, almost 10,000 times average world energy consumption; factoring in competition for 12 land-use leaves a technical potential of about 300 PWh yr-1 (1080 EJ yr-1) for solar PV, roughly double 13 current consumption (Dupont et al. 2020). The technical potential for concentrating solar power (CSP) 14 is estimated to be 45–82 PWh yr-1 (162–295 EJ yr-1) (Dupont et al. 2020). Areas with the highest solar 15 irradiation are western South America; northern, eastern and southwestern Africa; and the Middle East 16 and Australia (Figure 6.7) (Prăvălie et al. 2019). 17 In many parts of the world, the cost of electricity from PV is below the cost of electricity generated 18 from fossil fuels, and in some, it is below the operating costs of electricity generated from fossil fuels 19 (high confidence). The weighted average cost of PV in 2019 was USD 68 MWh-1, near the bottom of 20 the range of fossil fuel prices (IRENA 2019b). The cost of electricity from PV has fallen by 89% since 21 2000 and 69% since AR5, at a rate of –16% per year. The 5:95 percentile range for PV in 2019 was 22 USD 52–190 MWh-1 (IRENA 2021b). Differences in solar insolation, financing costs, equipment 23 acquisition, installation labour, and other sources of price dispersion explain this range (Nemet et al. 24 2016; Vartiainen et al. 2020) and scale. For example, in India, rooftop installations cost 41% more than 25 utility-scale installations, and commercial-scale costs are 39% higher than utility-scale. Significant 26 differences in regional cost persist (Kazhamiaka et al. 2017; Vartiainen et al. 2020), with particularly 27 low prices in China, India, and parts of Europe. Globally, the range of global PV costs is quite similar 28 to the range of coal and natural gas prices. 29 30 Figure 6.7 Distribution of the daily mean global horizontal irradiation (GHI, kWh m-2 day-1). 31 Source: Global Solar Atlas (ESMAP 2019) 32 PV costs (Figure 6.8) have fallen for various reasons: lower silicon costs, automation, lower margins, 33 automation, higher efficiency, and a variety of incremental improvements (Fu et al. 2018; Green 2019) 34 (Chapter 16). Increasingly, the costs of PV electricity are concentrated in the installation and related 35 “soft costs” (marketing, permitting) associated with the technology rather than in the modules 36 themselves, which now account for only 30% of installed costs of rooftop systems (O’Shaughnessy et Do Not Cite, Quote or Distribute 6-23 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 al. 2019; IRENA 2021b). Financing costs are a significant barrier in developing countries (Ondraczek 2 et al. 2015) and growth there depends on access to low-cost finance (Creutzig et al. 2017). 3 CSP costs have also fallen, albeit at about half the rate of PV: –9% yr-1 since AR5. The lowest prices 4 for CSP are now competitive with more expensive fossil fuels, although the average CSP cost is above 5 the fossil range. Other data sources put recent CSP costs at USD 120 MWh-1, in the middle of the fossil 6 range (Lilliestam et al. 2020). Continuing the pace of change since AR5 will make CSP competitive 7 with fossil fuels in sunny locations, although it will be difficult for CSP to compete with PV and even 8 hybrid PV-battery systems. CSP electricity can be more valuable, however, because CSP systems can 9 store heat longer than PV battery systems. 10 11 12 Figure 6.8 Levelized costs of electricity (LCOE) of solar energy technologies 2000–2020. Range of fossil 13 fuel LCOE indicated as dashed lines USD 50–177 MWh-1. Linear fit lines were applied to data for AR4– 14 AR5 and post-AR5 (2012). Red dots are capacity-weighted global averages for utility-scale installations. 15 The blue area shows the range between the 5th and 95th percentile in each year. Data: ( IRENA 2021b). 16 The share of total costs of PV-intensive electricity systems attributed to integration costs has been 17 increasing but can be reduced by enhancing grid flexibility (Section 6.4.3, 6.6, Box 6.8) (high 18 confidence). The total costs of PV include grid integration, which varies tremendously depending on 19 PV's share of electricity, other supply sources like wind, availability of storage, transmission capacity, 20 and demand flexibility (Heptonstall and Gross 2020). Transmission costs can add USD 1–10 MWh-1 or 21 3–33% to the cost of utility-scale PV (Gorman et al. 2019). Distributed (rooftop) PV involves a broader 22 set of grid integration costs - including grid reinforcement, voltage balancing and control, and impacts 23 on other generations - and has a larger range of integration costs from USD 2–25 MWh-1, which is –3% 24 to +37% (Hirth et al. 2015; Wu et al. 2015; Gorman et al. 2019). Other meta-analyses put the range at 25 USD 1–7 MWh-1 in the USA (Luckow et al.; Wiser et al. 2017), while a comprehensive study put the 26 range at USD 12–18 MWh-1 for up to 35% renewables and USD 25–46 MWh-1 above 35% renewables 27 (Heptonstall and Gross 2020). Increased system flexibility can reduce integration costs of solar energy 28 (Wu et al. 2015) including storage, demand response, sector-coupling (Bogdanov et al. 2019; Brown et 29 al. 2018), and increase complementarity between wind and solar (Heide et al. 2010) (Sections 6.4.3 and 30 6.4.4). 31 Since solar PV panels have very low-operating costs, they can, at high penetrations and in the absence 32 of adequate incentives to shift demand, depress prices in wholesale electricity markets, making it 33 difficult to recoup investment and potentially reducing incentives for new installations (Hirth 2013; 34 Millstein et al. 2021). Continued cost reductions help address this issue of value deflation, but only 35 partially. Comprehensive solutions depend on adding transmission and storage (Das et al. 2020) and, 36 more fundamentally, adjustments to electricity market design (Bistline and Young 2019; Roques and 37 Finon 2017). Do Not Cite, Quote or Distribute 6-24 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 The most important ways to minimize PVs impact on the environment lie in recycling materials at end 2 of life and making smart land-use decisions (medium confidence). A comprehensive assessment of PVs 3 environmental impacts requires life-cycle analysis (LCA) of resource depletion, land-use, ecotoxicity, 4 eutrophication, acidification, ozone, and particulates, among other things (Mahmud et al. 2018). LCA 5 studies show that solar PVs produce far less CO2 per unit of electricity than fossil generation, but PV 6 CO2 emissions vary due to the carbon intensity of manufacturing energy and offset electricity (Grant 7 and Hicks 2020). Concerns about systemic impacts, such as reducing the Earth’s albedo by covering 8 surfaces with dark panels, have shown to be trivial compared to the mitigation benefits (Nemet 2009) 9 (Box 6.7). Even though GHG LCA estimates span a considerable range of 9–250 gCO2 kWh-1 (de Wild- 10 Scholten 2013; Kommalapati et al. 2017), recent studies that reflect higher efficiencies and 11 manufacturing improvements find lower life-cycle emissions, including a range of 18–60 gCO2 kWh-1 12 (Wetzel and Borchers 2015) and central estimates of 80 gCO2 kWh-1 (Hou et al. 2016), 50 gCO2 kWh- 1 13 (Nugent and Sovacool 2014), and 20 gCO2 kWh-1 (Louwen et al. 2016). These recent values are an 14 order of magnitude lower than coal and natural gas and further decarbonization of the energy system 15 will make them lower still. Thin films and organics produce half the life-cycle emissions of silicon 16 wafer PV, mainly because they use less material (Lizin et al. 2013; Hou et al. 2016). Novel materials 17 promise even lower environmental impacts, especially with improvements to their performance ratios 18 and reliability (Gong et al. 2015; Muteri et al. 2020). Higher efficiencies, longer lifetimes, sunny 19 locations, less carbon intensive manufacturing inputs, and shifting to thin films could reduce future life- 20 cycle impacts. 21 Another environmental concern with large PV power plants is the conversion of land to collect solar 22 energy (Hernandez et al. 2015). Approximately 2 hectares of land are needed for 1 MW of solar 23 electricity capacity (Kabir et al. 2018; Perpiña Castillo et al. 2016); at 20% efficiency, a square of PV 24 panels of 550 km by 550 km, comprising 0.2% of Earth’s land area, could meet global energy demand. 25 Land conversion can have local impacts, especially near cities and where land used for solar competes 26 with alternative uses, such as agriculture. Large installations can also adversely impact biodiversity 27 (Hernandez et al. 2014), especially where the above ground vegetation is cleared and soils are typically 28 graded. Landscape fragmentation creates barriers to the movement of species. However, a variety of 29 means have emerged to mitigate land use issues. Substitution among renewables can reduce land 30 conversion (Tröndle and Trondle 2020). Solar can be integrated with other uses through ‘agrivoltaics’ 31 (the use of land for both agriculture and solar production) (Dupraz et al. 2011) by, for example, using 32 shade-tolerant crops (Dinesh and Pearce 2016). Combining solar and agriculture can also create income 33 diversification, reduced drought stress, higher solar output due to radiative cooling, and other benefits 34 (Elamri et al. 2018; Hassanpour Adeh et al. 2018; Barron-Gafford et al. 2019). PV installations floating 35 on water also avoid land-use conflicts (Sahu et al. 2016; Lee et al. 2020), as does dual-use infrastructure, 36 such as landfills (Jäger-Waldau 2020) and reservoirs where evaporation can also be reduced (Farfan 37 and Breyer 2018). 38 Material demand for PV will likely increase substantially to limit warming to well below 2°C, but PV 39 materials are widely available, have possible substitutes, and can be recycled (medium confidence) (Box 40 6.4). The primary materials for PV are silicon, copper, glass, aluminium, and silver, the costliest being 41 silicon and glass being the most essential by mass, at 70%. None of these materials is considered to be 42 either critical or potentially scarce (IEA 2020e). Thin-film cells, such as amorphous silicon, cadmium 43 telluride and copper indium gallium diselenide (CIGS), use far less material (though they use more 44 glass), but account for less than 10% of the global solar market. Other thin-films, such as those based 45 on perovskites, organic solar cells, or earth-abundant, non-toxic materials such as kesterites, either on 46 their own, or layered on silicon, could further reduce material use per energy produced. (Box 6.4) 47 After a typical lifetime of 30 years of use, PV modules can be recycled to prevent environmental 48 contamination from the toxic materials within them, reusing valuable materials and avoiding waste Do Not Cite, Quote or Distribute 6-25 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 accumulation. Recycling allows the reuse of nearly all - 83% in one study - of the components of PV 2 modules, other than plastics (Ardente et al. 2019) and would add less than 1% to lifecycle GHG 3 emissions (Latunussa et al. 2016). Glass accounts for 70% of the mass of a solar cell and is relatively 4 easy to recycle. Recycling technology is advancing, but the scale and share of recycling is still small 5 (Li et al. 2020d). By 2050, however, end-of-life PV could total 80 MT and comprise 10% of global 6 electronic waste (Stolz and Frischknecht 2017), although most of it is glass. IEA runs a program to 7 enable PV recycling by sharing best practices to minimise recycling life cycle impacts. Ensuring that a 8 substantial amount of panels are recycled at end of life will likely require policy incentives, as the 9 market value of the recovered materials, aside from aluminium and copper, is likely to be too low to 10 justify recycling on its own (Deng et al. 2019). A near-term priority is maximizing the recovery of 11 silver, silicon, and aluminium, the most valuable PV material components (Heath et al. 2020). 12 Many alternative PV materials are improving in efficiency and stability, providing longer-term 13 pathways for continued PV costs reductions and better performance (high confidence). While solar PV 14 based on semi-conductors constructed from wafers of silicon still captures 90% of the market, new 15 designs and materials have the potential to reduce costs further, increase efficiency, reduce resource 16 use, and open new applications. The most significant technological advance within silicon PV in the 17 past ten years has been the widespread adoption of the passivated emitter and rear cell (PERC) design 18 (Green 2015), which now accounts for the majority of production. This advance boosts efficiency over 19 traditional aluminium backing by increasing reflectivity within the cell and reducing electron hole 20 recombination (Blakers 2019). Bifacial modules increase efficiency by using reflected light from the 21 ground or roof on the backside of modules (Guerrero-Lemus et al. 2016). Integrating PV into buildings 22 can reduce overall costs and improve building energy performance (Shukla et al. 2016). Concentrating 23 PV uses lenses or mirrors that collect and concentrate light onto high efficiency PV cells (Li et al. 24 2020a). Beyond crystalline silicon, thin films of amorphous silicon, cadmium telluride, and copper 25 indium gallium selenide (among others) have the potential for much lower costs while their efficiencies 26 have increased (Green et al. 2019). Perovskites, inexpensive and easy to produce crystalline structures, 27 have increased in efficiency by a factor of six in the past decade; the biggest challenge is light-induced 28 degradation as well as finding lead-free efficient compounds or establish lead recycling at the end of 29 the life cycle of the device (Petrus et al. 2017; Chang et al. 2018; Wang et al. 2019b; Zhu et al. 2020). 30 Organic solar cells are made of carbon-based semiconductors like the ones found in the displays made 31 from organic light emitting diodes (OLEDs) and can be processed in thin films on large areas with 32 scalable and fast coating processes on plastic substrates. The main challenges are raising the efficiency 33 and improving their lifetime (Ma et al. 2020; Riede et al. 2021). Quantum dots, spherical semi- 34 conductor nano-crystals, can be tuned to absorb specific wavelengths of sunlight giving them the 35 potential for high efficiency with very little material use (Kramer et al. 2015). A common challenge for 36 all emerging solar cell technologies is developing the corresponding production equipment. Hybrids of 37 silicon with layers of quantum dots and perovskites have the potential to take advantage of the benefits 38 of all three, although those designs require that these new technologies have stability and scale that 39 match those of silicon (Palmstrom et al. 2019; Chang et al. 2017). This broad array of alternatives to 40 making PV from crystalline silicon offer realistic potential for lower costs, reduced material use, and 41 higher efficiencies in future years (Victoria et al. 2021). 42 Besides PV, alternative solar technologies exist, including CSP, which can provide special services in 43 high-temperature heat and diurnal storage, even if it is more costly than PV and its potential for 44 deployment is limited. CSP uses reflective surfaces, such as parabolic mirrors, to focus sunlight on a 45 receiver to heat a working fluid, which is subsequently transformed into electricity (Islam et al. 2018). 46 Solar heating and cooling are also well established technologies, and solar energy can be utilized 47 directly for domestic or commercial applications such as drying, heating, cooling, and cooking (Ge et 48 al. 2018). Solar chimneys, still purely conceptual, heat air using large transparent greenhouse-like 49 structures and channel the warm air to turbines in tall chimneys (Kasaeian et al. 2017). Solar energy Do Not Cite, Quote or Distribute 6-26 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 can also be used to produce solar fuels, for example, hydrogen or synthetic gas (syngas) (Nocera 2017; 2 Montoya et al. 2016; Detz et al. 2018). In addition, research proceeds on space-based solar PV, which 3 takes advantage of high insolation and a continuous solar resource (Kelzenberg et al. 2018), but faces 4 the formidable obstacle of developing safe, efficient, and inexpensive microwave or laser transmission 5 to the Earth’s surface (Yang et al. 2016). CSP is the most widely adopted of these alternative solar 6 technologies. 7 Like PV, CSP facilities can deliver large amounts of power (up to 200 MW per unit) and maintain 8 substantial thermal storage, which is valuable for load balancing over the diurnal cycle (McPherson et 9 al. 2020). However, unlike PV, CSP can only use direct sunlight, constraining its cost-effectiveness to 10 North Africa, the Middle East, Southern Africa, Australia, the Western U.S., parts of South America 11 (Peru, Chile), the Western part of China, and Australia (Deng et al. 2015; Dupont et al. 2020). Parabolic 12 troughs, central towers and parabolic dishes are the three leading solar thermal technologies (Wang et 13 al. 2017d). Parabolic troughs represented approximately 70% of new capacity in 2018 with the balance 14 made up by central tower plants (Islam et al. 2018). Especially promising research directions are on 15 tower-based designs that can achieve high temperatures, useful for industrial heat and energy storage 16 (Mehos et al. 2017), and direct steam generation designs (Islam et al. 2018). Costs of CSP have fallen 17 by nearly half since AR5 (Figure 6.8) albeit at a slower rate than PV. Since AR5, almost all new CSP 18 plants have storage (Figure 6.9)(Thonig 2020). 19 20 21 Figure 6.9 CSP plants by storage capacity in hours (vertical), year of installation (horizontal), and size of 22 plant in MW (circle size). Since AR5, almost all new CSP plants have storage (Thonig 2020). Data 23 source: https://csp.guru/metadata.html. 24 Solar energy elicits favourable public responses in most countries (high confidence) (Bessette and Arvai 25 2018; Hanger et al. 2016; Jobin and Siegrist 2018; Ma et al. 2015; Mcgowan and Sauter 2005; Hazboun 26 and Boudet 2020; Roddis et al. 2019). Solar energy is perceived as clean and environmentally friendly 27 with few downsides (Faiers and Neame 2006; Whitmarsh et al. 2011b). Key motivations for 28 homeowners to adopt photovoltaic systems are expected financial gains, environmental benefits, the 29 desire to become more self-sufficient, and peer expectations (Korcaj et al. 2015; Palm 2017; Vasseur 30 and Kemp 2015). Hence, the observability of photovoltaic systems can facilitate adoption (Boudet 31 2019). The main barriers to the adoption of solar PV by households are its high upfront costs, aesthetics, 32 landlord-tenant incentives, and concerns about performance and reliability (Whitmarsh et al. 2011b; 33 Vasseur and Kemp 2015; Faiers and Neame 2006). Do Not Cite, Quote or Distribute 6-27 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 6.4.2.2 Wind Energy 2 Wind power is increasingly competitive with other forms of electricity generation and is the low-cost 3 option in many applications (high confidence). Costs have declined by 18% and 40% on land and 4 offshore since 2015 (high confidence), and further reductions can be expected by 2030 (medium 5 confidence). Critical areas for continued improvement are technology advancements and economies of 6 scale (high confidence). Global future potential is primarily limited by onshore land availability in wind 7 power-rich areas, lack of supporting infrastructure, grid integration, and access to finance (especially in 8 developing countries) (high confidence). 9 Energy from wind is abundant, and the estimated technical potentials surpass the total amount of energy 10 needed to limit warming to well below 2°C (high confidence). Recent global estimates of potentially 11 exploitable wind energy resource are in the range of 557–717 PWh yr-1 (2005–2580 EJ yr-1) (Eurek et 12 al. 2017; Bosch et al. 2017, 2018; McKenna et al. 2022), or 20–30 times the 2017 global electricity 13 demand. Studies have suggested that ‘bottom-up’ approaches may overestimate technical potentials 14 (Miller et al. 2015; Kleidon and Miller 2020). But even in the most conservative ‘top-down’ approaches, 15 the technical wind potential surpasses the amount needed to limit warming to well below 2°C (Bosch 16 et al. 2017; Eurek et al. 2017; Volker et al. 2017). The projected climate change mitigation from wind 17 energy by 2100 ranges from 0.3°C–0.8°C depending on the precise socio-economic pathway and wind 18 energy expansion scenario followed (Barthelmie and Pryor 2021). Wind resources are unevenly 19 distributed over the globe and by time of the year (Petersen and Troen 2012), but potential hotspots 20 exist on every continent (Figure 6.10) as expressed by the wind power density (a quantitative measure 21 of wind energy available at any location). Technical potentials for onshore wind power vary 22 considerably, often because of inconsistent assessments of suitability factors (McKenna et al. 2020). 23 The potential for offshore wind power is larger than for onshore because offshore wind is stronger and 24 less variable (Bosch et al. 2018). Offshore wind is more expensive, however, because of higher costs 25 for construction, maintenance, and transmission. Wind power varies at a range of time scales, from 26 annual to sub-seconds; the effects of local short-term variability can be offset by power plant control, 27 flexible grid integration, and storage (Barra et al. 2021) (section 6.4.3). In some regions, interannual 28 variations in wind energy resources could be important for optimal power system design (Wohland et 29 al. 2019a; Coker et al. 2020). 30 31 32 Figure 6.10 Mean wind power density [W m-2] at 100 m above ground level over land and within 100 km 33 of the coastline. Source: Global Wind Atlas https://globalwindatlas.info/ 34 Wind power cost reductions (Figure 6.11) are driven mainly by larger capacity turbines, larger rotor 35 diameters and taller hub heights - larger swept areas increase the energy captured and the capacity Do Not Cite, Quote or Distribute 6-28 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 factors for a given wind speed; taller towers provide access to higher wind speeds (Beiter et al. 2021). 2 All major onshore wind markets have experienced rapid growth in both rotor diameter (from 81.2 m in 3 2010 to 120 m in 2020) (IRENA 2021b), and average power ratings (from 1.9 MW in 2010 to 3 MW 4 in 2020). The generation capacity of offshore wind turbines grew by a factor of 3.7 in less than two 5 decades, from 1.6 MW in 2000 to 6 MW in 2020 (Wiser et al. 2021). Floating foundations could 6 revolutionize offshore wind power by tapping into the abundant wind potential in deeper waters. This 7 technology is particularly important for regions where coastal waters are too deep for fixed-bottom 8 wind turbines. Floating wind farms potentially offer economic and environmental benefits compared 9 with fixed-bottom designs due to less-invasive activity on the seabed during installation, but the long- 10 term ecological effects are unknown and meteorological conditions further offshore and in deeper 11 waters are harsher on wind turbine components (IRENA 2019c). A radical new class of wind energy 12 converters has also been conceived under the name of Airborne Wind Energy Systems that can harvest 13 strong, high-altitude winds (typically between 200–800m), which are inaccessible by traditional wind 14 turbines (Cherubini et al. 2015). This technology has seen development and testing of small devices 15 (Watson et al. 2019). 16 Wind capacity factors have increased over the last decade (Figure 6.11). The capacity factor for onshore 17 wind farms increased from 27% in 2010 to 36% in 2020 (IRENA 2021a). The global average offshore 18 capacity factor has decreased from a peak of 45% in 2017. This has been driven by the increased share 19 of offshore development in China, where projects are often near-shore and use smaller wind turbines 20 than in Europe (IRENA 2021b). Improvements in capacity factors also come from increased 21 functionality of wind turbines and wind farms. Manufactures can adapt the wind turbine generator to 22 the wind conditions. Turbines for windy sites have smaller generators and smaller specific capacity per 23 rotor area, and therefore operate more efficiently and reach full capacity for a longer time period (Rohrig 24 et al. 2019). 25 Electricity from onshore wind is less expensive than electricity generated from fossil fuels in a growing 26 number of markets (high confidence). The global average LCOE onshore declined by 38% from 2010 27 to 2020 (Figure 6.11), reaching USD 0.039 kWh-1. However, the decrease in cost varies substantially 28 by region. Since 2014, wind costs have declined more rapidly than the majority of experts predicted 29 (Wiser et al. 2021). New modelling projects onshore wind LCOE of USD .037 kWh-1 by 2030 30 (Junginger et al. 2020a), and additional reductions of 37–39% have been predicted by 2050 (Wiser et 31 al. 2021). The future cost of offshore wind is more uncertain because other aspects besides increases in 32 capacity factors influence the cost (Junginger et al. 2020b). Do Not Cite, Quote or Distribute 6-29 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 2 3 Figure 6.11 Global weighted average total installed costs, capacity factors, and LCOE for onshore (top) 4 and offshore (bottom) wind power of existing power plants per year (2010-2020). The shaded area 5 represents the 5th and 95th percentiles and the red dashed line represents the fossil fuel cost range. 6 Source: (IRENA 2021a) 7 The cost of the turbine (including the towers) makes up the largest component of wind’s LCOE. Total 8 installed costs for both onshore and offshore wind farms have decreased since 2015 (Figure 6.11), but 9 the total installed costs for onshore wind projects are very site- and market-specific, as reflected in the 10 range of LCOEs. China, India, and the U.S. have experienced the largest declines in total installed costs. 11 In 2020, typical country-average total installed costs were around USD 1150 kW-1 in China and India, 12 and between USD 1403–2472 kW-1 elsewhere (IRENA 2021b). Total installed costs of offshore wind 13 farms declined by 12% between 2010 and 2020. But, because some of the new offshore wind projects 14 have moved to deeper waters and further offshore, there are considerable year-to-year variations in their 15 price (IRENA 2021b). Projects outside China in recent years have typically been built in deeper waters 16 (10–55 m) and up to 120 km offshore, compared to around 10 m in 2001–2006, when distances rarely 17 exceeded 20 km. With the shift to deeper waters and sites further from ports, the total installed costs of 18 offshore wind farms rose, from an average of around USD 2500 kW-1 in 2000 to around USD 5127 kW- 1 19 by 2011–2014, before falling to around USD 3185 kW-1 in 2020 (IRENA 2020a). The full cost of 20 wind power includes the transmission and system integration costs (Sections 6.4.3, 6.4.6. A new 21 technology in development is the co-location of wind and solar PV power farms, also known as hybrid 22 power plants. Co-locating wind, solar PV, and batteries can lead to synergies in electricity generation, 23 infrastructure, and land usage, which may lower the overall plant cost compared to single technology 24 systems (Lindberg et al. 2021). 25 Wind power plants pose relatively low environmental impact, but sometimes locally significant 26 ecological effects (high confidence). The environmental impact of wind technologies, including CO2 27 emissions, is concentrated in the manufacturing, transport, and building stage and in disposal as the 28 end-of-life of wind turbines is reached (Liu and Barlow 2017; Mishnaevsky 2021). The operation of 29 wind turbines produces no waste or pollutants. The LCA for wind turbines is strongly influenced by the 30 operating lifetime, quality of wind resources, conversion efficiency, and size of the wind turbines Do Not Cite, Quote or Distribute 6-30 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 (Laurent et al. 2018; Kaldellis and Apostolou 2017). But, all wind power technologies repay their 2 carbon footprint in less than a year (Bonou et al. 2016). 3 Wind farms can cause local ecological impacts, including impacts on animal habitat and movements, 4 biological concerns, bird and bat fatalities from collisions with rotating blades, and health concerns 5 (Morrison and Sinclair 2004). The impacts on animal habitats and collisions can be resolved or reduced 6 by selectively stopping some wind turbines in high risk locations, often without affecting the 7 productivity of the wind farm (de Lucas et al. 2012). Many countries now require environmental studies 8 of impacts of wind turbines on wildlife prior to project development, and, in some regions, shutdowns 9 are required during active bird migration (de Lucas et al. 2012). Offshore wind farms can also impact 10 migratory birds and other sea species (Hooper et al. 2017). Floating foundations pose lower 11 environmental impacts at build stage (IRENA 2019c), but their cumulative long-term impacts are 12 unclear (Goodale and Milman 2016). Recent studies find weak associations between wind farm noise 13 and measures of long-term human health (Poulsen et al. 2018a,b, 2019a,b). 14 Public support for onshore and particularly offshore wind energy is generally high, although people 15 may oppose specific wind farm projects (high confidence) (e.g., Rand and Hoen 2017; Steg 2018; Bell 16 et al. 2005; Batel and Devine-Wright 2015). People generally believe that wind energy is associated 17 with environmental benefits and that it is relatively cheap. Yet, some people believe wind turbines can 18 cause noise and visual aesthetic pollution, threaten places of symbolic value (Russell et al. 2020; 19 Devine-Wright and Wiersma 2020), and have adverse effects on wildlife (Bates and Firestone 2015), 20 which challenges public acceptability (Rand and Hoen 2017). Support for local wind projects is higher 21 when people believe fair decision-making procedures have been implemented (Aitken 2010a; Dietz and 22 Stern 2008). Evidence is mixed whether distance from wind turbines or financial compensation 23 increases public acceptability of wind turbines (Hoen et al. 2019; Rand and Hoen 2017; Cass et al. 24 2010; Rudolph et al. 2018). Offshore wind farms projects have higher public support, but can also face 25 resistance (Rudolph et al. 2018; Bidwell 2017). 26 Common economic barriers to wind development are high initial cost of capital, long payback periods, 27 and inadequate access to capital. Optimal wind energy expansion is most likely to occur in the presence 28 of a political commitment to establish, maintain, and improve financial support instruments, 29 technological efforts to support a local supply chains, and grid investments integrate VRE electricity 30 (Diógenes et al. 2020). 31 [START BOX 6.4 HERE] 32 Box 6.4 Critical strategic minerals and a low-carbon energy system transition 33 The secure supply of many metals and minerals (e.g., cobalt, copper, lithium, and rare earth elements, 34 REEs) is critical to supporting a low-emissions energy system transition (Sovacool et al. 2020). A low- 35 carbon energy system transition will increase the demand for these minerals to be used in technologies 36 like wind turbines, PV cells, and batteries (World Bank 2020). Reliance on these minerals has raised 37 questions about possible constraints to a low-carbon energy system transition, including supply chain 38 disruptions (Chapter 10.6). Concerns have also been raised about mining for these materials, which 39 frequently results in severe environmental impacts (Sonter et al. 2020), and metal production itself is 40 energy-intensive and difficult to decarbonize (Sovacool et al. 2020). 41 Wind energy depends on two critical REEs - neodymium and dysprosium - used in magnets in high- 42 performance generators (Pavel et al. 2017; Li et al. 2020b). Silicon-wafer-based solar PV, which 43 accounted for 95% of PV production in 2020, does not use REEs but utilizes aluminium, copper, and 44 silver (IEA 2021a). Lithium, nickel, cobalt, and phosphorous are used in batteries. Many critical 45 minerals are used in EVs, including aluminium and copper in manufacturing the necessary EV charging 46 infrastructure, and neodymium in permanent magnet motors. Do Not Cite, Quote or Distribute 6-31 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 These strategic minerals are found in a limited number of countries, and concerns have been raised that 2 geopolitical factors could disrupt the supply chain necessary for a low-carbon energy system transition. 3 However, excluding cobalt and lithium, no single country holds more than a third of the world reserves. 4 The known supply of some strategic minerals is still close to 600 years at current levels of demand (BP 5 2020), but increased demand would cut more quickly into supplies. 6 There are alternatives to the strategic minerals currently used to support a low-carbon transition. Wind 7 turbines can be manufactured without permanent magnets to reduce the need for strategic minerals, but 8 the production costs are higher, and their efficiency is reduced (Månberger and Stenqvist 2018). 9 Alternatives to silicon, such as thin films, could be used to produce PVs. Thin-films use much less 10 material than silicon-based PV, but they contain other potentially critical metals like tellurium, 11 cadmium, and gallium. Alternatives to lithium-ion batteries, such as sodium-ion batteries, are becoming 12 more practical and feasible (Sovacool et al. 2020). 13 [END BOX 6.4HERE] 14 6.4.2.3 Hydroelectric Power 15 Hydropower is technically mature, proved worldwide as a primary source of renewable electricity, and 16 may be used to balance electricity supply by providing flexibility and storage. The LCOE of 17 hydropower is lower than the cheapest new fossil fuel-fired option. However, the future mitigation 18 potential of hydropower depends on minimizing environmental and social impacts during the planning 19 stages, reducing the risks of dam failures, and modernising the aging hydropower fleet to increase 20 generation capacity and flexibility (high confidence). 21 Estimates of global gross theoretical available hydropower potential varies from 31–128 PWh yr-1 (112– 22 460 EJ yr-1), exceeding total electricity production in 2018 (Banerjee et al. 2017; IEA 2021d; BP 2020). 23 This potential is distributed over 11.8 million locations (Figure 6.12), but many of the locations cannot 24 be developed for (current) technical, economic, or political reasons. The estimated technical potential 25 of hydropower is 8–30 PWh yr-1 (29–108 EJ yr-1), and its estimated economic potential is 8–15 PWh 26 yr-1 (29–54 EJ yr-1) (van Vliet et al. 2016c; Zhou et al. 2015). Actual hydropower generation in 2019 27 was 4.2 PWh (15.3 EJ), providing about 16% of global electricity and 43% of global electricity from 28 renewables (BP 2020; Killingtveit 2020; IEA 2020f). Asia holds the largest hydropower potential 29 (48%), followed by S. America (19%) (Hoes et al. 2017). 30 31 Figure 6.12 Global map of gross hydropower potential distribution [GWh yr -1], Data: (Hoes et al. 2017) 32 Hydropower is a mature technology with locally adapted solutions (high confidence) (Zhou et al. 2015; 33 Killingtveit 2020). The peak efficiency of hydroelectric plants is greater than 85%. Hydropower plants 34 without storage or with small storage typically produce a few kWs to 10 MWs (examples of such plants 35 producing higher amounts do exist), and are useful for providing electricity at a scale from households Do Not Cite, Quote or Distribute 6-32 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 to small communities (El Bassam et al. 2013; Towler 2014). However, hydropower plants without or 2 with small storage may be susceptible to climate variability, especially droughts, when the amount of 3 water may not be sufficient to generate electricity (see Section 6.5, Premalatha et al. 2014). 4 Hydropower plants with storage may produce 10 GW, reaching over 100 TWh yr -1 (0.36 EJ yr-1), but 5 generally require large areas. Pumped storage hydropower stores energy by pumping water to higher 6 reservoirs during low-demand periods (Killingtveit 2020). The storage in hydropower systems provides 7 flexibility to compensate for rapid variations in electricity loads and supplies. The regulating 8 characteristics of the storage play an important role in assuring continuity of energy supply from 9 renewable sources (Yang et al. 2018b). 10 Hydropower is one of the lowest-cost electricity technologies (Mukheibir 2013; IRENA 2021b). Its 11 operation and maintenance costs are typically 2–2.5% of the investment costs per kW yr-1 for a lifetime 12 of 40–80 years (Killingtveit 2020). Construction costs are site specific. The total cost for an installed 13 large hydropower project varies from USD 10,600–804,500 kW-1 if the site is located far away from 14 transmission lines, roads, and infrastructure. Investment costs increase for small hydropower plants and 15 may be as high as USD 100,000 kW-1 or more for the installation of plants of less than 1 MW - 20% to 16 80% more than for large hydropower plants (IRENA 2015). During the past 100 years, total installed 17 costs and LCOE have risen by a few percent, but the LCOE of hydropower remains lower than the 18 cheapest new fossil fuel-fired option (IRENA 2019b, 2021). 19 Hydroelectric power plants may pose serious environmental and societal impacts (high confidence) 20 (Mccartney 2009). Dams may lead to fragmentation of ecological habitats because they act as barriers 21 for migration of fish and other land and water-borne fauna, sediments, and water flow. These barriers 22 can be mitigated by sediment passes and fish migration aids, and with provision of environmental flows. 23 Below dams, there can be considerable alterations to vegetation, natural river flows, retention of 24 sediments and nutrients, and water quality and temperature. Construction of large reservoirs leads to 25 loss of land, which may result in social and environmental consequences. Minimizing societal and 26 environmental impacts requires taking into account local physical, environmental, climatological, 27 social, economic, and political aspects during the planning stage (Killingtveit 2020). Moreover, when 28 large areas of land are flooded by dam construction, they generate GHGs (Phyoe and Wang 2019; 29 Maavara et al. 2020; Prairie et al. 2018). On the other hand, hydropower provides flexible, competitive 30 low-emission electricity, local economic benefits (e.g., by increasing irrigation and electricity 31 production in developing countries), and ancillary services such as municipal water supply, irrigation 32 and drought management, navigation and recreation, and flood control (IRENA 2021b). However, the 33 long term economic benefits to communities affected by reservoirs are a subject of debate (de Faria et 34 al. 2017; Catolico et al. 2021). 35 Public support for hydroelectric energy is generally high (Steg 2018), and higher than support for coal, 36 gas, and nuclear. Yet, public support for hydro seems to differ for existing and new projects (high 37 confidence). Public support is generally high for small and medium scale hydropower in regions where 38 hydropower was historically used (Gormally et al. 2014). Additionally, there is high support for existing 39 large hydropower projects in Switzerland (Plum et al. 2019; Rudolf et al. 2014), Canada (Boyd et al. 40 2019), and Norway (Karlstrøm and Ryghaug 2014), where it is a trusted and common energy source. 41 Public support seems lower for new hydropower projects (Hazboun and Boudet 2020), and the 42 construction of new large hydropower plants has been met with strong resistance in some areas 43 (Bronfman et al., 2015; Vince, 2010). People generally perceive hydroelectric energy as clean and a 44 non-contributor to climate change and environmental pollution (Kaldellis et al. 2013). For example, in 45 Sweden, people believed that existing hydropower projects have as few negative environmental impacts 46 as solar, and even less than wind (Ek 2005). However, in areas where the construction of new large- 47 scale hydroelectric energy is met with resistance, people believe that electricity generation from hydro 48 can cause environmental, social, and personal risks (Bronfman et al., 2012; Kaldellis et al., 2013). Do Not Cite, Quote or Distribute 6-33 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 The construction time of hydroelectric power plants is longer than many other renewable technologies, 2 and that construction time may be extended by the additional time it takes to fill the reservoir. This 3 extended timeline can create uncertainty in the completion of the project. The uncertainty is due to 4 insecurity in year-to-year variations in precipitation and the water inflows required to fill reservoirs. 5 This is especially critical in the case of trans-boundary hydroelectric power plants, where filling up the 6 reservoirs can have large implications on downstream users in other nations. As a result of social and 7 environmental constraints, only a small fraction of potential economic hydropower projects can be 8 developed, especially in developed countries. Many developing countries have major undeveloped 9 hydropower potential, and there are opportunities to develop hydropower combined with other 10 economic activities such as irrigation (Lacombe et al. 2014). Competition for hydropower across 11 country borders can lead to conflict, which could be exacerbated if climate alters rainfall and streamflow 12 (Ito et al. 2016). 13 6.4.2.4 Nuclear Energy 14 Nuclear power can deliver low-carbon energy at scale (high confidence). Doing so will require 15 improvements in managing construction of reactor designs that hold the promise of lower costs and 16 broader use (medium confidence). At the same time, nuclear power continues to be affected by cost 17 overruns, high up-front investment needs, challenges with final disposal of radioactive waste, and 18 varying public acceptance and political support levels (high confidence). 19 There are sufficient resources for substantially increasing nuclear deployment (medium confidence). 20 Estimates for identified uranium resources have been increasing steadily over the years. Conventional 21 uranium resources have been estimated to be sufficient for over 130 years of supply at current levels of 22 use; 100 years were estimated in 2009 (Hahn 1983; NEA/IAEA 2021). In the case of future uranium 23 resource scarcity, thorium or recycling of spent fuel might be used as alternatives. Interest in these 24 alternatives has waned with better understanding of uranium deposits, their availability, and low prices 25 (OECD NEA 2015; IAEA 2005). 26 There are several possible nuclear technology options for the period from 2030 to 2050 (medium 27 confidence). In addition to electricity, nuclear can also be used to produce low-carbon hydrogen and 28 freshwater (Kayfeci et al. 2019; Kavvadias and Khamis 2014) 29 • Large reactors. The nuclear industry has entered a new phase of reactor construction, based on 30 evolutionary designs. These reactors achieve improvements over previous designs through small to 31 moderate modifications, including improved redundancy, increased application of passive safety 32 features, and significant improvements to containment design to reduce the risk of a major accident 33 (MIT 2018). Examples include European - EPR, Korean - APR1400, U.S. - AP1000, Chinese - 34 HPR1000 or Russian - VVER-1200. 35 • Long-term operation (LTO) of the current fleet. Continued production from nuclear power will 36 depend in part on life extensions of the existing fleet. By the end of 2020, two-thirds of nuclear 37 power reactors will have been operational for over 30 years. The design lifetime of most of existing 38 reactors is 30–40 years. Engineering assessments have established that reactors can operate safely 39 for longer if key replaceable components (e.g., steam generator, mechanical and electrical 40 equipment, instrumentation and control parts) are changed or refurbished (IAEA 2018). The first 41 lifetime extension considered in most of the countries typically is 10–20 years (OECD IEA NEA 42 2020). 43 • Small Modular Reactors. There are more than 70 SMR designs at different stages of consideration 44 and development, from the conceptual phase to licensing and construction of first-of-a-kind 45 facilities (IAEA 2020). Due to smaller unit sizes, the SMRs are expected to have lower total 46 investment costs, although the cost per unit of generation might be higher than conventional large 47 reactors (Mignacca and Locatelli 2020). Modularity and off-site pre-production may allow greater 48 efficiency in construction, shorter delivery times, and overall cost optimization (IEA 2019c). SMR Do Not Cite, Quote or Distribute 6-34 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 designs aim to offer an increased load-following capability that makes them suitable to operate in 2 smaller systems and in systems with increasing shares of VRE sources. Their market development 3 by the early 2030s will strongly depend on the successful deployment of prototypes during the 4 2020s. 5 Nuclear power costs vary substantially across countries (high confidence). First-of-a-kind projects 6 under construction in Northern America and Europe have been marked by delays and costs overruns 7 (Berthelemy and Rangel 2015). Construction times have exceeded 13–15 years and cost has surpassed 8 3–4 times initial budget estimates (OECD IEA NEA 2020). In contrast, most of the recent projects in 9 Eastern Asia (with construction starts from 2012) were implemented within 5–6 years (IAEA PRIS 10 2021). In addition to region-specific factors, future nuclear costs will depend on the ability to benefit 11 from the accumulated experience in controlling the main drivers of cost. These cost drivers fall into 12 four categories: design maturity, project management, regulatory stability and predictability, and multi- 13 unit and series effects (NEA 2020). With lessons learned from first-of-a-kind projects, the cost of 14 electricity for new builds are expected to be in the range of USD 42–102 MWh-1 depending on the 15 region (OECD IEA NEA 2020). 16 Lifetime extensions are significantly cheaper than new builds and cost competitive with other low- 17 carbon technologies. The overnight cost of lifetime extensions is estimated in the range of USD 390– 18 630 kWe-1 for Europe and North America, and the LCOE in the range of USD 30–36 MWh-1 for 19 extensions of 10–20 years (OECD IEA NEA 2020). 20 Cost-cutting opportunities, such as design standardization and innovations in construction approaches, 21 are expected to make SMRs competitive against large reactors by 2040 (Rubio and Tricot 2016) 22 (medium confidence). As SMRs are under development, there is substantial uncertainty regarding the 23 construction costs. Vendors have estimated first-of-a-kind LCOEs at USD 131–190 MWh-1. Effects of 24 learning for nth-of-a-kind SMR are anticipated to reduce the first-of-a-kind LCOE by 19–32%. 25 Despite low probabilities, the potential for major nuclear accidents exists, and the radiation exposure 26 impacts could be large and long-lasting (Steinhauser et al. 2014). However, new reactor designs with 27 passive and enhanced safety systems reduce the risk of such accidents significantly (high confidence). 28 The (normal) activity of a nuclear reactor results in low volumes of radioactive waste, which requires 29 strictly controlled and regulated disposal. On a global scale, roughly 421 ktons of spent nuclear fuel 30 have been produced since 1971 (IEA 2014). Out of this volume, 2–3% is high-level radioactive waste, 31 which presents challenges in terms of radiotoxicity and decay longevity, and ultimately entails 32 permanent disposal. 33 Nuclear energy is found to be favourable regarding land occupation (Cheng and Hammond 2017; 34 Luderer et al. 2019) and ecological impacts (Brook and Bradshaw 2015; Gibon et al. 2017). Similarly, 35 bulk material requirements per unit of energy produced are low (e.g. aluminum, copper, iron, rare earth 36 metals) (Vidal et al. 2013; Luderer et al. 2019). Water-intensive inland nuclear power plants may 37 contribute to localized water stress and competition for water uses. The choice of cooling systems 38 (closed-loop instead of once-through) can significantly moderate withdrawal rates of the freshwater (Jin 39 et al. 2019; Fricko et al. 2016; Mouratiadou et al. 2016; Meldrum et al. 2013). Reactors situated on the 40 seashore are not affected by water scarcity issues (JRC EU 2021). Life cycle assessment (LCA) studies 41 suggest that the overall impacts on human health (in terms of disability adjusted life years (DALYs) 42 from the normal operation of nuclear power plants are substantially lower than those caused by fossil 43 fuel technologies and are comparable to renewable energy sources (Treyer et al. 2014; Gibon et al. 44 2017). 45 Nuclear power continues to suffer from limited public and political support in some countries (high 46 confidence). Public support for nuclear energy is consistently lower than for renewable energy and 47 natural gas, and in many countries as low as support for energy from coal and oil (Hobman and Do Not Cite, Quote or Distribute 6-35 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 Ashworth 2013; Corner et al. 2011; Pampel 2011). The major nuclear accidents (i.e. Three Mile Island, 2 Chernobyl, and Fukushima) decreased public support (Poortinga et al. 2013; Bird et al. 2014). The 3 public remains concerned about the safety risks of nuclear power plants and radioactive materials 4 (Tsujikawa et al. 2016; Bird et al. 2014; Pampel 2011). At the same time, some groups see nuclear 5 energy as a reliable energy source, beneficial for the economy and helpful in climate change mitigation. 6 Public support for nuclear energy is higher when people are concerned about energy security, including 7 concerns about the availability of energy and high energy prices (Gupta et al. 2019b; Groot et al. 2013), 8 and when they expect local benefit (Wang et al. 2020c). Public support also increases when trust in 9 managing bodies is higher (de Groot and Steg 2011). Similarly, transparent and participative decision- 10 making processes enhance perceived procedural fairness and public support (Sjoberg 2004). 11 Because of the sheer scale of the investment required (individual projects can exceed USD 10 billion in 12 value), nearly 90% of nuclear power plants under construction are run by state-owned or controlled 13 companies with governments assuming significant part of the risks and costs. For countries that choose 14 nuclear power in their energy portfolio, stable political conditions and support, clear regulatory regimes, 15 and adequate financial framework are crucial for successful and efficient implementation. 16 Many countries have adopted technology-specific policies for low-carbon energy courses, and these 17 policies influence the competitiveness of nuclear power. For example, feed-in-tariffs and feed-in 18 premiums for renewables widely applied in the EU (Kitzing et al. 2012) or renewable portfolio 19 standards in the U.S. (Barbose et al. 2016) impact wholesale electricity price (leading occasionally to 20 low or even negative prices), which affects the revenues of existing nuclear and other plants (Bruninx 21 et al. 2013; Newbery et al. 2018; Lesser 2019). 22 Nuclear power’s long-term viability may hinge on demonstrating to the public and investors that there 23 is a long-term solution to spent nuclear fuel. Evidence from countries steadily progressing towards first 24 final disposals - Finland, Sweden and France - suggests that broad political support, coherent nuclear 25 waste policies, and a well-managed, consensus-based decision-making process are critical for 26 accelerating this process (Metlay 2016). Proliferation concerns surrounding nuclear power are related 27 to fuel cycle (i.e., uranium enrichment and spent fuel processing). These processes are implemented in 28 a very limited number of countries following strict national and internationals norms and rules, such as 29 IAEA guidelines, treaties, and conventions. Most of the countries which might introduce nuclear power 30 in the future for their climate change mitigation benefits do not envision developing their own full fuel 31 cycle, significantly reducing any risks that might be linked to proliferation (IAEA 2014, 2019). 32 6.4.2.5 Carbon Dioxide Capture, Utilization, and Storage 33 Since AR5, there have been increased efforts to develop novel platforms that reduce the energy penalty 34 associated with CO2 capture, develop CO2 utilization pathways as a substitute to geologic storage, and 35 establish global policies to support CCS (high confidence). CCS can be used within electricity and other 36 sectors. While it increases the costs of electricity, CCS has the potential to contribute significantly to 37 low-carbon energy system transitions (IPCC 2018). 38 The theoretical global geologic storage potential is about 10,000 Gt-CO2, with more than 80% of this 39 capacity existing in saline aquifers (medium confidence). Not all the storage capacity is usable because 40 geologic and engineering factors limit the actual storage capacity to an order of magnitude below the 41 theoretical potential, which is still more than the CO2 storage requirement through 2100 to limit 42 temperature change to 1.5C (Martin-Roberts et al. 2021) (high confidence). One of the key limiting 43 factors associated with geologic CO2 storage is the global distribution of storage capacity (Table 6.2). 44 Most of the available storage capacity exists in saline aquifers. Capacity in oil and gas reservoirs and 45 coalbed methane fields is limited. Storage potential in the U.S. alone is >1,000 Gt-CO2, which is more 46 than 10% of the world total (NETL 2015). The Middle East has more than 50% of global enhanced oil 47 recovery potential (Selosse and Ricci 2017). It is likely that oil and gas reservoirs will be developed Do Not Cite, Quote or Distribute 6-36 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 before saline aquifers because of existing infrastructure and extensive subsurface data (Alcalde et al. 2 2019; Hastings and Smith 2020). Notably, not all geologic storage is utilizable. In places with limited 3 geologic storage, international CCS chains are being considered, where sources and sinks of CO2 are 4 located in two or more countries (Sharma and Xu 2021). For economic long-term storage, the desirable 5 conditions are a depth of 800-3000 m, thickness of greater than 50 m and permeability greater than 500 6 mD (Singh et al. 2020; Chadwick et al. 2008). Even in reservoirs with large storage potential, the rate 7 of injection might be limited by the subsurface pressure of the reservoir (Baik et al. 2018a). It is 8 estimated that geologic sequestration is safe with overall leakage rates at <0.001% yr -1 (Alcalde et al. 9 2018). In many cases, geological storage resources are not located close to CO2 sources, increasing 10 costs and reduces viability (Garg et al. 2017a). 11 Table 6.2 Geologic storage potential across underground formations globally. These represent order-of- 12 magnitude estimates. Data: (Selosse and Ricci 2017) Reservoir Type Africa Australia Canada China CSA EEU FSU India MEA Mexico ODA USA WEU Enhanced Oil 3 0 3 1 8 2 15 0 38 0 1 8 0 Recovery Depleted oil and gas 20 8 19 1 33 2 191 0 252 22 47 32 37 fields Enhanced Coalbed 8 30 16 16 0 2 26 8 0 0 24 90 12 Methane Recovery Deep saline aquifers 1000 500 667 500 1000 250 1000 500 500 250 1015 1000 250 13 CSA: Central and South America, EEU: Eastern Europe, FSU: Former Soviet Union, MEA: Middle East, ODA: 14 Other Asia (except China and India), WEU: Western Europe. 15 CO2 utilization (CCU) - instead of geologic storage - could present an alternative method of 16 decarbonization (high confidence). The global CO2 utilization potential, however, is currently limited 17 to 1–2 GtCO2 yr-1 for use of CO2 as a feedstock (Hepburn et al. 2019; Kätelhön et al. 2019) but could 18 increase to 20 GtCO2 by the mid-century (medium confidence). CCU involves using CO2 as a feedstock 19 to synthesize products of economic value and as substitute to fossil feedstock. However, several CO 2 20 utilization avenues might be limited by energy availability. Depending on the utilization pathway, the 21 CO2 may be considered sequestered for centuries (e.g., cement curing, aggregates), decades (plastics), 22 or only a few days or months (e.g. fuels) (Hepburn et al. 2019). Moreover, when carbon-rich fuel end- 23 products are combusted, CO2 is emitted back into the atmosphere. Because of presence of several 24 industrial clusters (regions with high density of industrial infrastructure) globally, a number of regions 25 demonstrate locations where CO2 utilization potential could be matched with large point sources of CO2 26 (Wei et al. 2020). 27 The technological development for several CO2 utilization pathways is still in the laboratory, prototype, 28 and pilot phases, while others have been fully commercialized (such as urea manufacturing). 29 Technology development in some end-uses is limited by purity requirements for CO2 as a feedstock. 30 The efficacy of CCU processes depends on additional technological constraints such as CO2 purity and 31 pressure requirements. For instance, urea production requires CO2 pressurized to 122 bar and purified 32 to 99.9%. While most utilization pathways require purity levels of 95-99%, algae production may be 33 carried out with atmospheric CO2 (Ho et al. 2019; Voldsund et al. 2016). 34 Existing post-combustion approaches relying on absorption are technologically ready for full-scale 35 deployment (high confidence). More novel approaches using membranes and chemical looping that 36 might reduce the energy penalty associated with absorption are in different stages of development - 37 ranging from laboratory phase to prototype phase (Abanades et al. 2015) (high confidence). There has 38 been significant progress in post-combustion capture technologies that used absorption in solvents such 39 as monoethanol amine (MEA). There are commercial-scale application of solvent-based absorption at 40 two facilities – Boundary Dam since 2015 and Petra Nova (temporarily suspended) since 2017, with 41 capacities of 1 and 1.6 MtCO2 yr-1 respectively (Mantripragada et al. 2019; Giannaris et al. 2020a). Do Not Cite, Quote or Distribute 6-37 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 Several 2nd and 3rd generation capture technologies are being developed with the aim of not just lowering 2 costs but also enhancing other performance characteristics such as improved ramp-up and lower water 3 consumption. These include processes such as chemical looping, which also has the advantage of being 4 capable of co-firing with biomass (Bhave et al. 2017; Yang et al. 2019). Another important 5 technological development is the Allam cycle, which utilizes CO2 as a working fluid and operates based 6 on oxy-combustion capture. Applications using the Allam Cycle can deliver net energy efficiency 7 greater than 50% and 100% CO2 capture, but they are quite sensitive to oxygen and CO2 purity needs 8 (Scaccabarozzi et al. 2016; Ferrari et al. 2017). 9 CO2 capture costs present a key challenge, remaining higher than USD 50 tCO2-1 for most technologies 10 and regions; novel technologies could help reduce some costs (high confidence). The capital cost of a 11 coal or gas electricity generation facility with CCS is almost double one without CCS (Zhai and Rubin 12 2016; Rubin et al. 2015; Bui et al. 2018). Additionally, the energy penalty increases the fuel requirement 13 for electricity generation by 13–44%, leading to further cost increases (Table 6.3). 14 Table 6.3 Costs and efficiency parameters of CCS in electric power plants. Data: (Muratori et al. 2017a) Capital Efficiency CO2 Capture CO2 Avoided Cost Cost [USD [%] Cost [USD ton- [USD ton-CO2-1] kW-1] CO2-1] Coal (steam plant) + CCS 5800 28% 63 88 Coal (IGCC) + CCS 6600 32% 61 106 Natural Gas (CC) + CCS 2100 42% 91 33 Oil (CC) + CCS 2600 39% 105 95 Biomass (steam plant) + CCS 7700 18% 72 244 Biomass (IGCC) + CCS 8850 25% 66 242 15 16 In addition to reductions in capture costs, other approaches to reduce CCS costs rely on utilizing the 17 revenues from co-products such as oil, gas, or methanol, and on clustering of large-point sources to 18 reduce infrastructure costs. The potential for such reductions is limited in several regions due to low 19 sink availability, but it could jumpstart initial investments (medium confidence). Injecting CO2 into 20 hydrocarbon formations for enhanced oil or gas recovery can produce revenues and lower costs 21 (Edwards and Celia 2018). While enhanced oil recovery potential is <5% of the actual CCS needs, they 22 can enable early pilot and demonstration projects (Núñez-López and Moskal 2019; Núñez-López et al. 23 2019). Substantial portions of CO2 are effectively stored during enhanced oil recovery (Sminchak et al. 24 2020; Menefee and Ellis 2020). By clustering together of several CO2 sources, overall costs may be 25 reduced by USD 10 tCO2-1 (Abotalib et al. 2016; Garg et al. 2017a), but geographical circumstances 26 determine the prospects of these cost reductions via economies-of-scale. The major pathways for 27 methanol, methane, liquid fuel production, and cement curing have costs greater than USD 500 tCO2-1 28 (Hepburn et al. 2019). The success of these pathways therefore depends on the value of such fuels and 29 on the values of other alternatives. 30 The public is largely unfamiliar with carbon capture, utilization, and storage technologies (Tcvetkov et 31 al. 2019; L’Orange Seigo et al. 2014) (high confidence), and many people may not have formed stable 32 attitudes and risk perceptions regarding these technologies (Daamen et al. 2006; Jones et al. 2015; Van 33 Heek et al. 2017) (medium confidence). In general, low support has been reported for CCS technologies 34 (Allen and Chatterton 2013; Demski et al. 2017). When presented with neutral information on CCS, 35 people favour other mitigation options such as renewable energy and energy efficiency (de Best- 36 Waldhober et al. 2009; Scheer et al. 2013; Karlstrøm and Ryghaug 2014). Although few totally reject 37 CCS, specific CCS projects have faced strong local resistance, which has contributed to the cancellation 38 of CCS projects (Terwel et al. 2012; L’Orange Seigo et al. 2014). Communities may also consider CCU 39 to be lower-risk and view it more favourably than CCS (Arning et al. 2019). Do Not Cite, Quote or Distribute 6-38 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 CCS requires considerable increases in some resources and chemicals, most notably water. Power plants 2 with CCS could shutdown periodically due to water scarcity. In several cases, water withdrawals for 3 CCS are 25–200% higher than plants without CCS (Yang et al. 2020; Rosa et al. 2020b) due to energy 4 penalty and cooling duty. The increase is slightly lower for non-absorption technologies. In regions 5 prone to water scarcity such as the Southwestern U.S. or Southeast Asia, this may limit deployment and 6 result in power plant shutdowns during summer months (Liu et al. 2019b; Wang et al. 2019c). The water 7 use could be managed by changing heat integration strategies and implementing reuse of wastewater 8 (Magneschi et al. 2017; Giannaris et al. 2020b). 9 10 Figure 6.13 Costs and potential for different CO2 utilization pathways (Hepburn et al. 2019) 11 Because CCS always adds cost, policy instruments are required for it to be widely deployed (high 12 confidence). Relevant policy instruments include financial instruments such as emission certification 13 and trading, legally enforced emission restraints, and carbon pricing (Haszeldine 2016; Kang et al. 14 2020). There are some recent examples of policy instruments specifically focused on promoting CCS. 15 The recent U.S. 45Q tax credits offers nationwide tax credits for CO2 capture projects above USD 35– 16 50 tCO2-1 which offset CO2 capture costs at some efficient plants (Esposito et al. 2019). Similarly, 17 California’s low-carbon fuel standard offers benefits for CO2 capture at some industrial facilities such 18 as biorefineries and refineries (Von Wald et al. 2020). 19 6.4.2.6 Bioenergy 20 Bioenergy has the potential to be a high-value and large-scale mitigation option to support many 21 different parts of the energy system. Bioenergy could be particularly valuable for sectors with limited 22 alternatives to fossil fuels (e.g., aviation, heavy industry), production of chemicals and products, and, 23 potentially, in carbon dioxide removal (CDR) via BECCS or biochar. While traditional biomass and 24 first-generation biofuels are widely used today, the technology for large-scale production from 25 advanced processes is not competitive, and growing dedicated bioenergy crops raises a broad set of 26 sustainability concerns. Its long-term role in low-carbon energy systems is therefore uncertain (high 27 confidence). [Note that this section focuses on the key technological developments for deployment of 28 commercial bioenergy.] 29 Bioenergy is versatile: technology pathways exist to produce multiple energy carriers from biomass - 30 electricity, liquid fuels, gaseous fuels, hydrogen, and solid fuels - as well as other value-added products 31 (high confidence). Different chemical and biological conversion pathways exist to convert diverse 32 biomass feedstocks into multiple final energy carriers (Figure 6.14). Currently, biomass is mostly used 33 to produce heat or for cooking purposes (traditional biomass), electricity, or first-generation sugar-based Do Not Cite, Quote or Distribute 6-39 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 biofuels (e.g., ethanol produced via fermentation), as well as biodiesel produced from vegetable oils 2 and animal fats. Electricity generated from biomass contributes about 3% of global generation. Tens of 3 billions of gallons of first-generation biofuels are produced per year. The processing requirements 4 (drying, dewatering, pelletizing) of different feedstocks for producing electricity from biomass are 5 energy-intensive, and when utilizing current power plants, the efficiency is around 22%, with an 6 increase up to 28% with advanced technologies (Zhang et al. 2020). 7 Scaling up bioenergy use will require advanced technologies such as gasification, Fischer-Tropsch 8 processing, hydrothermal liquefaction (HTL), and pyrolysis. These pathways could deliver several final 9 energy carriers starting from multiple feedstocks, including forest biomass, dedicated cellulosic 10 feedstocks, crop residues, and wastes (Figure 6.14). While potentially cost-competitive in the future, 11 pyrolysis, Fischer-Tropsch, and HTL are not currently cost-competitive (IEA 2018c; Molino et al. 2018; 12 Prussi et al. 2019), and scaling-up these processes will require robust business strategies and optimized 13 use of co-products (Lee and Lavoie 2013). Advanced biofuels production processes are at the pilot or 14 demonstration stage and will require substantial breakthroughs or market changes to become 15 competitive. Moreover, fuels produced from these processes require upgrading to reach “drop-in” 16 conditions – that is, conditions in which they may be used directly consistent with current standards in 17 existing technologies (van Dyk et al. 2019). Additional opportunities exist to co-optimize second 18 generation biofuels and engines (Ostadi et al. 2019; Salman et al. 2020). In addition, gaseous wastes, 19 or high-moisture biomass, such as dairy manure, wastewater sludge and organic MSW could be utilized 20 to produce renewable natural gas. Technologies for producing biogas (e.g. digestion) tend to be less 21 efficient than thermochemical approaches and often produce large amounts of CO2, requiring the 22 produced fuels to undergo significant upgrading (Melara et al. 2020). 23 24 Figure 6.14 Range of advanced bioenergy conversion pathways (excluding traditional biomass, direct heat 25 generation, first-generation biofuels, and non-energy products) based on feedstock, targeted end product, 26 and compatibility with CDR via CCS and soil carbon sequestration (Modified from Baker et al, 2020) 27 A major scale-up of bioenergy production will require dedicated production of advanced biofuels. First 28 generation biofuels produced directly from food crops or animal fats both have limited potential and 29 lower yield per land area than advanced biofuels. Wastes and residues (e.g., from agricultural, forestry, 30 animal manure processing) or biomass grown on degraded, surplus, and marginal land can provide 31 opportunities for cost-effective and sustainable bioenergy at significant but limited scale (Saha and 32 Eckelman 2018; Fajardy and Mac Dowell 2020; Spagnolo et al. 2020; Morris et al. 2013). Assessing 33 the potential for a major scale-up of purpose-grown bioenergy is challenging due to its far-reaching 34 linkages to issues beyond the energy sector, including competition with land for food production and 35 forestry, water use, impacts on ecosystems, and land-use change) (IPCC 2020; Chapter 12; (Roe et al. 36 2021)). These factors, rather than geophysical characteristics, largely define the potential for bioenergy Do Not Cite, Quote or Distribute 6-40 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 and explain the difference in estimates of potential in the literature. Biomass resources are not always 2 in close proximity to energy demand, necessitating additional infrastructure or means to transport 3 biomass or final bioenergy over larger distances and incur additional energy use (Baik et al. 2018b; 4 Singh et al. 2020). 5 An important feature of bioenergy is that it can be used to remove carbon from the atmosphere by 6 capturing CO2 in different parts of the conversion process and then permanently storing the CO2 7 (BECCS or biochar) (Chapter 3, Chapter 7; Chapter 12.5; Smith et al. 2016; Fuss et al. 2018). Some 8 early opportunities for low-cost BECCS are being utilized in the ethanol sector but these are applicable 9 only in the near-term at the scale of ≤100 Mt-CO2 yr-1 (Sanchez et al. 2018). Several technological and 10 institutional barriers exist for large-scale BECCS implementation, including large energy requirements 11 for CCS, limit and cost of biomass supply and geologic sinks for CO2 in several regions, and cost of 12 CO2 capture technologies (high confidence). Besides BECCS, biofuels production through pyrolysis 13 and hydrothermal liquefaction creates biochar, which could also be used to store carbon as 80% of the 14 carbon sequestered in biochar will remain in the biochar permanently (Chapter 7). In addition to its 15 ability to sequester carbon, biochar can be used as a soil amendment (Wang et al. 2014b). 16 First-generation bioenergy is currently competitive in some markets, though on average its costs are 17 higher than other forms of final energy. Bioenergy from waste and residues from forestry and 18 agriculture is also currently competitive, but the supply is limited (Aguilar et al. 2020). These costs are 19 context-dependent, and regions having large waste resources are already producing low-cost bioenergy 20 (Jin and Sutherland 2018). In the future, technology costs are anticipated to decrease, but bioenergy 21 produced through cellulosic feedstocks may remain more expensive than fossil alternatives. Large-scale 22 deployment of early opportunities especially in the liquid fuel sector may reduce the technological costs 23 associated with biomass conversion (IEA 2020g). At the same time, the cost of feedstocks may rise as 24 bioenergy requirements increase, especially in scenarios with large bioenergy deployment (Muratori et 25 al. 2020). The costs of bioenergy production pathways are highly uncertain (Table 6.4). 26 27 Table 6.4 The costs of electricity generation, hydrogen production, and second-generation liquid fuels 28 production from biomass in 2020. These costs are adapted from (Daioglou et al. 2020), (Bhave et al. 2017), 29 (NREL 2020a), (Lepage et al. 2021), (Witcover and Williams 2020), (NREL 2020b) Unit Low Median High Bioelectricity with CCS USD/MWh 74 86 160 Bioelectricity without CCS USD/MWh 66 84 112 Biohydrogen with CCS* USD/kg 1.63 2.37 2.41 Biohydrogen without CCS* USD/kg 1.59 1.79 2.37 Liquid biofuels with CCS USD/gge 1.34 4.20 7.85 Liquid biofuels without CCS USD/gge 1.15 4.00 7.60 30 * Using cellulosic feedstocks 31 • Electricity. The costs of baseload electricity production with biomass are higher than corresponding 32 fossil electricity production with and without CCS, and are likely to remain as such without carbon 33 pricing (Bhave et al. 2017). The additional cost associated with CO2 capture are high for 34 conventional solvent-based technologies. However, upcoming technologies such as chemical 35 looping are well-suited to biomass and could reduce CCS costs. 36 • Hydrogen. The costs of hydrogen production from biomass are somewhat higher than, but 37 comparable, to that produced by natural gas reforming with CCS. Further, the incremental costs for 38 incorporating CCS in this process are less than 5% of the levelized costs in some cases, since the Do Not Cite, Quote or Distribute 6-41 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 gasification route creates a high-purity stream of CO2 (Muratori et al. 2017a; Sunny et al. 2020). 2 While these processes have fewer ongoing prototypes/demonstrations, the costs of biomass-based 3 hydrogen (with or without CCS) are substantially cheaper than that produced from electrolysis 4 utilizing solar/wind resources (Kayfeci et al. 2019; Newborough and Cooley 2020), even though 5 electrolysis costs are dropping. 6 • Liquid Biofuels. First-generation sugar-based biofuels (e.g., ethanol produced via fermentation) or 7 biodiesel produced from vegetable oils and animal fats are produced in several countries at large 8 scale and costs competitive with fossil fuels. However, supply is limited. The costs for second 9 generation processes (Fischer-Tropsch and cellulosic ethanol) are higher in most regions (Li et al. 10 2019). Technological learning is projected to reduce these costs by half (IEA 2020g). 11 Large-scale bioenergy production will require more than wastes/residues and cultivation on marginal 12 lands, which may raise conflicts with SDGs relevant to environmental and societal priorities (Gerten et 13 al. 2020; Heck et al. 2018) (Chapter 12). These include competition with food crops, implications for 14 biodiversity, potential deforestation to support bioenergy crop production, energy security implications 15 from bioenergy trade, point-of-use emissions and associated effects on air quality, and water use and 16 fertilizer use (Fajardy and Mac Dowell 2018; Tanzer and Ramírez 2019; Fuss et al. 2018; Brack and 17 King 2020). Overall, the environmental impact of bioenergy production at scale remains uncertain and 18 varies by region and application. 19 Alleviating these issues would require some combination of increasing crop yields, improving 20 conversion efficiencies, and developing advanced biotechnologies for increasing the fuel yield per 21 tonne of feedstock (Henry et al. 2018). Policy structures would be necessary to retain biodiversity, 22 manage water use, limit deforestation and land-use change emissions, and ultimately optimally integrate 23 bioenergy with transforming ecosystems. Large-scale international trade of biomass might be required 24 to support a global bioeconomy, raising questions about infrastructure, logistics, financing options, and 25 global standards for bioenergy production and trade (Box 6.10). Additional institutional and economic 26 barriers are associated with accounting of carbon dioxide removal, including BECCS (Fuss et al. 2014; 27 Muratori et al. 2016; Fridahl and Lehtveer 2018). 28 Life-cycle emissions impacts from bioenergy are subject to large uncertainties and could be 29 incompatible with net zero emissions in some contexts. Due to the potentially large energy conversion 30 requirements and associated GHG emissions (Chapter 7, Chapter 12), bioenergy systems may fail to 31 deliver near-zero emissions depending on operating conditions and regional contexts (Staples et al. 32 2017; Lade et al. 2020; Daioglou et al. 2017; Hanssen et al. 2020; Elshout et al. 2015). As a result, 33 bioenergy carbon neutrality is debated and depends on factors such as the source of biomass, conversion 34 pathways and energy used for production and transport of biomass, and land use changes, as well as 35 assumed analysis boundary and considered timescale (Fan et al. 2021; Wiloso et al. 2016; Zanchi et al. 36 2012; Booth 2018). Similarly, the lifecycle emissions of BECCS remain uncertain and will depend on 37 how effectively bioenergy conversion processes are optimized (Fajardy and Mac Dowell 2017; Tanzer 38 and Ramírez 2019). 39 Acceptability of bioenergy is relatively low compared to other renewable energy sources like solar and 40 wind (Poortinga et al. 2013; EPCC 2017; Peterson et al. 2015; Ma et al. 2015) and comparable to 41 natural gas (Scheer et al. 2013). People also know relatively little about bioenergy compared to other 42 energy sources (Whitmarsh et al. 2011a; EPCC 2017) and tend be be more ambivalent towards 43 bioenergy compared to other mitigation options (Allen and Chatterton 2013). People evaluate biomass 44 from waste products (e.g., food waste) more favourably than grown-for-purpose energy crops, which 45 are more controversial (Demski et al. 2015; Plate et al. 2010). The most pressing concerns for use of 46 woody biomass are air pollution and loss of local forests (Plate et al. 2010). Various types of bioenergy 47 additionally raise concerns about landscape impacts (Whitmarsh et al. 2011a) and biodiversity Do Not Cite, Quote or Distribute 6-42 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 (Immerzeel et al. 2014). Moreover, many people do not see biomass as a renewable energy source, 2 possibly because it involves burning of material. 3 START BOX 6.5 HERE 4 Box 6.5 Methane mitigation options for coal, oil, and gas 5 Methane emissions mainly from coal, oil, and gas currently represent in 2019 about 18% of energy 6 supply sector GHG emissions and 90% of global energy supply non-CO2 emissions in 2019 (Minx et 7 al. 2021b). While approximately 80% of the life-cycle methane emissions in the coal sector occur during 8 underground mining, oil and gas emissions are spread throughout upstream, midstream, and 9 downstream stages (IPCC, 2019) (Alvarez et al. 2018). For this reason, methane reductions from coal 10 mining can be accomplished through coal mine methane recovery (where methane and coal are 11 recovered simultaneously) and from the ventilation air, which can reduce methane emissions by 50– 12 75% (Singh and Hajra 2018; Zhou et al. 2016). Governments incentivize such operations through a 13 number of emissions trading and offset programs (Haya et al. 2020). Methane emissions in the oil and 14 gas sector can be reduced by leak detection and repair, relevant across varying time scales (hours to 15 decades) and regional scopes (component/facility level to continental) (Fox et al. 2019). Around 50% 16 of the methane emitted from oil and gas infrastructure can be mitigated at net-negative costs; that is, 17 the market price of the recovered methane is higher than the mitigation costs (IEA 2021e). As CO2 18 emissions are reduced and fossil fuel consumption decreases, methane emissions associated with these 19 supply chains are anticipated to decline (section 6.7). That said, substantial ‘legacy’ methane emissions 20 – methane leaks after abandonment – will remain even if a complete fossil fuel phase-out takes place. 21 These legacy emissions are estimated to be less than 1–4% of overall methane emissions across all 22 fossil fuel sources (Kholod et al. 2020; Williams et al. 2021b). Even without a complete phase-out, 50- 23 80% of methane emissions from coal, oil and gas could be avoided with currently available technologies 24 at less than USD 50 tCO2-eq-1 (Höglund-Isaksson et al. 2020; Harmsen et al. 2019). Methane recovery 25 from abandoned coal mines could offset most project costs (Singh and Sahu 2018). For abandoned oil 26 and gas wells, low plugging costs could be offset through methane recovery, while high plugging costs 27 would likely require some market or policy support (Kang et al. 2019). 28 [END BOX 6.5 HERE] 29 6.4.2.7. Fossil Energy 30 Fossil fuels could play a role in climate change mitigation if strategically deployed with CCS (high 31 confidence). On the one hand, the primary mechanism for reducing emissions is to eliminate the 32 unabated fossil fuel use. On the other hand, fossil energy combined with CCS provides a means of 33 producing low-carbon energy while still utilizing the available base of fossil energy worldwide and 34 limiting stranded assets. While Section 6.4.2.5 discusses the important aspects of CCS with fossil fuels, 35 this section aims to elucidate the feasibility criteria around these fuels itself. 36 Fossil fuel reserves have continued to rise because of advanced exploration and utilization techniques 37 (high confidence). A fraction of these available reserves can be used consistent with mitigation goals 38 when paired with CCS opportunities in close geographical proximity (high confidence). Based on 39 continued exploration, the fossil fuel resource base has increased significantly; for example, a 9% 40 increase in gas reserves and 12% in oil reserves was observed in the U.S. between 2017 and 2018. This 41 increase is a result of advanced exploration techniques, which are often subsidized (Lazarus and van 42 Asselt 2018; MA et al. 2018). Fossil reserves are distributed unevenly throughout the globe. Coal 43 represents the largest remaining resource (close to 500 ZJ). Conventional oil and gas resources are an 44 order of magnitude smaller (15–20 ZJ each). Technological advances have increased the reserves of 45 unconventional fossil in the last decade. Discovered ultimate recoverable resources of unconventional 46 oil and gas are comparable to conventional oil and gas (Fizaine et al. 2017). Do Not Cite, Quote or Distribute 6-43 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 It is unlikely that resource constraints will lead to a phaseout of fossil fuels, and instead, such a phase- 2 out would require policy action. Around 80% of coal, 50% of gas, and 20% of oil reserves are likely to 3 remain unextractable under 2C constraints (McGlade and Ekins 2015; Pellegrini et al. 2020). Reserves 4 are more likely to be utilized in a low-carbon transition if they can be paired with CCS. Availability of 5 CCS technology not only allows continued use of fossil fuels as a capital resource for countries but also 6 paves the way for CDR through BECCS (Pye et al. 2020; Haszeldine 2016). While the theoretical 7 geologic CO2 sequestration potential is vast, there are limits on how much resource base could be 8 utilized based on geologic, engineering, and source-sink mapping criteria (Budinis et al. 2017). 9 Technological changes have continued to drive down fossil fuel extraction costs. Significant 10 decarbonization potential also exists via diversification of the fossil fuel uses beyond combustion (high 11 evidence). The costs of extracting oil and gas globally have gone down by utilizing hydraulic fracturing 12 and directional drilling for resources in unconventional reservoirs (Wachtmeister and Höök 2020). 13 Although the extraction of these resources is still more expensive than those derived from conventional 14 reservoirs, the large availability of unconventional resources has significantly reduced global prices. 15 The emergence of liquefied natural gas (LNG) markets has also provided opportunities to export natural 16 gas significant distances from the place of production (Avraam et al. 2020). The increase in availability 17 of natural gas has been accompanied by an increase in the production of natural gas liquids as a co- 18 product to oil and gas. Over the period from 2014 to 2019, exports of natural gas liquids increased by 19 160%. Natural gas liquids could potentially be a lower-carbon alternative to liquid fuels and 20 hydrocarbons. On the demand side, natural gas can be used to produce hydrogen using steam methane 21 reforming, which is a technologically mature process (Sections 6.4.4, 6.4.5). When combined with 90% 22 CO2 capture, the costs of producing hydrogen are around USD 1.5–2 kg(H2)-1 (Newborough and Cooley 23 2020; Collodi et al. 2017), considerably less than hydrogen produced via electrolysis. 24 Significant potential exists for gasifying deep-seated coal deposits in situ to produce hydrogen. Doing 25 so reduces fugitive methane emissions from underground coal mining. The integration costs of this 26 process with CCS are less than with natural gas reforming. The extent to which coal gasification could 27 be compatible with low-carbon energy would depend on the rate of CO2 capture and the ultimate use of 28 the gas (Verma and Kumar 2015). Similarly, for ongoing underground mining projects, coal mine 29 methane recovery can be economic for major coal producers such as China and India. Coal mine 30 methane and ventilation air methane recovery can reduce the fugitive methane emissions by 50–75% 31 (Zhou et al. 2016; Singh and Sahu 2018). 32 The cost of producing electricity from fossil sources has remained roughly the same with some regional 33 exceptions while the costs of transport fuels has gone down significantly (high confidence). The cost of 34 producing electricity from fossil fuels has remained largely static, with the exception of some regional 35 changes, for example, a 40% cost reduction in the U.S. for natural gas (Rai et al. 2019), where the gas 36 wellhead price has declined by almost two-thirds due to large reserves. Similarly, the global price of 37 crude oil has declined from almost USD 100–55 bbl-1 in the last five years. 38 The energy return of investment (EROI) is a useful indicator of full fossil lifecycle costs. Fossil fuels 39 create significantly more energy per unit energy invested – or in other words have much larger EROI – 40 than most cleaner fuels such as biomass or electrolysis-derived hydrogen, where intensive processing 41 reduces EROI (Hall et al. 2014). That said, recent years have seen a decrease in fossil EROI, especially 42 as underground coal mining has continued in China. Exploitation of unconventional gas reservoirs is 43 also energy intensive and has led to a reduction in EROI. The primary energy EROI of fossil fuels has 44 converged at about 30, which represents a 20-point decrease from the 1995 value for coal (Brockway 45 et al. 2019). When processing and refining stages are considered, these EROI values further decrease. 46 Several countries have large reserves of fossil fuels. Owing to climate constraints, these may become 47 stranded causing considerable economic impacts (6.7.3, 6.7.4, Box 6.13) (high confidence). While 48 global fossil energy resources are greater than 600 ZJ, more than half of these resources would likely Do Not Cite, Quote or Distribute 6-44 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 be unburnable even in the presence of CCS (Pye et al. 2020; McGlade and Ekins 2015). This would 2 entail a significant capital loss for the countries with large reserves. The total amount of stranded assets 3 in such a case would amount to USD 1–4 trillion at present value (Box 6.13). 4 Apart from CO2 emissions and air pollutants from fossil fuel combustion, other environmental impacts 5 include fugitive methane leakages and implications to water systems. While the rate of methane leakage 6 from unconventional gas systems is uncertain, their overall GHG impact is less than coal (Deetjen and 7 Azevedo 2020; Tanaka et al. 2019). The stated rate of leakage in such systems ranges from 1-8%, and 8 reconciling different estimates requires a combination of top-down and bottom-up approaches (Grubert 9 and Brandt 2019; Zavala-Araiza et al. 2015). Similarly, for coal mining, fugitive methane emissions 10 have grown despite some regulations on the degree to which emission controls must be deployed. 11 Recent IPCC inventory guidance also notes considerable CO2 emissions resulting from spontaneous 12 combustion of the coal surface, and accounting for these emissions will likely increase the overall life- 13 cycle emissions by 1–5% (Fiehn et al. 2020; Singh 2019; IPCC 2019). 14 Another key issue consistently noted with unconventional wells (both oil and gas, and coalbed methane) 15 is the large water requirements (Qin et al. 2018). The overall water footprint of unconventional 16 reservoirs is higher than conventional reservoirs because of higher lateral length and fracturing 17 requirements (Scanlon et al. 2017; Kondash et al. 2018). Moreover, produced water from such 18 formations is moderately to highly brackish, and treating such waters has large energy consumption 19 (Singh and Colosi 2019; Bartholomew and Mauter 2016). 20 Oil and coal consistently rank among the least preferred energy sources in many countries (high 21 confidence). The main perceived advantage of fossil energy is the relatively low costs, and emphasizing 22 these costs might increase acceptability somewhat (Pohjolainen et al. 2018; Hazboun and Boudet 2020; 23 Boyd et al. 2019). Acceptability of fossil fuels is on average similar to acceptability of nuclear energy, 24 although evaluations are less polarized. People evaluate natural gas as somewhat more acceptable than 25 other fossil fuels, although they generally oppose hydraulic fracturing (Clarke et al. 2016). Yet, natural 26 gas is evaluated as less acceptable than renewable energy sources, although evaluations of natural gas 27 and biogas are similar (Liebe and Dobers 2019; Plum et al. 2019). Acceptability of fossil energy tends 28 to be higher in countries and regions that strongly rely on them for their energy production (Boyd et al. 29 2019; Pohjolainen et al. 2018). Combining fossil fuels with CCS can increase their acceptability (Van 30 Rijnsoever et al. 2015; Bessette and Arvai 2018). Some people seem ambivalent about natural gas, as 31 they perceive both benefits (e.g., affordability, less carbon emissions than coal) and disadvantages (e.g., 32 finite resource, contributing to climate change) (Blumer et al. 2018). 33 Fossil fuel subsidies have been valued of the order of USD 0.5–5 trillion annually by various estimates 34 which have the tendency to introduce economic inefficiency within systems (Merrill et al. 2015; Jakob 35 et al. 2015) (high confidence). Subsequent reforms have been suggested by different researchers who 36 have estimated reductions in CO2 emissions may take place if these subsidies are removed (Mundaca 37 2017). Such reforms could create the necessary framework for enhanced investments in social welfare 38 – through sanitation, water, clean energy - with differentiating impacts (Edenhofer 2015). 39 6.4.2.8 Geothermal Energy 40 Geothermal energy is heat stored in the Earth’s subsurface and is a renewable resource that can be 41 sustainably exploited. The geophysical potential of geothermal resources is 1.3 to 13 times the global 42 electricity demand in 2019 (medium confidence). Geothermal energy can be used directly for various 43 thermal applications, including space heating and industrial heat input, or converted to electricity 44 depending on the source temperature (Moya et al. 2018; REN21 2019; Limberger et al. 2018). 45 Suitable aquifers underlay 16% of the Earth's land surface and store an estimated 110,000–1,400,000 46 PWh (400,000–1,450,000 EJ) that could theoretically be used for direct heat applications. For electricity 47 generation, the technical potential of geothermal energy is estimated to be between 30 PWh yr -1 (108 Do Not Cite, Quote or Distribute 6-45 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 EJ yr-1) (to 3 km depth) and 300 PWh yr-1 (1080 EJ yr-1) (to 10 km depth). For direct thermal uses, the 2 technical potential is estimated to range from 2.7–86 PWh yr-1 (9.7–310 EJ yr-1)(IPCC 2011). Despite 3 the potential, geothermal direct heat supplies only 0.15% of the annual global final energy consumption. 4 The technical potential for electricity generation, depending on the depth, can meet one third to almost 5 three times the global final consumption (based on IEA database for IPCC). The mismatch between 6 potential and developed geothermal resources is caused by high up-front costs, decentralized 7 geothermal heat production, lack of uniformity among geothermal projects, geological uncertainties, 8 and geotechnical risks (IRENA 2017a; Limberger et al. 2018). A limited number of countries have a 9 long history in geothermal. At least in two countries (Iceland and New Zealand), geothermal accounts 10 for 20–25% of electricity generation (Spittler et al. 2020; Pan et al. 2019). Furthermore, in Iceland 11 approximately 90% of the households are heated with geothermal energy. In Kenya, as of July 2019, 12 geothermal accounted for 734 MW effective capacity spread over 10 power plants and approximately 13 one third of the total installed capacity (Kahlen 2019). 14 15 Figure 6.15 Global weighted average total installed costs, capacity factors and LCOE for geothermal 16 power per year (2010-2020). The shaded area represents the 5% and 95% percentiles. Source: (IRENA 17 2021a) 18 There are two main types of geothermal resources: convective hydrothermal resources, in which the 19 Earth’s heat is carried by natural hot water or steam to the surface, and hot, dry rock resources, in which 20 heat cannot be extracted using water or steam, and other methods must be developed. There are three 21 basic types of geothermal power plants: (1) dry steam plants use steam directly from a geothermal 22 reservoir to turn generator turbines; (2) flash steam plants take high-pressure hot water from deep inside 23 the Earth and convert it to steam to drive generator turbines and (3) binary cycle power plants transfer 24 the heat from geothermal hot water to another liquid. Many of the power plants in operation today are 25 dry steam plants or flash plants (single, double and triple) harnessing temperatures of more than 180°C. 26 However, medium temperature fields are increasingly used for electricity generation or combined heat 27 and power. The use of medium temperature fields has been enabled through the development of binary 28 cycle technology, in which a geothermal fluid is used via heat exchangers. Increasing binary generation 29 technologies are now being utilized instead of flash steam power plants. This will result in almost 100% 30 injection and essentially zero GHG emissions, although GHG emissions from geothermal power 31 production are generally small compared to traditional baseload thermal energy power generation 32 facilities (Fridriksson et al. 2016). 33 Additionally, new technologies are being developed like Enhanced Geothermal Systems (EGS), which 34 is in the demonstration stage (IRENA 2018), deep geothermal technology, which may increase the 35 prospects for harnessing the geothermal potential in a large number of countries, or shallow-geothermal 36 energy, which represents a promising supply source for heating and cooling buildings (Narsilio and Aye 37 2018). Successful large-scale deployment of shallow geothermal energy will depend not only on site- 38 specific economic performance but also on developing suitable governance frameworks (Bloemendal Do Not Cite, Quote or Distribute 6-46 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 et al. 2018; García-Gil et al. 2020). Technologies for direct uses like district heating, geothermal heat 2 pumps, greenhouses, and other applications are widely used and considered mature. Given the limited 3 number of plants commissioned, economic indicators (Figure 6.15) vary considerably depending on site 4 characteristics. 5 Public awareness and knowledge of geothermal energy is relatively low (high confidence). Geothermal 6 energy is evaluated as less acceptable than other renewable energy sources such as solar and wind, but 7 is preferred over fossil and nuclear energy, and in some studies, over hydroelectric energy (Karytsas et 8 al. 2019; Pellizzone et al. 2015; Steel et al. 2015; Hazboun and Boudet 2020) (high confidence). Some 9 people are concerned about the installation of geothermal facilities close to their homes, similar to solar 10 and wind projects (Pellizzone et al. 2015). The main concerns about geothermal energy, particularly for 11 large scale, high-temperature geothermal power generation plants, involve water usage, water scarcity, 12 and seismic risks of drilling (Dowd et al. 2011). Moreover, noise, smell and damages to the landscape 13 have been reasons for protests against specific projects (Walker 1995). However, with the 14 implementation of modern technologies, geothermal presents fewer adverse environmental impacts. At 15 the same time, people perceive geothermal energy as relatively environmentally friendly (Tampakis et 16 al. 2013). 17 6.4.2.9 Marine Energy 18 The ocean is a vast source of energy (Hoegh-Guldberg et al. 2019). Ocean energy can be extracted from 19 tides, waves, ocean thermal energy conversion (OTEC), currents, and salinity gradients (Bindoff et al. 20 2019). Their technical potentials, without considering possible exclusion zones, are explored below. 21 Tidal energy, which uses elevation differences between high and low tides, appears in two forms: 22 potential energy (rise and fall of the tide) and current energy (from tidal currents). The global technically 23 harvestable tidal power from areas close to the coast is estimated as ~1.2 PWh yr-1 (4.3 EJ yr-1) (IRENA 24 2020b). The potential for tidal current energy is estimated to be larger than that for tidal range or barrage 25 (Melikoglu 2018). Ocean wave energy is abundant and predictable and can be extracted directly from 26 surface waves or pressure fluctuations below the surface (Melikoglu 2018). Its global theoretical 27 potential is 29.5 PWh yr-1 (106 EJ yr-1) ,which means that wave energy alone could meet all global 28 energy demand (Mørk et al. 2010; IRENA 2020b). The temperature gradients in the ocean can be 29 exploited to produce energy, and its total estimated available resource could be up to 44.0 PWh yr -1 30 (158 EJ yr-1) (Rajagopalan and Nihous 2013). Salinity gradient energy, also known as osmotic power, 31 has a global theoretical potential of over 1.6 PWh yr-1 (6.0 EJ yr-1) (IRENA 2020b). The greatest 32 advantage of most marine energy, excluding wave energy, is that their sources are highly regular and 33 predictable, and energy can be furthermore generated both day and night. An additional use of sea water 34 is to develop lower-cost district cooling systems near the sea (Hunt et al. 2019). The greatest barrier to 35 most marine technology advances is the relatively high upfront costs, uncertainty on environmental 36 regulation and impact, need for investments and insufficient infrastructure (Kempener and Neumann 37 2014a,b). There are also concerns about technology maturity and performance; thus, not all have the 38 potential to become economically viable (IRENA 2020b). 39 6.4.2.10 Waste-to-Energy 40 Waste-to-energy (WTE) is a strategy to recover energy from waste in a form of consumable heat, 41 electricity, or fuel (Zhao et al. 2016). Thermal (incineration, gasification, and pyrolysis) and biological 42 (anaerobic digestion and landfill gas to energy) technologies are commonly used (Ahmad et al. 43 2020).When WTE technologies are equipped with proper air pollution reduction facilities they can 44 contribute to clean electricity production and reduction of GHG emissions. However, if not properly 45 operated, they can exacerbate air quality issues. 46 In 2019, there were more than 1,200 WTE incineration facilities worldwide, with estimated capacity of 47 310 million tons per year (UNECE 2020). It is estimated that treatment of a minimum of 261 million Do Not Cite, Quote or Distribute 6-47 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 tons/year of waste could produce 283 TWh (1 EJ) of power and heat by 2022 (Awasthi et al., 2019). 2 Incineration plants can reduce the mass of waste by 70%-80% and the volume of waste by 80%-90% 3 (Haraguchi et al. 2019). Incineration technology can reduce water and soil pollution (Gu et al., 2019). 4 However, if not properly handled, dust, and gases such as SO2, HCL, HF, NO2, and dioxins in the flue 5 gases can harm the environment (Mutz et al. 2017). Anaerobic digestion technology has a positive 6 environmental impact and the ability to reduce GHG emissions (Ayodele et al. 2018; Cudjoe et al. 7 2020). The by-product of the anaerobic digestion process could be used as a nutrient-rich fertilizer for 8 enhancing soil richness for agricultural purposes (Wainaina et al. 2020). Due to the potential negative 9 impacts on domestic environment and residents’ health, WTE projects such as incineration encounter 10 substantial opposition from the local communities in which they are located (Ren et al., 2016; Baxter 11 et al., 2016). Therefore, for WTE to be deployed more widely, policies would need to be tailored with 12 specific guidelines focused on mitigating emissions, which may have adverse effect on the environment. 13 Depending on the origin of the waste used, the integration of WTE and carbon capture and storage 14 (CCS) could enable waste to be a net zero or even net negative emissions energy source (Kearns 2019; 15 Wienchol et al. 2020). For example, in Europe only, the integration of CCS with WTE facilities has the 16 potential to capture about 60 to 70 million tons of carbon dioxide annually (Tota et al. 2021). 17 Waste-to-energy is an expensive process compared to other energy sources such as fossil fuels and 18 natural gas (Mohammadi and Harjunkoski 2020). However, the environmental and economic benefits 19 make its high financial costs justifiable. In 2019, the global WTE market size was valued at USD 31 20 billion, and it is predicted to experience 7.4% annual growth until 2027 (UNECE 2020). 21 22 6.4.3 Energy System Integration 23 Greenhouse gases are emitted across all economic activities. Therefore, cost-effective decarbonization 24 requires a “system of systems” approach that considers the interaction between different energy sectors 25 and systems. Flexibility technologies and advanced control of integrated energy systems (e.g., 26 considering the interaction between electricity, heating/cooling, gas/hydrogen, transport sectors) could 27 reduce energy infrastructure investments substantially in future low-carbon energy systems (Strbac et 28 al. 2015b; Jacobson et al. 2019) 29 The electricity grid will serve as a backbone of future low-carbon energy systems. Integration of large 30 amounts of VRE generation (Hansen et al. 2019), particularly wind and solar generation (Perez et al. 31 2019; Bistline and Young 2019), presents economic and technical challenges to electricity system 32 management across different timescales from sub-seconds, hours, days, seasons, to multiple years. 33 Furthermore, electrification of segments of the transport and heat sectors could disproportionately 34 increase peak demand relative to supply (Bistline et al. 2021). Increases in peak demand may require 35 reinforcing network infrastructures and generation in the historical passive system operation paradigm 36 (Strbac et al. 2020). 37 These challenges to electricity system management can be addressed through system integration and a 38 digitalized control paradigm involving advanced information and communication technologies. Real- 39 time maintenance of supply-demand balance and sufficient flexibility technologies such as electricity 40 storage, flexible demand, and grid forming converters (Strbac et al. 2015a; López Prol and Schill 2021) 41 would be increasingly valuable for incorporating larger amounts of VRE generation. This flexibility 42 will be particularly important to deal with sudden losses of supply, for example, due to a failure of a 43 large generator or interconnector or a rapid increase in demand (Teng et al. 2017; Chamorro et al. 2020). 44 The transition to a digitalized-based electricity system control paradigm would facilitate radical changes 45 in the security of supply, moving from the traditional approach of redundancy in assets to a smart control Do Not Cite, Quote or Distribute 6-48 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 paradigm. Advanced control and communication systems can significantly reduce the electricity system 2 investment and operation costs (2020; Münster et al. 2020; Harper et al. 2018). 3 Importance of cross-sector coupling for cost-effective energy system decarbonization 4 Integrated whole-system approaches can reduce the costs of low-carbon energy system transitions (high 5 confidence). A lack of flexibility in the electricity system may limit the cost-effective integration of 6 technologies as part of broader net zero energy systems. At the same time, the enormous latent 7 flexibility hidden in heating and cooling, hydrogen, transport, gas systems, and other energy systems 8 provides opportunities to take advantage of synergies and to coordinate operations across systems 9 (Martinez Cesena and Mancarella 2019; Zhang et al. 2018; Bogdanov et al. 2021; Pavičević et al. 2020; 10 Martin et al. 2017) (Figure 6.16). 11 Sector coupling can significantly increase system flexibility, driven by the application of advanced 12 technologies (Bogdanov et al. 2019; Solomon et al. 2019; Clegg and Mancarella 2016; Zhang and 13 Fujimori 2020; Zhao et al. 2021; Heinen et al. 2016; Zhang et al. 2019b). For example, district heating 14 infrastructure can generate both heat and power. Cooling systems and electrified heating systems in 15 buildings can provide flexibility through preheating and precooling via thermal energy storage Li, G. 16 et al. 2017; Li, Z. et al. 2016).. System balancing services can be provided by electric vehicles (EVs) 17 based on vehicle-to-grid concepts and deferred charging through smart control of EV batteries without 18 compromising customers’ requirements for transport (Aunedi and Strbac 2020). 19 Hydrogen production processes (power-to-gas and vice versa) and hydrogen storage can support short- 20 term and long-term balancing in the energy systems and enhance resilience (Stephen and Pierluigi 2016; 21 Strbac et al. 2020). However, the economic benefits of flexible power-to-gas plants, energy storage, 22 and other flexibility technological and options will depend on the locations of VRE sources, storage 23 sites, gas, hydrogen, and electricity networks (Jentsch et al. 2014; Heymann and Bessa 2015; Ameli et 24 al. 2020). Coordinated operation of gas and electricity systems can bring significant benefits in 25 supplying heat demands. For example, hybrid heating can eliminate investment in electricity 26 infrastructure reinforcement by switching to heat pumps in off-peak hours and gas boilers in peak hours 27 ( Dengiz et al. 2019; Fischer et al. 2017; Bistline et al. 2021). The heat required by direct air carbon 28 capture and storage (DACCS) could be effectively supplied by inherent heat energy in nuclear plants, 29 enhancing overall system efficiency (Realmonte et al. 2019). 30 31 Figure 6.16 Interaction between different energy sectors (extracted from Münster et al. 2020) 32 Rather than incremental planning, strategic energy system planning can help minimize long-term 33 mitigation costs (high confidence). With a whole-system perspective, integrated planning can consider 34 both short-term operation and long-term investment decisions, covering infrastructure from local to 35 national and international, while meeting security of supply requirements and incorporating the Do Not Cite, Quote or Distribute 6-49 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 flexibility provided by different technologies and advanced control strategies (Zhang et al. 2018; 2 O’Malley et al. 2020; Strbac et al. 2020). Management of conflicts and synergies between local district 3 and national level energy system objectives, including strategic investment in local hydrogen and heat 4 infrastructure, can drive significant whole-system cost savings (Fu et al. 2020; Zhang et al. 2019b). For 5 example, long-term planning of the offshore grid infrastructure to support offshore wind development, 6 including interconnection between different countries and regions, can provide significant savings 7 compared to a short-term incremental approach in which every offshore wind farm is individually 8 connected to the onshore grid (E3G 2021). 9 6.4.3.1 Role of flexibility technologies 10 Flexibility technologies - including energy storage, demand-side response, flexible/dispatchable 11 generation, grid forming converters, and transmission interconnection - as well as advanced control 12 systems, can facilitate cost-effective and secure low-carbon energy systems (high confidence). 13 Flexibility technologies have already been implemented, but they can be enhanced and deployed more 14 widely. Due to their interdependencies and similarities, there can be both synergies and conflicts for 15 utilizing these flexibility options (Bistline et al. 2021). It will therefore be important to coordinate the 16 deployment of the potential flexibility technologies and smart control strategies. Important electricity 17 system flexibility options include the following: 18 • Flexible/dispatchable generation: Advances in generation technologies, for example, gas/hydrogen 19 plants and nuclear plants, can enable them to provide flexibility services. These technologies would 20 start more quickly, operate at lower power output, and make faster output changes, enabling more 21 secure and cost-effective integration of VRE generation and end-use electrification. There are 22 already important developments in increasing nuclear plants flexibility (e.g., in France (Office of 23 Nuclear Energy 2021)) and the development of small modular reactors, which could support system 24 balancing (FTI Consulting 2018). 25 • Grid-forming converters (inverters): The transition from conventional electricity generation, 26 applying mainly synchronous machines to inverter-dominated renewable generation, creates 27 significant operating challenges. These challenges are mainly associated with reduced synchronous 28 inertia, system stability, and black start capability. Grid-forming converters will be a cornerstone 29 for the control of future electricity systems dominated by VRE generation. These converters will 30 address critical stability challenges, including the lack of system inertia, frequency and voltage 31 regulation, and black-start services while reducing or eliminating the need to operate conventional 32 generation (Tayyebi et al. 2019). 33 • Interconnection: Electricity interconnections between different regions can facilitate more cost- 34 effective renewable electricity deployment. Interconnection can enable large-scale sharing of 35 energy and provide balancing services. Back-up energy carriers beyond electricity, such as 36 ammonia, can be shared through gas/ammonia/hydrogen-based interconnections, strengthening 37 temporal coupling of multiple sectors in different regions (Bhagwat et al. 2017; Brown et al. 2018) 38 (Section 6.4.5). 39 • Demand-side response: Demand-side schemes – including, for example, smart appliances, EVs, 40 and building-based thermal energy storage (Heleno et al. 2014) – can provide flexibility services 41 across multiple time frames and systems. Through differentiation between essential and non- 42 essential needs during emergency conditions, smart control of demands can significantly enhance 43 system resilience (Chaffey 2016). 44 • Energy storage: Energy storage technologies (Section 6.4.4) can act as both demand and generation 45 sources. They can provide services such as system balancing, various ancillary services, and 46 network management. Long-duration energy storage can significantly enhance the utilization of 47 renewable energy sources and reduce the need for firm low-carbon generation (Sepulveda et al. 48 2021). Do Not Cite, Quote or Distribute 6-50 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 6.4.3.2 Role of digitalization and advanced control systems 2 A digitalized energy system can significantly reduce energy infrastructure investments while enhancing 3 supply security and resilience (high confidence) (Andoni et al. 2019; Strbac et al. 2020). Significant 4 progress has been made in the development of technologies essential for the transition to a digitalized 5 energy control paradigm, although the full implementation is still under development. Electrification 6 and the increased integration of the electricity system with other systems will fundamentally transform 7 the operational and planning paradigm of future energy infrastructure. A fully intelligent and 8 sophisticated coordination of the multiple systems through smart control will support this paradigm 9 shift. This shift will provide significant savings through better utilization of existing infrastructure 10 locally, regionally, nationally, and internationally. Supply system reliability will be enhanced through 11 advanced control of local infrastructure (Strbac et al. 2015a). Furthermore, this paradigm shift offers 12 the potential to increase energy efficiency through a combination of technologies that gather and analyse 13 data and consequently optimize energy use in real-time. 14 The transition to advanced data-driven control of energy system operations (Sun et al. 2019a; Cremer 15 et al. 2019) will require advanced information and communication technologies and infrastructure, 16 including the internet, wireless networks, computers, software, middleware, smart sensors, internet of 17 things components, and dedicated technological developments (Hossein Motlagh et al. 2020). The 18 transition will raise standardization and cybersecurity issues, given that digitalization can become a 19 single point of failure for the complete system (Unsal et al. 2021; Ustun and Hussain 2019). 20 Implementing peer-to-peer energy trading based on blockchain is expected to be one of the key elements 21 of next-generation electricity systems (Qiu et al. 2021). This trading will enable consumers to drive 22 system operation and future design, increasing overall system efficiency and security of supply while 23 reducing emissions without sacrificing users’ privacy (Andoni et al. 2019; Ahl et al. 2020). When 24 deployed with smart contracts, this concept will be suitable for energy systems involving many 25 participants, where a prerequisite is digitalization (e.g., smart meters, end-use demand control systems) 26 (Teufel et al. 2019; Juhar and Khaled 2018). 27 6.4.3.3 System benefits of flexibility technologies and advanced control systems 28 New sources of flexibility and advanced control systems provide a significant opportunity to reduce 29 low-carbon energy system costs by enhancing operating efficiency and reducing energy infrastructure 30 and low-carbon generation investments, while continuing to meet security requirements (high 31 confidence). In the U.S, for example, one study found that flexibility in buildings alone could reduce 32 U.S. CO2 emissions by 80 MT yr-1 and save USD 18 bn yr-1 in electricity system costs by 2030 33 (Satchwell et al. 2021). Key means for creating savings are associated with the following: 34 • Efficient energy system operation: Flexibility technologies such as storage, demand-side response, 35 interconnection, and cross-system control will enable more efficient, real-time demand and supply 36 balancing. This balancing has historically been provided by conventional fossil-fuel generation 37 (Nuytten et al. 2013). 38 • Savings in investment in low carbon/renewable generation capacity: System flexibility sources can 39 absorb or export surplus electricity, thus reducing or avoiding energy curtailment and reducing the 40 need for firm low-carbon capacity such as nuclear and fossil-fuel plants with CCS (Newbery et al. 41 2013; Solomon et al. 2019). For example, one study found that flexibility technologies and 42 advanced control systems could reduce the need for nuclear power by 14 GW and offshore wind by 43 20 GW in the UK’s low-carbon transition (Strbac et al. 2015b). 44 • Reduced need for backup capacity: System flexibility can reduce energy demand peaks, reducing 45 the required generation capacity to maintain the security of supply, producing significant savings 46 in generation investments (Strbac et al. 2020). 47 • Deferral or avoidance of electricity network reinforcement/addition: Flexibility technologies 48 supported by advanced control systems can provide significant savings in investment in electricity Do Not Cite, Quote or Distribute 6-51 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 network reinforcement that might emerge from increased demand, for example, driven by 2 electrification of transport and heat sectors. Historical network planning and operation standards 3 are being revised considering alternative flexibility technologies, which would further support cost- 4 effective integration of decarbonized transport and heat sectors (Strbac et al. 2020). 5 6.4.4 Energy Storage for Low-Carbon Grids 6 Energy storage technologies make low carbon electricity systems more cost-effective, allowing VRE 7 technologies to replace more expensive firm low carbon generation technologies (Carbon Trust 2016) 8 and reducing investment costs in backup generation, interconnection, transmission, and distribution 9 network upgrades (high confidence). Energy system decarbonization relies on increased electrification 10 (Section 6.6.2.3.). Meeting increasing demands with variable renewable sources presents challenges 11 and could lead to costly infrastructure reinforcements. Energy storage enables electricity from variable 12 renewables to be matched against evolving demands across both time and space, using short-, medium- 13 and long-term storage of excess energy for delivery later or different location. In 2017, an estimated 14 4.67 TWh (0.017 EJ) of electricity storage was in operation globally (IRENA 2017). If the integration 15 of renewables is doubled from 2014 levels by 2030, the total capacity of global electricity storage could 16 triple, reaching 11.89–15.27 TWh (0.043–0.055 EJ)(IRENA 2017b). 17 18 Table 6.5 Suitability of low carbon energy storage technologies, in terms of the grid services they can 19 provide, and overall features such as technology maturity, where Low represents an emerging 20 technology; Med represents a maturing technology and High a fully mature technology. The opportunity 21 for the cost of a technology to reduce over the next decade is represented by Low, Med and High and the 22 lifetime of installations by: Long, for projects lasting more than 25 years; Med for those lasting 15–25 23 years; Short, for those lasting less than 15 years. (PHS - Pumped Hydroelectric Storage, CAES - 24 Compressed Air Energy Storage, LAES - Liquid Air Energy Storage, TES - Thermal Energy Storage, 25 FES - Flywheel Energy Storage, LiB – Li-ion Batteries, Scap – Supercapacitors, RFB - Redox Flow 26 Batteries, RHFC - Reversible Hydrogen Fuel Cells, PtX – Power to fuels). [Footnote: References: PHS – 27 IRENA 2017, Barbour et al. 2016, Yang 2016; CAES – Brandon et al. 2015, IRENA 2017, Luo et al. 28 2014; LAES – Luo et al. 2014, Highview 2019; TES – Brandon et al. 2015, Smallbone et al. 2017, Gallo et 29 al. 2016; FES – Yulong et al. 2017, IRENA 2017; LiB – IRENA 2017, Hammond and Hazeldine 2015, 30 Staffell, I. and Rustomji, M. et al. 2016, Schmidt et al. 2017c,Nykvist and Nilsson 2015, May et al. 2018, 31 IRENA 2015b; Scap – Brandon et al. 2015, Gur 2018; RFB – IRENA 2017; RHFC – Gur 2018, IEA 2015] Suitability factor PHS CAES LAES TES FES LiB Scap RFB PtX RHF C Upgrade deferral Energy Arbitrage Capacity firming Seasonal storage Stability Frequency regulation Voltage support Black start Short term reserve Fast reserve Islanding Uninterruptible power supply Maturity High High Med Low High Med Low Low Low Low Do Not Cite, Quote or Distribute 6-52 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 Opportunity to reduce Low Low Low Med Med High High High Med High costs Lifetime Long Long Long Long Med Short Med Med Med Short Roundtrip Efficiency 60– 30– 55– 70– 90% >95% >95 80– 35– <30% 80% 60% 90% 80% % 90% 60% 1 2 Energy storage technologies can provide a range of different grid services (Table 6.5). Energy storage 3 enhances security of supply by providing real time system regulation services (voltage support, 4 frequency regulation, fast reserve, and short-term reserve). A greater proportion of variable renewable 5 sources reduces system inertia, requiring more urgent responses to changes in system frequency, which 6 rapid response storage technologies can provide (stability requires responses within sub second 7 timescale for provision of frequency and voltage control services). Energy storage also provides 8 intermittent renewable sources with flexibility, allowing them to contribute a greater proportion of 9 electrical energy and avoiding curtailment (capacity firming). Investment costs in backup generation, 10 interconnection, transmission, and distribution network upgrades can thus be reduced (upgrade 11 deferral), meaning that less low carbon generation will need to be built while still reducing emissions. 12 In the event of an outage, energy storage reserves can keep critical services running (islanding) and 13 restart the grid (black start). The ability to store and release energy as required provides a range of 14 market opportunities for buying and selling of energy (arbitrage). 15 No single, sufficiently mature energy storage technology can provide all the required grid services - a 16 portfolio of complementary technologies working together can provide the optimum solution (high 17 confidence). Different energy storage technologies can provide these services and support cost-effective 18 energy system decarbonization (Carbon Trust 2016). To achieve very low carbon systems, significant 19 volumes of storage will be required (Strbac et al. 2015a; Section 0). There are few mature global supply 20 chains for many of the less-developed energy storage technologies. This means that although costs 21 today may be relatively high, there are significant opportunities for future cost reductions, both through 22 technology innovation and through manufacturing scale. Adding significant amounts of storage will 23 reduce the price variation and, therefore, the profitability of additional and existing storage, increasing 24 investment risk. 25 Energy storage extends beyond electricity storage and includes technologies that can store energy as 26 heat, cold, and both liquid and gaseous fuels. Energy storage is a conversion technology, enabling 27 energy to be converted from one form to another. This diversification improves the overall resilience 28 of energy systems, with each system being able to cover supply shortfalls in the others. For example, 29 storage can support the electrification of heating or cooling, as well as transport through electric 30 vehicles, powered by batteries or by fuel cells. Storage significantly reduces the need for costly 31 reinforcement of local distribution networks through smart charging schemes and the ability to flow 32 electricity back to the grid (e.g., through vehicle-to-grid). By capturing otherwise wasted energy 33 streams, such as heat or cold, energy storage improves the efficiency of many systems, such as 34 buildings, data centres and industrial processes. 35 6.4.4.1 Energy Storage Technologies 36 Pumped Hydroelectric Storage (PHS). PHS makes use of gravitational potential energy, using water as 37 the medium. Water is pumped into an elevated reservoir using off-peak electricity and stored for later 38 release when electricity is needed. These closed-loop hydropower plants have been in use for decades 39 and account for 97% of worldwide electricity storage capacity (IEA, 2018b; IRENA, 2017). PHS is best 40 suited to balancing daily energy needs at a large scale, and advances in the technology now allow both 41 rapid response and power regulation in both generating and pumping mode (Valavi and Nysveen 2018; 42 Kougias et al. 2019; Dong et al. 2019). The construction itself can cause disruption to the local 43 community and environment (Hayes et al. 2019), the initial investment is costly, and extended Do Not Cite, Quote or Distribute 6-53 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 construction periods delay return on investment (Section 6.4.2.3). In addition, locations for large-scale 2 PHS plants are limited. 3 Advanced pump-turbines are being developed, allowing both reversible and variable-speed operation, 4 supporting frequency control and grid stability with improved round-trip efficiencies (Ardizzon et al. 5 2014). New possibilities are being explored for small-scale PHS installations and expanding the 6 potential for siting (Kougias et al. 2019). For example, in underwater PHS, the upper reservoir is the 7 sea, and the lower is a hollow deposit at the seabed. Seawater is pumped out of the deposit to store off- 8 peak energy and re-enters through turbines to recharge it (Kougias et al. 2019). Using a similar concept, 9 underground siting in abandoned mines and caverns could be developed reasonably quickly (IEA 10 2020h). Storage of energy as gravitational potential can also be implemented using materials other than 11 water, such as rocks and sand. Pumped technology is a mature technology (Barbour et al. 2016; Rehman 12 et al. 2015) and can be important in supporting the transition to future low carbon electricity grids (IHA 13 2021). 14 Batteries. There are many types of batteries, all having unique features and suitability (c), but their key 15 feature is their rapid response times. A rechargeable battery cell is charged by using electricity to drive 16 ions from one electrode to another, with the reverse occurring on discharge, producing a usable electric 17 current (Crabtree et al. 2015). While lead-acid batteries (LABs) have been widely used for automotive 18 and grid applications for decades (May et al. 2018), li-ion batteries (LIBs) are increasingly being used 19 in grid-scale projects (Crabtree et al. 2015), displacing LABs. The rapid response time of batteries 20 makes them suitable for enhanced frequency regulation and voltage support, enabling the integration of 21 variable renewables into electricity grids (Strbac and Aunedi 2016). Batteries can provide almost all 22 electricity services, except for seasonal storage. Lithium-ion batteries, in particular, can store energy 23 and power in small volumes and with low weight, making them the default choice for EVs (Placke et 24 al. 2017). EV batteries are expected to form a distributed storage resource as this market grows, both 25 impacting and supporting the grid (Staffell and Rustomji 2016). 26 27 Table 6.6 Technical characteristics of a selected range of battery chemistries, categorized as those which 28 precede LIBs (white background), LIBs (yellow background) and post LIBs (blue background). With the 29 exception of the All Solid-State batteries, all use liquid electrolytes. (1 =Mahmoudzadeh et al. 2017; 2 = 30 Manzetti and Mariasiu 2015; 3 =Placke et al. 2017; 4 = Nykvist and Nilsson 2015; 5 =Cano et al. 2018; 6 = 31 BloombergENF 2019; 7 = You and Manthiram 2017; 8 = Fotouhi et al. 2017; 9 = IRENA 2017; 10 = Yang 32 et al., 2020) Battery Type Technology Maturity Life Span Energy Specific Price (USD (Cycles) Density Energy kWh-1) in (Wh L-1) (Wh kg-1) 2017 Lead Acid High 300–800 5 102–106 5 38–60 5 70–160 5 Ni MH High 600–1200 5 220–250 5 42–110 5 210–365 5 Ni Cd High 1350 2 100 2 60 2 700 High-temperature Na High 1000 5 150–280 8 80–120 1 315–490 8 batteries LIB state of the art High 1000–6000 5 200–680 3 110–250 3 176 6 LIB energy-optimized Under Development 600–850 3 300-440 3 Classic Li Metal (CLIM) Under Development 800–1050 3 420–530 3 Metal Sulfur (Li S) Near Commercialization 100–500 5 350–680 3, 8 360–560 3, 36–130 5 8 Metal Sulfur (Na S) Under Development 5000–10,000 8 Metal Air (Li/air) Under Development 20–100 5 470–900 4 70–200 5 Do Not Cite, Quote or Distribute 6-54 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 Metal Air (Zn/air) Under Development 150–450 5 200–410 4 70–160 5 Na ion Under Development 500 7 600 7 All-Solid-State Under Development 278–479 3 Redox Under Development >12,000– 15–2510 10–2010 6610 14,000 10 1 2 Drawbacks of batteries include relatively short lifespans and the use of hazardous or costly materials in 3 some variants. While LIB costs are decreasing (Schmidt et al. 2017; Vartiainen et al. 2020), the risk of 4 thermal runaway, which could ignite a fire (Gur 2018; Wang et al. 2019a), concerns about long-term 5 resource availability (Sun et al. 2017; Olivetti et al. 2017), and concerns about global cradle-to-grave 6 impacts (Peters et al. 2017; Kallitsis et al. 2020) need to be addressed. 7 The superior characteristics of LIBs will keep them the dominant choice for EV and grid applications 8 in the medium-term (high confidence). There are, however, several next-generation battery chemistries 9 (Placke et al. 2017), which show promise (high confidence). Cost reductions through economies of scale 10 are a key area for development. Extending the life of the battery can bring down overall costs and 11 mitigate the environmental impacts (Peters et al. 2017). Understanding and controlling battery 12 degradation is therefore important. The liquid, air-reactive electrolytes of conventional LIBs are the 13 main source of their safety issues (Gur 2018; Janek and Zeier 2016), so All-Solid-State Batteries, in 14 which the electrolyte is a solid, stable material, are being developed. They are expected to be safe, be 15 durable, and have higher energy densities (Janek and Zeier 2016). New chemistries and concepts are 16 being explored, such as lithium-sulfur batteries to achieve even higher energy densities (Van Noorden 17 2014; Blomgren 2017) and sodium chemistries because sodium is more abundant than lithium (Hwang 18 et al. 2017). Cost-effective recycling of batteries will address many sustainability issues and prevent 19 hazardous and wasteful disposal of used batteries (Harper et al. 2019). Post-LIB chemistries include 20 metal sulfur, metal-air, metal ion (besides Li) and All-Solid-State Batteries. 21 Compressed Air Energy Storage (CAES). With CAES, off-peak electricity is used to compress air in a 22 reservoir – either in salt caverns for large scale or in high-pressure tanks for smaller-scale installations. 23 The air is later released to generate electricity. While conventional CAES has used natural gas to power 24 compression, new low carbon CAES technologies, such as isothermal or adiabatic CAES, control 25 thermal losses during compression and expansion (Wang et al. 2017c). Fast responses and higher 26 efficiencies occur in small-scale CAES installations, scalable to suit the application as a distributed 27 energy store, offering a flexible, low maintenance alternative (Luo et al. 2014; Venkataramani et al. 28 2016). 29 CAES is a mature technology in use since the 1970s. Although CAES technologies have been 30 developed, there are not many installations at present (Blanc et al. 2020; Wang et al. 2017b). While the 31 opportunities for CAES are significant, with a global geological storage potential of about 6.5 PW 32 (Aghahosseini and Breyer 2018), a significant amount of initial investment is required. Higher 33 efficiencies and energy densities can be achieved by exploiting the hydrostatic pressure of deep water 34 to compress air within submersible reservoirs (Pimm et al. 2014). CAES is best suited to bulk diurnal 35 electricity storage for buffering VRE sources and services, which do not need a very rapid response. In 36 contrast to PHS, CAES has far more siting options and poses few environmental impacts. 37 Liquid Air Energy Storage (LAES). Liquid air energy storage uses electricity to liquefy air by cooling 38 it to –196°C and storing it in this condensed form (largely liquid nitrogen) in large, insulated tanks. To 39 release electricity, the ‘liquid air’ is evaporated through heating, expanding to drive gas turbines. Low- 40 grade waste heat can be utilized, providing opportunities for integrating with industrial processes to 41 increase system efficiency. There are clear, exploitable synergies with the existing liquid gas 42 infrastructure (Peters and Sievert 2016). Do Not Cite, Quote or Distribute 6-55 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 LAES provides bulk daily storage of electricity, with the additional advantage of being able to capture 2 waste heat from industrial processes. This technology is in the early commercial stage (Regen 2017; 3 Brandon et al. 2015). Advances in whole systems integration can be developed to integrate LAES with 4 industrial processes, making use of their waste heat streams. LAES uniquely removes contaminants in 5 the air and could potentially incorporate CO2 capture (Taylor et al. 2012). 6 Thermal Energy Storage (TES). Thermal energy storage refers to a range of technologies exploiting the 7 ability of materials to absorb and store heat or cold, either within the same phase (sensible TES), through 8 phase changes (latent TES), or through reversible chemical reactions (thermochemical TES). Pumped 9 Thermal Energy Storage (PTES), a hybrid form of TES, is an air-driven electricity storage technology 10 storing both heat and cold in gravel beds, using a reversible heat-pump system to maintain the 11 temperature difference between the two beds and gas compression to generate and transfer heat (Regen 12 2017). TES technologies can store both heat and cold energy for long periods, for example in 13 underground water reservoirs for balancing between seasons (Tian et al. 2019; Dahash et al. 2019), 14 storing heat and cold to balance daily and seasonal temperatures in buildings and reducing heat build- 15 up in applications generating excessive waste heat, such as data centres and underground operations. 16 TES can be much cheaper than batteries and has the unique ability to capture and reuse waste heat and 17 cold, enabling the efficiency of many industrial, buildings, and domestic processes to be greatly 18 improved (high confidence). Integration of TES into energy systems is particularly important, as the 19 global demand for cooling is expected to grow (Peters and Sievert 2016; Elzinga et al. 2014). Sensible 20 TES is well developed and widely used; latent TES is less developed with few applications. 21 Thermochemical TES is the least developed, with no application yet (Prieto et al. 2016; Clark et al. 22 2020). The potential for high-density storage of industrial heat for long periods in thermochemical TES 23 (Brandon et al. 2015) is high, with energy densities comparable to that of batteries (Taylor et al. 2012), 24 but material costs are currently prohibitive, ranging from hundreds to thousands of dollars per tonne. 25 Flywheel Energy Storage (FES). Flywheels are charged by accelerating a rotor/flywheel. Energy is 26 stored in the spinning rotor’s inertia which is only decelerated by friction (minimized by magnetic 27 bearings in a vacuum), or by contact with a mechanical, electric motor. They can reach full charge very 28 rapidly, their state of charge can be easily determined (Amiryar and Pullen 2017), and they operate over 29 a wide range of temperatures. While they are more expensive to install than batteries and 30 supercapacitors, they last a long time and are best suited to stationary grid storage, providing high power 31 for short periods (minutes). Flywheels can be used in vehicles, but not as the primary energy source. 32 Flywheels are a relatively mature storage technology but not widely used, despite their many advantages 33 over electrochemical storage (Dragoni 2017). Conventional flywheels require costly, high tensile 34 strength materials, but high-energy flywheels, using lightweight rotor materials, are being developed 35 (Amiryar and Pullen 2017; Hedlund et al. 2015). 36 Supercapacitors, aka Ultracapacitors or Double Layer Capacitors (Scap). Supercapacitors consist of a 37 porous separator sandwiched between two electrodes, immersed in a liquid electrolyte (Gur 2018). 38 When a voltage is applied across the electrodes, ions in the electrolyte form electric double layers at the 39 electrode surfaces, held by electrostatic forces. This structure forms a capacitor, storing electrical charge 40 (Lin et al. 2017; Brandon et al. 2015) and can operate from –40°C to 65°C. 41 Supercapacitors can supply high peaks of power very rapidly for short periods (seconds up to minutes) 42 and are able to fulfil the grid requirements for frequency regulation, but they would need to be 43 hybridized with batteries for automotive applications. Their commercial status is limited by costly 44 materials and additional power electronics required to stabilize their output (Brandon et al. 2015). 45 Progress in this area includes the development of high energy supercapacitors, LIB-supercapacitor 46 devices (Gonzalez et al. 2016), and cheaper materials (Wang et al. 2017a), all providing the potential Do Not Cite, Quote or Distribute 6-56 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 to improve the economic case for supercapacitors, either by reducing manufacturing costs or extending 2 their service portfolio. 3 Redox Flow Batteries (RFB). Redox flow batteries use two separate electrolyte solutions, usually 4 liquids, but solid or gaseous forms may also be involved, stored in separate tanks, and pumped over or 5 through electrode stacks during charge and discharge, with an ion-conducting membrane separating the 6 liquids. The larger the tank, the greater the energy storage capacity, whereas more and larger cells in 7 the stack increase the power of the flow battery. This decoupling of energy from power enables RFB 8 installations to be uniquely tailored to suit the requirements of any given application. There are two 9 commercially available types today: vanadium and zinc bromide, and both operate at near ambient 10 temperatures, incurring minimal operational costs. 11 RFBs respond rapidly and can perform all the same services as LIBs, except for onboard electricity for 12 EVs. Lower cost chemistries are emerging, to enable cost-effective bulk energy storage (Brandon et al. 13 2015). A new membrane-free design eliminates the need for a separator and also halves the system 14 requirements, as the chemical reactions can coexist in a single electrolyte solution (Navalpotro et al. 15 2017; Arenas et al. 2018). 16 Power to fuels (PtX). (see also Section 6.4.3.1) The process of using electricity to generate a gaseous 17 fuel, such as hydrogen or ammonia, is termed power-to-gas (PtG/P2G) (IEA 2020h). When injected 18 into the existing gas infrastructure (section 6.4.5), it has the added benefit of decarbonizing gas 19 (Brandon et al. 2015). Electricity can be used to generate hydrogen, which is then converted back into 20 electricity using combined-cycle gas turbines that have been converted to run on hydrogen. For greater 21 compatibility with existing gas systems and appliances, the hydrogen can combined with captured 22 carbon dioxide to form methane and other synthetic fuels (Thema et al. 2019), however methane has 23 high global warming potential and its supply chain emissions have been found to be significant 24 (Balcombe et al. 2013). 25 PtX can provide all required grid services, depending on how it is integrated. However, a significant 26 amount of PtX is required for storage to produce electricity again (Bogdanov et al. 2019) due to the low 27 roundtrip efficiency of converting electricity to fuel and back again. However, portable fuels (hydrogen, 28 methane, ammonia, synthetic hydrocarbons) are useful in certain applications, for example in energy 29 systems lacking the potential for renewables, and the high energy density of chemical storage is 30 essential for more demanding applications, such as transporting heavy goods and heating or cooling 31 buildings (IEA 2020h). Research into more efficient and flexible electrolyzers which last longer and 32 cost less is needed (Brandon et al. 2015). 33 Hydrogen and Reversible Hydrogen Fuel Cells (H/RHFC). Hydrogen is a flexible fuel with diverse 34 uses, capable of providing electricity, heat, and long-term energy storage for grids, industry, and 35 transport, and has been widely used industrially for decades (Section 0). Hydrogen can be produced in 36 various ways and stored in significant quantities in geological formations at moderate pressures, often 37 for long periods, providing seasonal storage (Gabrielli et al. 2020). A core and emerging 38 implementation of PtX is hydrogen production through electrolyzers. Hydrogen is a carbon-free fuel 39 holding three times the energy held by an equivalent mass of gasoline but occupying a larger volume. 40 An electrolyzer uses excess electricity to split water into hydrogen and oxygen through the process of 41 electrolysis. A fuel cell performs the reverse process of recombining hydrogen and oxygen back into 42 water, converting chemical energy into electricity (Elzinga et al. 2014). Reversible hydrogen fuel cells 43 (RHFCs) can perform both functions in a single device, however they are still in the pre-commercial 44 stage, due to prohibitive production costs. 45 Hydrogen can play an important role in reducing emissions and has been shown to be the most cost- 46 effective option in some cases, as it builds on existing systems (Staffell et al. 2018). Fuel cell costs need 47 to be reduced and the harmonies between hydrogen and complementary technologies, such as batteries, Do Not Cite, Quote or Distribute 6-57 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 for specific applications need to be explored further. Hydrogen can provide long duration storage to 2 deal with prolonged extreme events, such as very low output of wind generation, to support resilience 3 of future low carbon energy systems. Research in this technology focuses on improving roundtrip 4 efficiencies, which can be as high as 80% with recycled waste heat and in high-pressure electrolyzers, 5 incorporating more efficient compression (Matos et al. 2019). Photo-electrolysis uses solar energy to 6 directly generate hydrogen from water (Amirante et al. 2017). 7 6.4.4.2 Societal Dimensions of Energy Storage 8 Public awareness knowledge about electricity storage technologies, their current state, and their 9 potential role in future energy systems is limited (Jones et al. 2018). For instance, people do not perceive 10 energy system flexibility and storage as a significant issue, or assume storage is already taking place. 11 Public perceptions differ across storage technologies. Hydrogen is considered a modern and clean 12 technology, but people also have safety concerns. Moreover, the public is uncertain about hydrogen 13 storage size and the possibility of storing hydrogen in or near residential areas (Eitan and Fischhendler 14 2021). Battery storage both on the household and community level was perceived as slightly positive 15 in one study in the UK (Ambrosio-Albala et al. 2020). However, financial costs are seen as a main 16 barrier. The potential of electric vehicle batteries to function as flexible storage is limited by the current 17 numbers of EV owners and concerns that one’s car battery might not be fully loaded when needed. 18 6.4.5 Energy Transport and Transmission 19 The linkage between energy supply and distribution, on the one hand, and energy use on the other is 20 facilitated by various mechanisms for transporting energy. As the energy system evolves, the way that 21 energy is transported will also evolve. 22 6.4.5.1 Hydrogen: Low-Carbon Energy Fuel 23 Hydrogen is a promising energy carrier for a decarbonized world (Box 6.9). It can be utilized for 24 electricity, heat, transport, industrial demand, and energy storage (Abdin et al. 2020). In low-carbon 25 energy systems, hydrogen is expected to be utilized in applications that are not as amenable to 26 electrification, such as a fuel for heavy-duty road transport and shipping, or as a chemical feedstock 27 (Griffiths et al. 2021; Schemme et al. 2017). Hydrogen could also provide low-carbon heat for industrial 28 processes or be utilized for direct reduction of iron ore (Vogl et al. 2018). Hydrogen could replace 29 natural gas-based electricity generation (do Sacramento et al. 2013) in certain regions and support the 30 integration of variable renewables into electricity systems by providing a means of long-term electricity 31 storage. Hydrogen-based carriers, such as ammonia and synthetic hydrocarbons, can likewise be used 32 in energy-intensive industries and the transport sector (Schemme et al. 2017; IRENA 2019b) (e.g., 33 synthetic fuels for aviation). These hydrogen-based energy carriers are easier to store than hydrogen. 34 At present hydrogen has limited applications – mainly being produced onsite for the creation of 35 methanol and ammonia (IEA 2019c), as well as in refineries. 36 Low- or zero-carbon produced hydrogen is not currently competitive for large-scale applications, but it 37 is likely to have a significant role in future energy systems, due to its wide-range of applications (high 38 confidence). Key challenges for hydrogen are: (a) cost-effective low/zero carbon production, (b) 39 delivery infrastructure cost, (c) land area (i.e., ‘footprint’) requirements of hydrogen pipelines, 40 compressor stations, and other infrastructure, (d) challenges in using existing pipeline infrastructure, 41 (e) maintaining hydrogen purity, (e) minimizing hydrogen leakage, and (f) the cost and performance of 42 end-uses. Furthermore, it is necessary to consider the public perception and social acceptance of 43 hydrogen technologies and their related infrastructure requirements (Scott and Powells 2020; Iribarren 44 et al. 2016) 45 Hydrogen Production. Low- or zero-carbon hydrogen can be produced from multiple sources. While 46 there is no consensus on the hydrogen production spectrum, “blue” hydrogen (Goldmann and Do Not Cite, Quote or Distribute 6-58 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 Dinkelacker 2018) generally refers to hydrogen produced from natural gas combined with CCS through 2 processes such as steam methane reforming (SMR)(Sanusi and Mokheimer 2019) and advanced gas 3 reforming (Zhou et al. 2020). Low-carbon hydrogen could also be produced from coal coupled with 4 CCS (Hu et al. 2020) (Table 6.7). Current estimates are that adding CCS to produce hydrogen from 5 SMR will add on average 50% on the capital cost, 10% to fuel, and 100% to operating costs. For coal 6 gasification, CCS will add 5% to the capital and fuel costs and 130% to operating costs (IEA 2019d; 7 Staffell et al. 2018). Further, biomass gasification could produce renewable hydrogen, and when joined 8 with CCS could provide negative carbon emissions. “Green” hydrogen (Jaszczur et al. 2016) most often 9 is referred to as hydrogen produced from zero-carbon electricity sources such as solar power and wind 10 power (Schmidt et al. 2017) (Table 6.8). Nuclear power could also provide clean hydrogen, via 11 electrolysis or thermochemical water splitting (EERE 2020). Hydrogen can even be produced pyrolysis 12 of methane (Sánchez-Bastardo et al. 2020), sometimes called as “turquoise” hydrogen, solar 13 thermochemical water splitting, biological hydrogen production (cyanobacteria) (Velazquez Abad and 14 Dodds 2017), and microbes that use light to make hydrogen (under research)(EIA 2020). 15 16 Table 6.7 Key performance and cost characteristics of different non-electric hydrogen production 17 technologies (including CCS) 18 (1) CSIRO 2021; (2) IEA 2020; (3) IRENA 2019; (4) Hydrogen Council 2020; (5) CCC 2018; (6) BEIS 2021; (7) Ishaq et al. 2021; (8) Al-Mahtani et al. 19 2021; (9) IEA 2019 Technology LHV Efficiency (%) Carbon Intensity Cost Estimates* (USD (kgCO2 (kgH2)-1) (kgH2)-1) Current Long-term Current Long-term SMR 65(5) 74(5,6) 1.0–3.6(5,9) 1.0– 1.5–2.6(5) (1,2,3,4,5) 2.7 Advanced gas reforming - 81–84(5,6) 0.9–2.9(5) 1.3–2.1(5) 1.2–3.4(5,6) Hydrogen from coal 54(5) 54(5) 2.1–5.5(5,9) 1.8– 2.4–3.3(5) (1,2,3,4,5) gasification 3.1 Hydrogen from biomass 53.6(7) 40–60(5) Potential to 4.9(5) 2.9–5.9(5,6) gasification achieve- Negative emission(5,8) 20 *USD per GBP exchange rate: 0.72 (August 2021); LHV: Lower Heating Values; Long-term refers to 2040 and 2050 according to different 21 references 22 Table 6.8 Efficiency and cost characteristics of electrolysis technologies for hydrogen production 23 (1) CSIRO 2021; (2) IEA 2020; (3) IRENA 2019; (4) Hydrogen Council 2020; (5) CCC 2018; (6) BEIS 2021; (7) IEA 2019; (8) Christensen 2020 Technology LHV Efficiency (%) CAPEX (USD kWe-1) Cost Estimates*,+ (USD (kgH2)-1) Current Long-term Current (7) Long- Current Long- (2,5,6,8) term (7) term Alkaline Electrolysers 58–77(1,2,5,6,8) 70–82 500–1400 200–700 2.3–6.9(1,2,3,5) 0.9– 3.9(3,5) PEM 54–72(1,2,5,6,8) 67–82 1100– 200–900 3.5–9.3(1,4,5,6) 2.2– 1800 7.2(5,6) SOEC 74–81(2,6,8) 77–92 2800– 500– 4.2 (5) 2.6–3.6(5) 5600 1000 24 *USD per GBP exchange rate: 0.72 (August 2021); + The cost of hydrogen production from electrolysers is highly dependent on the 25 technology, source of electricity, and operating hours, and here some values based on the assumptions made in the references are provided. 26 Hydrogen energy carriers. Hydrogen can be both an energy carrier itself, be converted further for into 27 other energy carriers (such as synthetic fuels) and be a means of transporting other sources of energy. 28 For example, hydrogen could be transported in its native gaseous form or liquified. Hydrogen can also Do Not Cite, Quote or Distribute 6-59 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 be combined with carbon and transported as a synthetic hydrocarbons (Gumber and Gurumoorthy 2018) 2 (IRENA 2019d) as well as be transported via liquid organic hydrogen carriers (LOHCs) or ammonia 3 (IRENA 2019d). For synthetic hydrocarbons such as methane or methanol to be considered zero carbon, 4 the CO2 used to produce them would need to come from the atmosphere either directly through DACCS 5 or indirectly through BECCS (IRENA 2019b). LOHCs are organic substances in liquid or semi-solid 6 states, which store hydrogen based on reversible catalytic hydrogenation and de-hydrogenation of 7 carbon double bounds (Rao and Yoon 2020; Niermann et al. 2019). Hydrogen produced from 8 electrolysis could also be seen as an electricity energy carrier. This is an example of the PtX processes 9 (section 6.4.4), entailing the conversion of electricity to other energy carriers for subsequent use. 10 Ammonia is a promising cost-effective hydrogen carrier (Creutzig et al. 2019). Onsite generation of 11 hydrogen for the production of ammonia already occurs today, and the NH3 could be subsequently 12 “cracked” (with a 15–25% energy loss) to reproduce hydrogen (Bell and Torrente-Murciano 2016; 13 Hansgen et al. 2010; Montoya et al. 2015). Because the energy density of ammonia is 38% higher than 14 liquid hydrogen (Osman and Sgouridis 2018), it is potentially a suitable energy carrier for long-distance 15 transport and storage (Salmon et al. 2021) Moreover, ammonia is more easily condensable (liquefied at 16 0.8 MPa, 20°C), which provides economically viable hydrogen storage and supply systems. Ammonia 17 production and transport are also established industrial processes (∼180 MMT yr-1 (Valera-Medina et 18 al. 2017), and hence ammonia is considered to be a scalable and cost-effective hydrogen-based energy 19 carrier. At present, most ammonia is used in fertilizers (~80%), followed by many industrial processes, 20 such as the manufacturing of mining explosives and petrochemicals (Jiao and Xu 2018). In contrast to 21 hydrogen, ammonia can be used directly as a fuel without any phase change for internal combustion 22 engines, gas turbines, and industrial furnaces (Kobayashi et al. 2019). Ammonia can also be used in 23 low and high temperature fuel cells (Lan and Tao 2014), whereby both electricity and hydrogen can be 24 produced without any NOx emissions. Furthermore, ammonia provides the flexibility to be 25 dehydrogenated for hydrogen-use purposes. Ammonia is considered a carbon-free sustainable fuel for 26 electricity generation, since in a complete combustion, only water and nitrogen are produced (Valera- 27 Medina et al. 2017). Like hydrogen, ammonia could facilitate management of variable RES, due to its 28 cost-effective grid-scale energy storage capabilities. In this regard, production of ammonia via hydrogen 29 from low- or zero-carbon generation technologies along with ammonia energy recovery technologies 30 (Afif et al. 2016) could play a major role in forming a hydrogen and/or ammonia economy to support 31 decarbonization. However, there are serious concerns regarding the ability to safely use ammonia for 32 all these purposes, given its toxicity - whereas hydrogen is not considered toxic. 33 In general, challenges around hydrogen-based energy carriers - including safety issues around 34 flammability, toxicity, storage, and consumption - require new devices and techniques to facilitate their 35 large-scale use. Relatively high capital costs and large electricity requirements are also challenges for 36 technologies that produce hydrogen energy carriers. Yet, these energy carriers could become 37 economically viable through the availability of low-cost electricity generation and excess of renewable 38 energy production (Daiyan et al. 2020) A key challenge in use of ammonia is related to significant 39 amount of NOx emissions, which is released from nitrogen and oxygen combustion, and unburned 40 ammonia. Both have substantial air pollution risks, which can result in lung and other injuries, and can 41 reduce visibility (EPA 2001). Due to the low flammability of hydrogen energy carriers such as liquified 42 hydrogen (Nilsson et al. 2016) and ammonia (Li et al. 2018), a stable combustion (Zengel et al. 2020; 43 Lamas and Rodriguez 2019) in the existing gas turbines is not currently feasible. In recent 44 developments, however, the proportion of hydrogen in gas turbines has been successfully increased, 45 and further development of gas turbines may enable them to operate on 100% hydrogen by 2030 (Pflug 46 et al. 2019) 47 Long-Distance Hydrogen Transport. Hydrogen can allow regional integration and better utilization of 48 low- or zero-carbon energy sources (Box 6.9 and Box 6.10). Hydrogen produced from renewables or Do Not Cite, Quote or Distribute 6-60 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 other low-carbon sources in one location could be transported for use elsewhere (Philibert 2017; Ameli 2 et al. 2020). Depending on the distance to the user and specific energy carrier utilized (e.g., gaseous 3 hydrogen or LOHC), various hydrogen transport infrastructures, distribution systems, and storage 4 facilities would be required (Hansen 2020; Schönauer and Glanz 2021) (Figure 6.17). 5 Hydrogen can be liquefied and transported at volume over the ocean without pressurization. This 6 requires a temperature of –253ºC and is therefore energy-intensive and costly (Niermann et al. 2021). 7 Once it reaches its destination, the hydrogen needs to be re-gasified, adding further cost. A 8 demonstration project is under development exporting liquid hydrogen from Australia to Japan 9 (Yamashita et al. 2019). Hydrogen could also be transported as ammonia by ocean in liquid form. 10 Ammonia is advantageous because it is easier to store than hydrogen (Zamfirescu and Dincer 2008; 11 Nam et al. 2018; Soloveichik 2016). Liquid ammonia requires temperatures below –33ºC and is 12 therefore more straightforward and less costly to transport than liquified hydrogen and even liquified 13 natural gas (Singh and Sahu 2018). A project exporting ammonia from Saudi Arabia to Japan is under 14 consideration (Nagashima 2018). LOHCs could also be used to transport hydrogen at ambient 15 temperature and pressure. This advantageous property of LOHCs makes them similar to oil products, 16 meaning they can be transported in existing oil infrastructure including oil tankers and tanks (Niermann 17 et al. 2019; IEA 2019). A project is under development to export hydrogen from Brunei to Japan using 18 LOHCs (Kurosaki 2018). 19 20 Figure 6.17 Hydrogen value chain. Hydrogen can be produced by various means and input and fuel 21 sources. These processes have different emissions implications. Hydrogen can be transported by various 22 means and in various forms, and it can be stored in bulk for longer-term use. It also has multiple 23 potential end uses. CHP: Combined heat and power 24 Intra-Regional Hydrogen Transportation. Within a country or region, hydrogen would likely be 25 pressurized and delivered as compressed gas. About three times as much compressed hydrogen by 26 volume is required to supply the same amount of energy as natural gas. Security of supply is therefore 27 more challenging in hydrogen networks than in natural gas networks. Storing hydrogen in pipelines 28 (linepack) would be important to maintaining security of supply (Ameli et al. 2019, 2017). Due to the 29 physics of hydrogen, in most cases exiting gas infrastructure would need to be upgraded to transport 30 hydrogen. Transporting hydrogen in medium- or high-pressure networks most often would require 31 reinforcements in compressor stations and pipeline construction routes (Dohi et al. 2016). There are 32 several recent examples of efforts to transport hydrogen by pipeline. For example, in the Iron Mains 33 Replacement Programme in the UK, the existing low pressure gas distribution pipes are being converted Do Not Cite, Quote or Distribute 6-61 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 from iron to plastic (Committee on Climate Change 2018). In the Netherlands, an existing low-pressure 2 12 km natural gas pipeline has been used for transporting hydrogen (Dohi et al. 2016). 3 To bypass gas infrastructure in transporting hydrogen, methane can be transported using the existing 4 gas infrastructure, while hydrogen can be produced close to the demand centres. This approach will 5 only make sense if the methane is produced in a manner that captures carbon from the atmosphere 6 and/or if CCS is used when the methane is used to produce hydrogen. 7 Bulk Hydrogen Storage. Currently, hydrogen is stored in bulk in chemical processes such as metal and 8 chemical hydrides as well as in geologic caverns (Andersson and Grönkvist 2019; Caglayan et al. 2019) 9 (e.g., salt caverns operate in Sweden) (Elberry et al. 2021). There are still many challenges, however, 10 due to salt or hard rock geologies, large size, and minimum pressure requirements of the sites (IEA 11 2019c). Consequently, alternative carbon-free energy carriers, which store hydrogen, may become more 12 attractive (Kobayashi et al. 2019; Lan et al. 2012). 13 6.4.5.2 Electricity Transmission 14 Given the significant geographical variations in the efficiency of renewable resources across different 15 regions and continents, electricity transmission could facilitate cost effective deployment of renewable 16 generation, enhance resilience and security of supply, and increase operational efficiency (high 17 confidence). The diurnal and seasonal characteristics of different renewable energy sources such as 18 wind, solar, and hydropower can vary significantly by location. Through enhanced electricity 19 transmission infrastructure, more wind turbines can be deployed in areas with high wind potential and 20 more solar panels in areas with larger solar irradiation. Increases in electricity transmission and trade 21 can also enhance operational efficiency and reduce or defer the need for investment in peaking plants, 22 storage, or other load management techniques needed to meet security of supply requirements 23 associated with localized use of VRE sources. Increased interconnectivity of large-scale grids also 24 allows the aggregation of ‘smart grid’ solutions such as flexible heating and cooling devices for flexible 25 demand in industrial, commercial, and domestic sectors (Hakimi et al. 2020) and EVs (Li et al. 2021; 26 Muratori and Mai 2020). In general, interconnection is more cost-optimal for countries that are 27 geographically close to each other and can benefit from the diversity of their energy mixes and usage 28 (Schlachtberger et al. 2017). Such developments are not without price, however, and amongst other 29 concerns, raise issues surrounding land use, public acceptance, and resource acquisition for materials 30 necessary for renewable developments (Vakulchuk et al. 2020; Capellán-Pérez et al. 2017). 31 A number of studies have demonstrated the cost benefits of interconnected grids in a range of 32 geographical settings, including across the United States (Bloom et al. 2020), across Europe (2020; 33 Newbery et al. 2013; Cluet et al. 2020), between Australia and parts of Asia (Halawa et al. 2018), and 34 broader global regions, for example between the Middle East and Europe or North Africa and Europe 35 (Tsoutsos et al. 2015). While there is growing interest in interconnection among different regions or 36 continents, a broad range of geopolitical and socio-techno-economic challenges would need to be 37 overcome to support this level of international co-operation and large-scale network expansion (Bertsch 38 et al. 2017; Palle 2021). 39 Status of electricity transmission technology. Long-distance electricity transmission technologies are 40 already available. High voltage alternating current (HVAC), high-voltage direct current (HVDC), and 41 ultra HVDC (UHVDC) technologies are well-established and widely used for bulk electricity 42 transmission (Alassi et al. 2019). HVDC is used with underground cables or long-distance overhead 43 lines (typically voltages between 100–800 kV (Alassi et al. 2019) where HVAC is infeasible or not 44 economic. A ~USD 17 bn project development agreement was signed in January 2021 that would 45 connect 10 GW of PVs in the north of Australia via a 4500 km 3 GW HVDC cable to Singapore, 46 suggesting that this would be cost effective (Sun Cable 2021). In September 2019, the Changji-Guquan 47 ±1,100 kV ultra-high voltage direct current (UHVDC) transmission project built by State Grid Do Not Cite, Quote or Distribute 6-62 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 Corporation of China was officially completed and put into operation. The transmission line is able to 2 transmit up to 12 GW over 3341 km (Pei et al. 2020). This is the UHVDC transmission project with the 3 highest voltage level, the largest transmission capacity, and the longest transmission distance in the 4 world (Liu 2015). 5 Other technologies that could expand the size of transmission corridors and/or improve the operational 6 characteristics include low-frequency AC transmission (LFAC) (Xiang et al. 2021; Tang et al. 2021b) 7 and half-wave AC transmission (HWACT) (Song et al. 2018; Xu et al. 2019). LFAC is technically 8 feasible, but the circumstances in which it is the best economic choice compared to HVDC or HVAC 9 still needs to be established (Xiang et al. 2016). HWACT is restricted to very long distances, and it has 10 not been demonstrated in practice, so its feasibility is unproven. There are still a number of 11 technological challenges for long-distance transmission networks such as protection systems for DC or 12 hybrid AC-DC networks (Franck C. et al. 2017; Chaffey 2016), improvement in cabling technology, 13 and including the use of superconductors and nanocomposites (Ballarino et al. 2016; Doukas 2019), 14 which require advanced solutions. 15 Challenges, barriers, and recommendations. The main challenge to inter-regional transmission is the 16 absence of appropriate market designs and regulatory and policy frameworks. In addition, there are 17 commercial barriers for further enhancement of cross-border transmission. The differing impacts of 18 cross-border interconnections on costs and revenues for generation companies in different regions could 19 delay the development of these interconnectors. It is not yet clear how the investment cost of 20 interconnections should be allocated and recovered, although there is growing support for allocating 21 costs in accordance with the benefits delivered to the market participants. Increased cross-border 22 interconnection may also require new business models which provide incentives for investment and 23 efficient operation, manage risks and uncertainties, and facilitate coordinated planning and governance 24 (Poudineh and Rubino 2017). 25 Optimizing the design and operation of the interconnected transmission system, both onshore and 26 offshore grids, also requires more integrated economic and reliability approaches (Moreno et al. 2012) 27 to ensure the optimal balance between the economics and the provision of system security while 28 maximizing the benefits of smart network technologies. 29 A wide range of factors, including generation profiles, demand profiles circuit losses, reliability 30 characteristics, and maintenance, as well as the uncertainties around them will need to be considered in 31 designing and operating long-distance transmission systems if they are to be widely deployed (De Sa 32 and Al Zubaidy 2011; Du 2009; Djapic et al. 2008; E3G 2021). Public support for extending 33 transmission systems will also be crucial, and studies indicate that such support is frequently low 34 (Perlaviciute et al. 2018; Vince 2010). 35 6.4.6 Demand Side Mitigation Options from an Energy Systems Perspective 36 Demand-side measures are fundamental to an integrated approach to low carbon energy systems (high 37 confidence). Mitigation options, such as wind parks, CCS, and nuclear power plants, may not be 38 implemented when actors oppose these options. Further, end users, including consumers, governments, 39 businesses and industry, would need to adopt the relevant options, and then use these as intended; user 40 adoption can be a key driver to scale up markets for low carbon technologies. This section discusses 41 which factors shape the likelihood that end users engage in relevant mitigation actions, focusing on 42 consumers; strategies to promote mitigation actions are discussed in Section 6.7.6.1. 43 A wide range of actions of end users would reduce carbon emissions in energy systems (Abrahamse et 44 al. 2007; Dietz 2013; Creutzig et al. 2018; Hackmann et al. 2014; Grubler et al. 2018), including: 45 • use of low carbon energy sources and carriers. Actors can produce and use their own renewable 46 energy (e.g., install solar PV, solar water heaters, heat pumps), buy shares in a renewable energy 47 project (e.g., wind shares), or select a renewable energy provider. Do Not Cite, Quote or Distribute 6-63 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 • adoption of technologies that support flexibility in energy use and sector coupling, thereby 2 providing flexibility services by balancing demand and renewable energy supply. This would 3 reduce the need to use fossil fuels to meet demand when renewable energy production is low and 4 put less pressure on deployment of low-emission energy supply systems. Examples are technologies 5 to store energy (e.g., batteries and electric vehicles) or that automatically shift appliances on or off 6 (e.g., fridges, washing machines). 7 • adoption of energy-efficient appliances and systems and increase of resource efficiency of end uses 8 so that less energy is required to provide the same service. Examples are insulating buildings, and 9 passive or energy positive buildings. 10 • change behaviour to reduce overall energy demand or to match energy demand to available energy 11 supplies. Examples include adjusting indoor temperature settings, reducing showering time, 12 reducing car use or flying, and operating appliances when renewable energy production is high. 13 • purchase and use products and services that are associated with low GHG emissions during their 14 production (e.g., reduce dairy and meat consumption) or for transporting products (e.g., local 15 products). Also, end users can engage in behaviour supporting a circular economy, by reducing 16 waste (e.g., of food), sharing products (e.g., cars, equipment), and refurbishing products (e.g., repair 17 rather than buying new products) so that less new products are used. 18 Various factors shape whether such mitigation actions are feasible and considered by end users, 19 including contextual factors, individual abilities, and motivational factors. Mitigation actions can be 20 facilitated and encouraged by targeting relevant barriers and enablers (section 6.7.6.2). 21 Contextual factors, such as physical and climate conditions, infrastructure, available technology, 22 regulations, institutions, culture, and financial conditions define the costs and benefits of mitigation 23 options that enable or inhibit their adoption (high confidence). Geographic location and climate factors 24 may make some technologies, such as solar PV or solar water heaters, impractical (Chang et al. 2009). 25 Culture can inhibit efficient use of home heating or PV (Sovacool and Griffiths 2020), low carbon diets 26 (Dubois et al. 2019), and advanced fuel choices (Van Der Kroon et al. 2013). Also, favourable financial 27 conditions promote the uptake of PV (Wolske and Stern 2018), good facilities increase recycling 28 (Geiger et al. 2019), and vegetarian meal sales increase when more vegetarian options are offered.. 29 Mitigation actions are more likely when individuals feel capable to adopt them (Pisano and Lubell 2017; 30 Geiger et al. 2019), which may depend on income and knowledge. Low-income groups may lack 31 resources to invest in refurbishments and energy-efficient technology with high upfront costs (Andrews- 32 Speed and Ma 2016; Chang et al. 2009; Wolske and Stern 2018). Yet, higher income groups can afford 33 more carbon-intensive lifestyles (Golley and Meng 2012; Namazkhan et al. 2019; Frederiks et al. 2015; 34 Santillán Vera and de la Vega Navarro 2019; Mi et al. 2020; Wiedenhofer et al. 2017). Knowledge of 35 the causes and consequences of climate change and of ways to reduce GHG emissions is not always 36 accurate, but lack of knowledge is not a main barrier of mitigation actions (Boudet 2019). 37 Motivation to engage in mitigation action, reflecting individuals’ reasons for actions, depends on 38 general goals that people strive for in their life (i.e., values). People who strongly value protecting the 39 environment and other people are more likely to consider climate impacts and to engage in a wide range 40 of mitigation actions than those who strongly value individual consequences of actions, such as pleasure 41 and money (Taylor et al. 2014; Steg 2016). Values affect which types of costs and benefits people 42 consider and prioritize when making choices, including individual, affective, social, and environmental 43 costs and benefits (Gowdy 2008; Steg 2016). 44 First, people are more likely to engage in mitigation behaviour (i.e., energy savings, energy efficiency, 45 resource efficiency in buildings, low-carbon energy generation) when they believe such behaviour has 46 more individual benefits than costs (Harland et al. 1999; Steg and Vlek 2009; Kastner and Matthies 47 2016; Kastner and Stern 2015; Kardooni et al. 2016; Wolske et al. 2017; Korcaj et al. 2015), including 48 financial benefits, convenience, comfort, autonomy, and independence in energy supply (Wolske and Do Not Cite, Quote or Distribute 6-64 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 Stern 2018). Yet, financial consequences seem less important for decisions to invest in energy- 2 efficiency and renewable energy production than people indicate (Zhao et al. 2012). 3 Second, people are less likely to engage in mitigation behaviours that are unpleasurable or inconvenient 4 (Steg 2016), and more likely to do so when they expect to derive positive feelings from such actions 5 (Smith et al. 1994; Pelletier et al. 1998; Steg 2005; Carrus et al. 2008; Brosch et al. 2014; Taufik et al. 6 2016). Positive feelings may be elicited when behaviour is pleasurable, but also when it is perceived as 7 meaningful (Bolderdijk et al. 2013; Taufik et al. 2015). 8 Third, social costs and benefits can affect climate action (Farrow et al. 2017), although people do not 9 always recognize this (Nolan et al. 2008; Noppers et al. 2014). People engage more in mitigation actions 10 when they think others expect them to do so and when others act as well (Rai et al. 2016; Harland et al. 11 1999; Nolan et al. 2008). Being part of a group that advocates mitigation actions encourages such 12 actions (Biddau et al. 2016; Fielding and Hornsey 2016; Jans et al. 2018). Talking with peers can reduce 13 uncertainties and confirm benefits about adoption of renewable energy technology (Palm 2017), and 14 peers can provide social support (Wolske et al. 2017). People may engage in mitigation actions when 15 they think this would signal something positive about them (Griskevicius et al. 2010; Milinski et al. 16 2006; Kastner and Stern 2015; Noppers et al. 2014). Social influence can also originate from political 17 and business leaders (Bouman and Steg 2019); GHG emissions are lower when legislators have strong 18 environmental records (Jensen and Spoon 2011; Dietz et al. 2015). 19 Fourth, mitigation actions, including saving energy and hot water, limiting meat consumption, and 20 investing in energy efficiency, resource efficiency in buildings, and renewable energy generation are 21 more likely when people more strongly care about others and the environment (Van Der Werff and Steg 22 2015; Steg et al. 2015; Wolske et al. 2017). People across the world generally strongly value the 23 environment (Bouman and Steg 2019; Steg 2016), suggesting that they are motivated to mitigate climate 24 change. The more individuals are aware of the climate impact of their behaviour, the more they think 25 their actions can help reduce such impacts, which strengthens their moral norms to act accordingly, and 26 promotes mitigation actions (Steg and de Groot 2010; Jakovcevic and Steg 2013; Chen 2015; Wolske 27 et al. 2017). 28 Initial mitigation actions can encourage engagement in other mitigation actions when people experience 29 that such actions are easy and effective (Lauren et al. 2016), and when initial actions make them realize 30 they are a pro-environmental person, motivating them to engage in more mitigation actions so as to be 31 consistent (van der Werff et al. 2014; Lacasse 2015, 2016; Peters et al. 2018). This implies it would be 32 important to create conditions that make it likely that initial mitigation actions motivate further actions. 33 6.4.7 Summary of Mitigation Options 34 Designing feasible, desirable, and cost-effective energy sector mitigation strategies requires comparison 35 between the different mitigation options. One such metric is the cost of delivering one unit of energy, 36 for example, the levelized cost, or USD MWh-1, of electricity produced from different sources. LCOEs 37 are useful because they normalize the costs per unit of service provided. While useful in characterizing 38 options in broad strokes, it is important to acknowledge and understand several caveats associated with 39 these metrics, particularly when applied globally. They may be constructed with different discount 40 rates; they require information on energy input costs for options that require energy inputs (e.g., fossil 41 electricity generation, biofuels); they depend on local resource availability, for example solar insolation 42 for solar power, wind classes for wind power, and rainfall and streamflow for hydropower; and actual 43 implementation costs may include additional elements, for example, the costs of managing electricity 44 grids heavily dependent on VRE electricity sources. These complicating factors vary across regions, 45 some depend strongly on the policy environment in which mitigation options are deployed, and some 46 depend on how technologies are constructed and operated. Do Not Cite, Quote or Distribute 6-65 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 The literature provides multiple LCOE estimates for mitigation options today and in the future (see 2 Table 6.9 for electricity generation options). LCOE ranges for low- and zero-carbon electricity 3 technologies overlap with LCOE’s of fossil generation without CCS. For example, LCOEs for utility 4 solar and wind today and in the future overlap with those of new coal and gas without CCS (Figure 5 6.18, NREL 2021; Lazard, 2020; IEA WEO 2020, IEA WEO 2020). Some of the overlap stems from 6 differences in assumptions or regional conditions that apply to all technologies (e.g., variations in 7 assumed discount rates), but the overlap also reflects the fact that low- and zero-carbon electricity 8 generation options are, and will be, less expensive than emitting options in many regions. Future cost 9 projections also illustrate that several technologies are anticipated to experience further cost declines 10 over the coming decades, reinforcing the increasingly competitiveness of low- and zero-carbon 11 electricity. For example, IEA’s LCOEs estimates for offshore wind halve between 2020 and 2040 in 40 12 several regions (IEA WEO 2020). Figure with new IEA & Lazard values : 35 2020 USD / kWh 0.30 30 2020 Cents/ kWh 0.25 25 0.20 20 0.15 15 0.10 10 0.05 5 0 0 >2020 to 2040 >2020 to 2040 >2020 to 2040 >2020 to 2040 >2020 to 2040 >2020 to 2040 >2020 to 2040 >2020 to 2040 >2020 to 2040 >2020 to 2040 >2020 to 2040 >2020 to 2040 >2020 to 2040 >2020 to 2040 circa 2020 circa 2020 circa 2020 circa 2020 circa 2020 circa 2020 circa 2020 circa 2020 circa 2020 circa 2020 circa 2020 circa 2020 circa 2020 circa 2020 Bio−electricity with CCS Geothermal−electricity Wind − On−shore Wind − Off−shore Solar PV − Other Solar PV − Utility NGCC with CCS Coal with CCS Bio−electricity Natural gas Nuclear Hydro Coal CSP Authors EIA IEA IRENA NREL Other Region Global North America Europe Asia South America Fossil fuel LCOE range in circa 2020 13 14 Figure 6.18 Range of LCOEs (in USD cents kWh-1) from recent studies for different electricity generating 15 technologies circa 2020 and in the future between 2020-2040. LCOEs are primarily taken from recent 16 studies, because the costs of some technologies are changing rapidly. To make the figure more tractable 17 across the studies, we highlight the data from IEA WEO 2020 STEPS scenario in red (EIA, 2020), the EIA 18 AEO 2021 in blue (EIA, 2021), NREL ATB 2021 in green, (NREL, 2021), and IRENA Renewable Power 19 Generation Costs in 2020 in yellow (IRENA, 2021). All other studies are shown in light grey markers. 20 Marker shapes identify the regions included in the studies. Studies that included several regions are labelled 21 as global. Only sources that provided LCOEs are included. Ranges for studies frequently reflect variations 22 among regional estimates. Studies that are shown as a mid-point and a solid line represent studies that 23 reported either a median or an average, and that had either a confidence interval or a minimum and a 24 maximum reported. Dashed lines with markers at the end represent the range of values reported in studies 25 that had several point estimates for either different regions or used different assumptions. All estimates 26 were converted to 2020 USD. The publication year was used if no USD year was provided. Some studies 27 included transmissions costs, and some the CCS studies included storage and sequestration costs, while 28 others did not. Vertical axis is capped at USD2020 0.30 kWh-1, but some estimates for hydro, geothermal, 29 natural gas and bioelectricity were higher than 0.30. The grey horizontal band denotes the range of fossil 30 fuel electricity LCOEs in circa 2020. 31 A more direct metric of mitigation options is the cost to reduce one tonne of CO2 or equivalent GHGs, 32 or USD tCO2-eq-1 avoided. In addition to the comparison challenges noted above, this metric must 33 account for the costs and emissions of the emitting options that is being displaced by the low-carbon 34 option. Assumptions about the displaced option can lead to very different mitigation cost estimates Do Not Cite, Quote or Distribute 6-66 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 (Table 6.9). Despite these challenges, these metrics are useful for identifying broad trends and making 2 broad comparisons, even from the global perspective in this assessment. But local information will 3 always be critical to determine which options are most cost-effective in any specific applications. 4 5 Table 6.9 Examples of cost of mitigation for selected electricity options. Results represent variations in 6 mitigation options and displaced fossil generation. LCOEs are illustrative, but consistent with recent 7 estimates. Negative values mean that the mitigation option is cheaper than the displaced option, 8 irrespective of emissions benefits. Baseline New New coal Existing coal Existing NGCC NGCC Baseline emissions rate (tonCO2 MWh- 0.8 0.9 0.34 0.42 1) LCOE (USD2020 0.065 0.041 0.044 0.028 kWh-1) Utility scale solar PV 44 USD tCO2- 66 USD tCO2- 165 USD tCO2- 171 USD tCO2- 0.100 (poor resource site) eq-1 eq-1 eq-1 eq-1 Utility scale solar PV –38 USD tCO2- –7 USD tCO2- –26 USD tCO2- 17 USD tCO2- 0.035 (good resource site) eq-1 eq-1 eq-1 eq-1 9 10 The feasibility and desirability of mitigation options extends well beyond the market economic costs of 11 installation and operation (Section 6.4.1). Figure 6.19 summarizes the barriers and enablers for 12 implementing different mitigation options in energy systems. The feasibility of different options can be 13 enhanced by removing barriers and/or strengthening enablers of the implementation of the options. The 14 feasibility of options may differ across context (e.g., region), time (e.g., 2030 versus 2050), scale (e.g., 15 small versus large) and the long-term warming goal (e.g., 1.5°C versus 2°C). 16 17 Do Not Cite, Quote or Distribute 6-67 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 Figure 6.19 Summary of the extent to which different factors would enable or inhibit the deployment of mitigation options in energy systems. Blue bars indicate the 2 extent to which the indicator enables the implementation of the option (E) and orange bars indicate the extent to which an indicator is a barrier (B) to the 3 deployment of the option, relative to the maximum possible barriers and enablers assessed. An X signifies the indicator is not applicable or does not affect the 4 feasibility of the option, while a forward slash indicates that there is no or limited evidence whether the indicator affects the feasibility of the option. The shading 5 indicates the level of confidence, with darker shading signifying higher levels of confidence. Appendix II provides an overview of the factors affecting the feasibility 6 of options and how they differ across context (e.g., region), time (e.g., 2030 versus 2050), and scale (e.g., small versus large), and includes a line of sight on which the 7 assessment is based. The assessment method is explained in Annex II.11. 8 Do Not Cite, Quote or Distribute 6-68 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 6.5 Climate Change Impacts on the Energy System 2 6.5.1 Climate Impacts on the Energy System 3 Many components of the energy system are affected by individual weather events and climate 4 conditions (Table 6.10). In addition, a range of compounding effects can be anticipated, as the complex, 5 interconnected climate and energy system are influenced by multiple weather and climate conditions. 6 This raises the question of whether the energy system transformation needed to limit warming will be 7 impacted by climate change. 8 Do Not Cite, Quote or Distribute 6-69 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 Table 6.10 Relevance of the key climatic impact-drivers (and their respective changes in intensity, frequency, duration, timing, and spatial extent) for major 2 categories of activities in the energy sector. The climate impact-drivers (CIDs) are identified in AR6/GWI/Chapter 12 (ref). The relevance is assessed as: 3 positive/negative (+ or –), or both (±). D&O: Design and Operation, CF: Capacity Factor. Climate Impact Driver Heat and cold Wet and dry Wind Snow and ice Coastal Oceanic Other Heavy precipitation and pluvial flood Agricultural and ecological drought Heavy snowfall and ice storm Snow, glacier and ice sheet Atmospheric CO2 at surface Mean ocean temperature Lake, river and sea ice Mean air temperature Hydrological drought Sand and dust storm Air pollution weather Radiation at surface Severe wind storm Mean precipitation Mean wind speed Relative sea level Marine heatwave Dissolved oxygen Tropical cyclone Snow avalanche Coastal erosion Ocean salinity Extreme heat Ocean acidity Coastal flood Fire weather Permafrost River flood Cold spell Landslide Aridity Frost Hail Energy sector Energy activity Resources (dammed) + + – – – ± – D&O (dammed) ± – – Hydropower Resources (undammed) + + + – – D&O (undammed) ± – ± – – Capacity factors – – + – – Wind power D&O (onshore) – – – – – – – – D&O (offshore) – – – – CF (PV) – – – + Solar power CF (CSP) – – + D&O _ – _ – Ocean energy Resources + ± + – ± ± – ± Bio-energy Resources ± – ± – – – + Thermal power plants Efficiency ± – – (incl nuclear) Vulnerability – – – – – – – – – – – CCS Efficiency ± – – – Heating + – – + Energy consumption Cooling – – ± – Electric power D&O – – – transmission system Vulnerability – – – – – – 4 Do Not Cite, Quote or Distribute 6-70 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 The impacts of climate change on the energy system can be divided into three areas: impacts on the 2 energy supply, impacts on energy consumption, and impacts on energy infrastructure. The rest of this 3 section focuses on how the future changes in climate drivers might affect the ability of the energy 4 system transformation needed to mitigate climate change. The discussion of energy infrastructure in 5 this section is limited to electric electricity system vulnerability. 6 6.5.2 Impacts on Energy Supply 7 The increased weather-dependency of future low-carbon electricity systems amplifies the possible 8 impacts of climate change (Staffell and Pfenninger 2018). However, globally climate change impacts 9 on electricity generation – including hydro, wind and solar power potentials – should not compromise 10 climate mitigation strategies (high confidence). Many of the changes in the climate system will be 11 geographically complex at the regional and local levels. Thus, regionally climate change impacts on 12 electricity generation could be significant. Climate change impacts on bioenergy potentials are more 13 uncertain because of uncertainties associated with the crop response to climate change, future water 14 availability and crop deployment. Climate change can reduce the efficiency of thermal power generation 15 and increase the risk of power plant shutdowns during droughts. The potential additional cooling water 16 needs of CCS can increase these risks. 17 6.5.2.1 Hydropower 18 The impacts of climate change on hydropower will vary by region. High latitudes in the northern 19 hemisphere are anticipated to experience increased runoff and hydropower potential. For other regions, 20 studies find both increasing and decreasing runoff and hydropower potential. Areas with decreased 21 runoff are anticipated to experience reduced hydropower production and increased water conflict among 22 different economic activities. (high confidence) 23 Hydropower production is directly related to the availability of water. Changes in runoff and its 24 seasonality and changes in temperature and precipitation intensity will influence hydro electricity 25 production (IHA 2019). In general, increased precipitation will increase water availability and 26 hydropower production. Increased precipitation intensity, however, may impact the integrity of dam 27 structures and affect power production by increasing debris accumulation and vegetation growth. 28 Additionally, increased precipitation intensity results in the silting of the reservoirs or increases the 29 amount of water spilt, resulting in erosion (Schaeffer et al. 2012; IHA 2019). Climate change will likely 30 lead to higher air temperatures, resulting in more surface evaporation, less water storage, and loss of 31 equipment efficiency (Ebinger and Vergara 2011; Fluixá-Sanmartín et al. 2018; Hock et al. 2019; 32 Mukheibir 2013). Climate change may alter the demands for water use by other sectors that often rely 33 on stored water in multi-purpose reservoirs and may therefore generate conflicts over water use. The 34 increased need for water for irrigation and/or industry can affect the availability of water for hydropower 35 generation (Solaun and Cerdá 2017; Spalding-Fecher et al. 2016). Higher temperatures increase glacier 36 melt, increasing water availability for hydropower while the glaciers exist. Changes in the timing of 37 snow and ice melt may require upgrading in storage capacity and adaptation of the hydropower plant 38 management for fully exploiting the increase in water availability. 39 40 41 42 43 44 Do Not Cite, Quote or Distribute 6-71 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 2 Global Solar Atlas (ESMAP 2019) 3 4 5 Figure 6.20 Global spatial patterns of changes in gross hydropower potential based on climate forcing 6 from five climate models. Changes are shown for the 2050s (upper) and the 2080s (lower) for the low 7 emission scenario (RCP2.6; left) and highest emission scenario (RCP8.5; right) scenarios relative to the 8 control period (1971–2000). [Data source: (van Vliet et al. 2016a)]. 9 The conclusions regarding climate change impacts on hydropower vary due to differences in modelling 10 assumptions and methodology, such as choice of the climate and hydrological models, choice of metrics 11 (e.g., projected production vs hydropower potential), level of modelling details between local and global 12 studies, reservoir operation assumptions. Also important is how hydropower production matches up 13 with other reservoir purposes, accounting for other water and energy users, and how the competing uses 14 are impacted by climate change (Turner et al. 2017; van Vliet et al. 2016b). Nonetheless, analyses 15 consistently demonstrate that the global impact of climate change on hydropower will be small, but the 16 regional impacts will be larger, and will be both positive and negative (Figure 6.20) Gross global 17 hydropower potential in the 2050s has been estimated to slightly decrease (Hamududu and Killingtveit 18 2012) between 0.4% (for the low emission scenario) and 6.1% (for the highest emission scenario) for 19 the 2080s compared to 1971–2000 (van Vliet et al. 2016a). 20 Regional changes in hydropower are estimated from 5–20% increases for most areas in high latitudes 21 (van Vliet et al. 2016b; Turner et al. 2017) to decreases of 5–20% in areas with increased drought 22 conditions (Cronin et al. 2018). Models show a consistent increase in streamflow and hydropower 23 production by 2080 in high latitudes of the northern hemisphere and parts of the tropics (Figure 6.20) 24 (e.g., central Africa and southern Asia) while decreasing in the U.S., southern and central Europe, 25 Southeast Asia and southern South America, Africa and Australia (van Vliet et al. 2016c,a). Decreases 26 in hydropower production are indicated for parts of North America, central and southern Europe, the 27 Middle East, central Asia and Southern South America. Studies disagree on the changes in hydropower 28 production in China, central South America, and partially in southern Africa (Solaun and Cerdá 2019; 29 Hamududu and Killingtveit 2012; van Vliet et al. 2016b; Fan et al. 2020). Do Not Cite, Quote or Distribute 6-72 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 6.5.2.2 Wind Energy 2 Climate change will not substantially impact future wind resources and will not compromise the ability 3 of wind energy to support low-carbon transitions (high confidence). Changing wind variability may 4 have a small to modest impact on backup energy and storage needs (low confidence); however, current 5 evidence is largely from studies focused on Europe. 6 Long-term global wind energy resources are not expected to substantially change in future climate 7 scenarios (Karnauskas et al. 2018; Yalew et al. 2020; Pryor et al. 2020). However, recent research has 8 indicated consistent shifts in the geographic position of atmospheric jets in the high emission scenarios 9 (Harvey et al. 2014), which would decrease wind power potentials across the Northern Hemisphere 10 mid-latitudes and increase wind potentials across the tropics and the Southern Hemisphere. However, 11 the climate models used to make these assessments differ in how well they can reproduce the historical 12 wind resources and wind extremes, which raises questions about the robustness of their predictions of 13 future wind resources (Pryor et al. 2020). 14 There are many regional studies on changes in wind resources from climate change. For Europe, there 15 is medium evidence and moderate agreement that wind resources are already increasing and will 16 continue to increase in Northern Europe and decrease in Southern Europe (Moemken et al. 2018; 17 Carvalho et al. 2017; Devis et al. 2018). For North America, the various studies have low agreement 18 for the changes in future wind resources in part because the year-to-year variations in wind resources 19 are often larger than the future change due to climate change (Johnson and Erhardt 2016; Wang et al. 20 2020b; Costoya et al. 2020; Chen 2020). Studies show increases in future wind resources in windy areas 21 in South America (Ruffato-Ferreira et al. 2017; de Jong et al. 2019). No robust future changes in wind 22 resources have been identified in China (Xiong et al. 2019). However, none of the global or regional 23 studies of the effects of climate change on wind resources considers the fine-scale dependence of wind 24 resources on the topography and wind direction (Sanz Rodrigo et al. 2016; Dörenkämper et al. 2020) 25 or the effect of expanding wind energy exploitation (Lundquist et al. 2019; Volker et al. 2017). There 26 is limited evidence that extreme wind speeds, which can damage wind turbines, will increase due to 27 climate change (Pes et al. 2017; Pryor et al. 2020). Nevertheless, projected changes in Europe and North 28 America – regions where the most extensive analysis has been undertaken – are expected to be within 29 the estimates embedded in the design standards of wind turbines (Pryor and Barthelmie 2013). 30 Future wind generation in Europe could decrease in summer and autumn, increasing in winter in 31 northern-central Europe but decreasing in southernmost Europe (Carvalho et al. 2017). Towards 2100, 32 intra-annual variations increase in most of Europe, except around the Mediterranean area (Reyers et al. 33 2016), but this may reflect natural multidecadal variability (Wohland et al. 2019b). Wind speeds may 34 become more homogeneous over large geographical regions in Europe due to climate change, 35 increasing the likelihood of large areas experiencing high or low wind speeds simultaneously (Wohland 36 et al. 2017). These changes could result in fewer benefits in the transmission of wind generation between 37 countries and increased system integration costs. Europe could require a modest increase (up to 7%) in 38 backup energy towards the end of the 21st century due to more homogeneous wind conditions over 39 Europe (Wohland et al. 2017; Weber et al. 2018). However, other studies report that impact of climate 40 change is substantially smaller than interannual variability, with no significant impact on the occurrence 41 of extreme low wind production events in Europe (Van Der Wiel et al. 2019). If European electricity 42 systems are designed to manage the effects of existing weather variability on wind power, they can 43 likely also cope with climate change impacts on wind power (Ravestein et al. 2018). Changes in wind 44 generation variability caused by climate change are also reported for North America (Haupt et al. 2016; 45 Losada Carreño et al. 2018), with modest impacts on electricity system operation (Craig et al. 2019). Do Not Cite, Quote or Distribute 6-73 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 6.5.2.3 Solar Energy 2 Climate change is not expected to substantially impact global solar insolation and will not compromise 3 the ability of solar energy to support low-carbon transitions (high confidence). Models show dimming 4 and brightening in certain regions, driven by cloud, aerosol and water vapour trends [WGI,ch12,p31]. 5 The increase in surface temperature, which affects all regions, decreases solar power output by reducing 6 the PV panel efficiency. In some models and climate scenarios, the increases in solar insolation are 7 counterbalanced by reducing efficiency due to rising surface air temperatures, which increase 8 significantly in all models and scenarios (Jerez et al. 2015; Bartók et al. 2017; Emodi et al. 2019). 9 Increases in aerosols would reduce the solar resource available and add to maintenance costs 10 [AR6,WGI,ch12]. 11 In many emission scenarios, the effect on solar PV from temperature-induced efficiency losses is 12 smaller than the effect expected from changes on solar insolation due to variations in water vapour and 13 clouds in most regions. Also, future PV technologies will likely have higher efficiency, which would 14 offset temperature-related declines (Müller et al. 2019). Cloud cover is projected to decrease in the 15 subtropics (around –0.05% per year), including parts of North America, vast parts of Europe and China, 16 South America, South Africa and Australia (medium agreement, medium evidence). Thus, models 17 project modest (< 3%) increases in solar PV by the end of the century for southern Europe, northern 18 and southern Africa, Central America, and the Caribbean (Emodi et al. 2019). There are several studies 19 projecting decreasing solar production, but these are generally influenced by other factors, for example, 20 increasing air pollution (Ruosteenoja et al. 2019). The multi-model means for solar insolation in 21 regional models decrease 0.60 W m-2 per decade from 2006 to 2100 over most of Europe (Bartók et 22 al. 2017), with the most significant decreases in the Northern countries (Jerez et al. 2015). 23 6.5.2.4 Bioenergy 24 Climate change can affect biomass resource potential directly, via changes in the suitable range (i.e., 25 the area where bioenergy crops can grow) and/or changes in yield, and indirectly, through changes in 26 land availability. Increases in CO2 concentration increase biomass yield; climate changes (e.g., 27 temperature, precipitation, etc.) can either increase or decrease the yield and suitable range. 28 Climate change will shift the suitable range for bioenergy towards higher latitudes, but the net change 29 in the total suitable area is uncertain (high confidence). Several studies show northward shifts in the 30 suitable range for bioenergy in the northern hemisphere (Tuck et al. 2006; Bellarby et al. 2010; Preston 31 et al. 2016; Barney and DiTomaso 2010; Hager et al. 2014; Conant et al. 2018; Cronin et al. 2018; 32 Wang et al. 2014a), but the net effect of climate change on total suitable area varies by region, species, 33 and climate model (Barney and DiTomaso 2010; Hager et al. 2014; Wang et al. 2014a). 34 The effect of climate change on bioenergy crop yields will vary across region and feedstock (high 35 confidence); however, in general, yields will decline in low latitudes (medium confidence) and increase 36 in high latitudes (low confidence) (Haberl et al. 2010; Cosentino et al. 2012; Mbow et al. 2019; Cronin 37 et al. 2018; Preston et al. 2016). However, the average change in yield varies significantly across studies, 38 depending on the feedstock, region, and other factors (Dolan et al. 2020; Kyle et al. 2014) Mbow et al. 39 (2019); Beringer et al. (2011). Only a few studies extend the modelling of climate change impacts on 40 bioenergy to quantify the effect on bioenergy deployment or its implications on the energy system 41 (Calvin et al. 2013, 2019; Thornton et al. 2017; Kyle et al. 2014). These studies find that changes in 42 deployment are of the same sign as changes in yield; that is, if yields increase, then deployment 43 increases. 44 Some of the uncertainty in the sign and magnitude of the impacts of climate change on bioenergy 45 potential is due to uncertainties in CO2 fertilization (the increase in photosynthesis due to increases in 46 atmospheric CO2 concentration) (Bonjean Stanton et al. 2016; Haberl et al. 2011; Cronin et al. 2018; 47 Solaun and Cerdá 2019; Yalew et al. 2020). For example, earlier studies found that without CO2 Do Not Cite, Quote or Distribute 6-74 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 fertilization, climate change will reduce global bioenergy potential by about 16%; with CO2 2 fertilization, however, climate change increases this potential by 45% (Haberl et al. 2011). However, 3 newer studies in the U.S. find little effect of CO2 fertilization on switchgrass yield (Dolan et al. 2020). 4 There is also a considerable uncertainty across climate and crop models in estimating bioenergy 5 potential (Hager et al. 2014). 6 6.5.2.5 Thermal power plants 7 The operation of thermal power plants will be affected by climate change, deriving from changes in the 8 ambient conditions like temperature, humidity and water availability (Schaeffer et al. 2012) (high 9 confidence). Changes in ambient temperature have relatively small impacts on coal-fired and nuclear 10 power plants (Rankine cycle); however, gas-fired power plants (Brayton or combined-cycle) may have 11 their thermal efficiency and power output significantly decreased (De Sa and Al Zubaidy 2011; 12 Schaeffer et al. 2012). Droughts decrease potential cooling water for thermal power plants and increase 13 the probability of water outlet temperatures exceeding regulatory limits, leading to lower production or 14 even shutdowns. Thermal power utilization has been reported to be on average 3.8% lower during 15 drought years globally (van Vliet et al. 2016c). and further significant decreases in available thermal 16 power plant capacity due to climate change are projected (Koch et al. 2014; van Vliet et al. 2016b; 17 Yalew et al. 2020) . An increase in climate-related nuclear power disruptions has been reported in the 18 past decades globally (Ahmad 2021). 19 Carbon capture may increase cooling water usage significantly, especially in retrofits, with up to 50% 20 increase in water usage for coal-fired power plants globally, depending on the CCS technology (Rosa 21 et al. 2020, Section 6.4). In Asia, planned coal capacity is expected to be vulnerable to droughts, sea 22 level rise, and rising air temperatures, and this may be exacerbated by incorporating carbon capture 23 (Wang et al. 2019c). Recently, however, studies have proposed designs of CCS with a minimal increase 24 in water requirements (Mikunda et al. 2021; Magneschi et al. 2017). 25 Older thermal power plants can be retrofitted to mitigate climate impacts by altering and redesigning 26 the cooling systems (Westlén 2018), although the costs for these solutions may be high. For example, 27 dry cooling may be used instead of once-through cooling; however, it lowers thermal efficiency and 28 would leave plants vulnerable to ambient temperature increase (Ahmad 2021). Closed-circuit cooling 29 is much less sensitive to water temperature than once-through cooling (Bonjean Stanton et al. 2016). 30 Modifying policies and regulation of water and heat emissions from power plants may also be used to 31 mitigate plant reliability problems induced by climate change (Eisenack 2016; Mu et al. 2020), albeit 32 with potential impacts for other water users and ecology. Improvements in water use and thermal 33 efficiencies and the use of transmission capabilities over large geographical regions to mitigate risks on 34 individual plants are also possible mitigation options (Miara et al. 2017). 35 6.5.3 Impacts on Energy Consumption 36 Heating demand will decrease, and cooling demand will increase in response to climate change. Peak 37 load may increase more than energy consumption, and the changing spatial and temporal load patterns 38 can impact transmission and needs for storage, demands-side management, and peak-generating 39 capacity. (high confidence) 40 Climate change will decrease heating demands, especially in cold regions, and it will increase cooling 41 demands, especially in warm regions (Yalew et al. 2020). Recent studies report significant net impacts, 42 with the commercial and industrial sectors and substantial air condition penetration driving an increase 43 in energy demand (De Cian and Sue Wing 2019; Levesque et al. 2018; van Ruijven et al. 2019; Davis 44 and Gertler 2015; Yalew et al. 2020). For example, globally, De Cian and Sue Wing (2019) found a 7– 45 17% increase in energy consumption due to climate change in 2050, with the range depending on the 46 climate change scenario. The overall effects of climate change on building energy consumption are Do Not Cite, Quote or Distribute 6-75 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 regionally dependent. For example, Zhang et al. (2019) find that reduced heating will outweigh 2 increased cooling in the residential buildings in Europe, but the reverse will be true in China. 3 While many studies have focused on energy consumption, climate extremes are expected to alter peak 4 energy demands, with the potential for blackouts, brownouts, and other short-term energy system 5 impacts (Yalew et al. 2020). For example, peak energy demand during heatwaves can coincide with 6 reduced transmission and distribution capacity at higher temperatures. In large cities, extreme heat 7 events increase cooling degree days significantly, with the urban heat island effect compounding the 8 impact (Morakinyo et al. 2019). One study found that total electricity consumption at the end of the 9 century in the U.S. could increase on average by 20% during summer months and decrease on average 10 by 6% in the winder (Ralston Fonseca et al. 2019). While the average increase in consumption is 11 modest, climate change is projected to have severe impacts on the frequency and intensity of peak 12 electricity loads. (Auffhammer et al. 2017). Bartos et al. (2016) find that peak per-capita summertime 13 load in the U.S. may rise by 4.2%–15% by mid-century. Efficient cooling technologies and other 14 demand side measures can limit cooling energy loads during periods of particularly high 15 demand(Dreyfus et al. 2020; International Energy Agency (IEA) 2018). 16 [START BOX 6.6 HERE] 17 Box 6.6 Energy Resilience 18 In February 2021, the state of Texas was hit by three major storms and suffered significant scale power 19 outages. More than 4.5 million homes and businesses on the Texas electric grid were left without 20 electricity for days, limiting the ability to heat homes during dangerously low temperatures and leading 21 to food and clean water shortages (Busby et al. 2021). The Texas and other events – e.g., during 22 Typhoon Haiyan that affected Southeast Asia in 2013; the Australian bush fires in 2019–2020 and forest 23 fires in 2018 in California; water shortages in Cape Town, South Africa in 2018 and the western United 24 States during 2021 – raise the question of whether future low-carbon energy systems will be more or 25 less resilient than those of today. 26 Some characteristics of low-carbon energy systems will make them less resilient. Droughts reduce 27 hydroelectric electricity generation (Gleick 2016; van Vliet et al. 2016c); wind farms do not produce 28 electricity in calm conditions or shut down in very strong winds (Petersen and Troen 2012); solar PV 29 generation is reduced by clouds and is less efficient under extreme heat, dust storms, and wildfires 30 (Perry and Troccoli 2015; Jackson and Gunda 2021). In addition, the electrification of heating will 31 increase the weather dependence of electricity consumption (Staffell and Pfenninger 2018; Gea- 32 Bermúdez et al. 2021). Non-renewable generation, for example from nuclear and fossil power plants, 33 are also vulnerable to high temperatures and droughts as they depend on water for cooling (Cronin et 34 al. 2018; Ahmad 2021). 35 But some aspects of low-carbon energy systems will make them more resilient. Wind and solar farms 36 are often spread geographically, which reduces the chances of being affected by the same extreme 37 weather event (Perera et al. 2020). The diversification of energy sources, in which each component has 38 different vulnerabilities, increases resilience. Less reliance on thermal electricity generation 39 technologies will reduce the risks of curtailment or efficiency losses from droughts and heat waves. 40 (Lohrmann et al. 2019). More generally, increased electricity system integration and flexibility (Section 41 6.4.3) and weatherization of generators increases electricity system resilience (Heffron et al. 2021; 42 Busby et al. 2021). Likewise, local district micro-grids with appropriate enabling technologies (e.g., 43 distributed generation, energy storage, greater demand-side participation, electric vehicles) may ensure 44 access to electricity during major long-duration power outage events and radically enhance the 45 resilience of supply of essential demand (Stout et al. 2019). 46 [END BOX 6.6 HERE] Do Not Cite, Quote or Distribute 6-76 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 2 6.5.4 Impacts on Electricity System Vulnerability 3 While long-term trends are important for electricity system planning, short-term effects associated with 4 loss of power can be disruptive and lead to significant economic losses along with cascading impacts 5 on health and safety. Extreme weather and storms threaten the electricity system in different ways, 6 affecting system resilience, reliability, and adequacy (Moreno-Mateos et al. 2020). The implications of 7 climate change for electricity system vulnerability will depend on the degree to which climate change 8 alters the frequency and intensity of extreme weather events. The complex compounding effects of 9 simultaneous events (e.g., high winds and lightning occurring at the same time) are not well understood. 10 High wind speeds can shear lines through mechanical failure or cause lines to collide, causing transient 11 events (Panteli and Mancarella 2015; Yalew et al. 2020). Hurricane conditions can damage electricity 12 system infrastructures, including utility-scale wind and solar PV plants. Electricity systems may 13 experience high demand when lines are particularly at risk from mechanical failure from wind and 14 storm-related effects. However, except for medium evidence of increases in heavy precipitation 15 associated with tropical cyclones, there is limited evidence that extreme wind events will increase in 16 frequency or intensity in the future (Kumar et al. 2015; Pryor et al. 2020). 17 Wildfires pose a significant threat to electricity systems in dry conditions and arid regions (Dian et al. 18 2019). With climate change, wildfires will probably become more frequent (Flannigan et al. 2013) and 19 more difficult to address given that they frequently coincide with dry air and can be exacerbated by 20 high winds (Mitchell 2013). 21 Lightning can cause wildfires or common-mode faults on electricity systems associated with vegetation 22 falling on power substations or overhead lines but is more generally associated with flashovers and 23 overloads (Balijepalli et al. 2005). Climate change may change the probability of lightning-related 24 events (Romps et al. 2014). 25 Snow and icing can impact overhead power lines by weighing them down beyond their mechanical 26 limits, leading to collapse and cascading outages (Feng et al. 2015). Snow can also lead to flashovers 27 on lines due to wet snow accumulation on insulators (Croce et al. 2018; Yaji et al. 2014) and snow and 28 ice can impact wind turbines (Davis et al. 2016). Climate change will lower risk of snow and ice 29 conditions (McColl et al. 2012), but there is still an underlying risk of sporadic acute cold conditions 30 such as those associated with winter storms in Texas in 2021 (Box 6.). 31 Flooding poses a threat to the transmission and distribution systems by inundating low-lying substations 32 and underground cables. Coastal flooding also poses a threat to electricity system infrastructure. Rising 33 sea levels from climate change and associated storm surge may also pose a significant risk for coastal 34 electricity systems (Entriken and Lordan 2012). 35 Temperature increases influence electricity load profiles and electricity generation, as well as 36 potentially impact supporting information and communication infrastructure. Heat can pose direct 37 impacts to electricity system equipment such as transformers. Referred to as solar heat faults, they occur 38 under high temperatures and low wind speeds and can be exacerbated by the urban heat island effect 39 (McColl et al. 2012). Increasing temperatures affect system adequacy by reducing electric transmission 40 capacity, simultaneously increasing peak load due to increased air conditioning needs (Bartos et al. 41 2016). 42 [START BOX 6.7 HERE] 43 Box 6.7 Impacts of Renewable Energy Production on Climate 44 While climate change will affect energy systems (Section 6.5), the reverse is potentially also true: 45 increasing the use of renewable energy sources could affect local climate. Large solar PV arrays and Do Not Cite, Quote or Distribute 6-77 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 hydroelectric dams darken the land surface, and wind turbines extract the wind’s kinetic energy near 2 the Earth’s surface. Their environmental impacts of renewable energy production are mostly confined 3 to areas close to the production sources and have shown to be trivial compared to the mitigation benefits 4 of renewable energy (high confidence). 5 Solar Energy. Observations and model simulations have addressed whether large-scale solar PV power 6 plants can alter the local and regional climate. In rural areas at the local scale, large-scale solar PV farms 7 change the surface characteristics and affect air temperatures (Taha 2013). Measurements in rural 8 Arizona, U.S. show local nighttime temperatures 3–4°C warmer at the PV farm than surroundings 9 (Barron-Gafford et al. 2016). In contrast, measurements in urban settings show that solar PV panels on 10 roofs provide a cooling effect (Ma et al. 2017; Taha 2013). On the regional scale, modelling studies 11 suggest cooling in urban areas (0.11–0.53°C) and warming in rural areas (up to 0.27°C) (Millstein and 12 Menon 2011). Global climate model simulations show that solar panels induce regional cooling by 13 converting part of the incoming solar energy to electricity (Hu et al. 2016). However, converting the 14 generated electricity to heat in urban areas increases regional and local temperatures, compensating for 15 the cooling effect. 16 Wind Energy. Surface temperature changes in the vicinity of wind farms have been detected (Xia et al. 17 2019; Smith et al. 2013; Lee and Lundquist 2017; Takle et al. 2019) in the form of nighttime warming. 18 Data from field campaigns suggest that a “suppression of cooling” can explain the observed warming 19 (Takle et al. 2019). Regional and climate models have been used to describe the interactions between 20 turbines and the atmosphere and find minor impacts (Vautard et al. 2014). More sophisticated models 21 confirm the local warming effect of wind farms but report that the impact on the regional area is slight 22 and occasional (Wang et al. 2019d). Wind turbines alter the transport and dissipation of momentum 23 near the surface but do not directly impact the Earth's energy balance (Fischereit et al. 2021). However, 24 the secondary modifications to the energy and water exchanges have added implications for the climate 25 system (Jacobson and Archer 2012). 26 Hydropower. The potential climate impacts of hydropower concentrate on the GHG emissions from 27 organic matter decomposition when the carbon cycle is altered by the flooding of the hydroelectric 28 power plant reservoir (Ocko and Hamburg 2019), but emissions from organic matter decomposition 29 decrease over time. The darker surface of the reservoir, compared to the lighter surrounding land may 30 counterbalance part of the reduced GHG emissions by hydropower production (Wohlfahrt et al. 2021). 31 However, these impacts vary significantly among facilities due to the surrounding land properties and 32 the area inundated by the reservoir. 33 [END BOX 6.7 HERE 34 35 36 6.6 Key Characteristics of Net Zero Energy Systems 37 6.6.1 What is a Net Zero Energy System? 38 Limiting warming to well below 2°C requires that CO2 emissions from the energy sector be reduced to 39 near zero or even below zero (Chapter 3, 6.7). Policies, technologies, behaviours, investments, and other 40 factors will determine the speed at which countries transition to net zero energy systems – those that 41 emit very little or no emissions. An understanding of these future energy systems can help to chart a 42 course toward them over the coming decades. 43 This section synthesizes current understanding of net zero energy systems. Discussions surrounding 44 efforts to limit warming are frequently communicated in terms of the point in time at which net 45 anthropogenic CO2 emissions reach zero, accompanied by substantial reductions in non-CO2 emissions Do Not Cite, Quote or Distribute 6-78 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 (IPCC 2018, Chapter 3). Net-zero GHG goals are also common, and they require net-negative CO2 2 emissions to compensate for residual non-CO2 emissions. Economy-wide CO2 and GHG goals appear 3 in many government and corporate decarbonization strategies, and they are used in a variety of ways. 4 Most existing carbon-neutrality commitments from countries and subnational jurisdictions aim for 5 economies with very low emissions rather than zero emissions. Offsets, carbon dioxide removal (CDR) 6 methods, and/or land sink assumptions are used to achieve net zero goals (Kelly Levin et al. 2020). 7 Precisely describing a net zero energy system is complicated by the fact that different scenarios attribute 8 different future CO2 emissions to the energy system, even under scenarios where economy-wide CO2 9 emissions reach net zero. It is also complicated by the dependence of energy system configurations on 10 unknown future conditions like population and economic growth, and technological change. The energy 11 system is not the only source or sink of CO2 emissions. Terrestrial systems may store or emit carbon, 12 and CDR options like BECCS or DACCS can be used to store CO2, relieving pressure on the energy 13 system (Chapter 3). The location of such CDR options is ambiguous, as it might be deployed within or 14 outside of the energy sector (Figure 6.21), and many CDR options, such as DACCS, would be important 15 energy consumers (Bistline and Blanford 2021a, 6.6.2). If CDR methods are deployed outside of the 16 energy system (e.g., net negative agriculture, forestry, and land use CO2 emissions), it is possible for 17 the energy system to still emit CO2 but have economy-wide emissions of zero or below. When global 18 energy and industrial CO2 emissions reach net zero, the space remaining for fossil energy emissions is 19 determined by deployment of CDR options (Figure 6.21). 20 This section focuses on energy systems that produce very little or no CO2 emissions, referred to in this 21 chapter as net zero energy systems. While energy systems may not reach net zero concurrently with 22 economy-wide CO2 or GHG emissions, they are a useful benchmark for planning a path to net zero. 23 Note that the focus here is on energy systems with net zero CO2 emissions from fossil fuel combustion 24 and industrial processes, but the lessons will be broadly applicable to net zero GHG energy systems as 25 well. Net-zero GHG energy systems would incorporate the major efforts made to reduce non-CO2 26 emissions (e.g., CH4 from oil, gas and coal as discussed in Section 6.4) and would also need to 27 incorporate more CDR to compensate for remaining non-CO2 GHG emissions. Energy sector emissions 28 in many countries may not reach net zero at the same time as global energy system emissions (Figure 29 6.25, Cross-Chapter Box 3 in Chapter 3). 30 31 Do Not Cite, Quote or Distribute 6-79 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 2 Figure 6.21 Residual emissions and CDR when global energy and industrial CO2 emissions reach net 3 zero. Residual emissions and CDR in net zero scenarios show global differences across warming levels 4 (blue = <1.5˚C, green = <2.0˚C, orange = >2.0˚C). Points represent different models and scenarios from 5 the AR6 database. In each case, the boxes show the 25th to 75th percentile ranges, and whiskers show the 6 5th and 95th percentiles. Lines and circles within the boxes denote the median and mean values, 7 respectively. 8 6.6.2 Configurations of Net-zero Energy Systems 9 Net-zero energy systems entail trade-offs across economic, environmental, and social dimensions 10 (Davis et al. 2018). Many socioeconomic, policy, and market uncertainties will also influence the 11 configuration of net zero energy systems (van Vuuren et al. 2018; Krey et al. 2019; Bistline et al. 2019; 12 Smith et al. 2015, Azevedo et al. 2021, Pye et al, 2021). There are reasons that countries might focus 13 on one system configuration versus another, including cost, resource endowments, related industrial 14 bases, existing infrastructure, geography, governance, public acceptance, and other policy priorities 15 (Section 6.6.4 and Chapter 18 of WGII). 16 Explorations of net zero energy systems have been emerging in the detailed systems modelling literature 17 (Azevedo et al. 2021; Bistline 2021b). Reports associated with net zero economy-wide targets for 18 countries and subnational entities typically do not provide detailed roadmaps or modelling but discuss 19 high-level guiding principles, though more detailed studies are emerging at national levels (Williams et 20 al. 2021a; Duan et al. 2021; Capros et al. 2019; Wei et al. 2020). Most analysis has focused on 21 identifying potential decarbonization technologies and pathways for different sectors, enumerating 22 opportunities and barriers for each, their costs, highlighting robust insights, and characterizing key 23 uncertainties (Hepburn et al. 2019; Davis et al. 2018). 24 The literature on the configuration of net zero energy systems is limited in a few respects. On the one 25 hand, there is a robust integrated assessment literature that provides characterizations of these systems 26 in broad strokes (AR6 database), offering internally consistent global scenarios to link global warming 27 targets to regional/national goals. All integrated assessment scenarios that discuss net zero energy 28 system CO2 emissions provide high-level characterizations of net zero systems. Because these 29 characterizations have less temporal, spatial, technological, regulatory, and societal detail, however, 30 they may not consider the complexities that could ultimately influence regional, national, or local Do Not Cite, Quote or Distribute 6-80 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 pathways. High-fidelity models and analyses are needed to assess the economic and environmental 2 characteristics and the feasibility of many aspects of net zero or net negative emissions energy systems 3 (high confidence) (Bistline and Blanford 2020; Blanford et al. 2018). For example, evaluating the 4 competitiveness of electricity sector technologies requires temporal, spatial, and technological detail to 5 accurately represent system investments and operations (Bistline 2021c; Victoria et al. 2021; Helistoe 6 et al. 2019; Collins et al. 2017; Santen et al. 2017). 7 Configurations of net zero energy systems will vary by region but are likely to share several common 8 characteristics (high confidence) (Figure 6.22). We focus on seven of those common characteristics in 9 the remainder of this subsection. Do Not Cite, Quote or Distribute 6-81 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 2 3 Figure 6.22 Characteristics of global net zero energy systems when global energy and industrial CO2 4 emissions reach net zero. Scenarios reaching net zero emissions show differences in residual emissions Do Not Cite, Quote or Distribute 6-82 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 and carbon removal (a), energy resources (b), electrification (c), energy intensity (as measured here by 2 energy GDP-1) (d), and emissions trajectory (e), particularly with respect to warming levels (blue = 3 <1.5˚C, green = <2.0˚C, orange = >2.0˚C, gray = unspecified). Points represent individual scenarios, with 4 probability density distributions shown along each axis for each warming level (colours corresponding to 5 warming levels) and for all scenarios (black). Points represent different models and scenarios from the 6 AR6 database. 7 6.6.2.1 Limited and/or Targeted Use of Fossil Fuels 8 Net-zero energy systems will use far less fossil fuel than today (high confidence). The precise 9 quantity of fossil fuels will largely depend upon the relative costs of such fuels, electrification, 10 alternative fuels, and CDR (see Section 6.6.2.4) in the energy system (high confidence). All of these are 11 affected by regional differences in resources (McGlade and Ekins 2015), existing energy infrastructure 12 (Tong et al. 2019), demand for energy services, and climate and energy policies. Fossil fuel use may 13 persist, for example, if and where the costs of such fuels and the compensating carbon management 14 (e.g., CDR, CCS) are less than non-fossil energy. For most applications, however, it is likely that 15 electrification (McCollum et al. 2014; Madeddu et al. 2020; Zhang and Fujimori 2020) or use of non- 16 fossil alternative fuels (Zeman and Keith 2008; Graves et al. 2011; Hänggi et al. 2019; Ueckerdt et al. 17 2021) will prove to be the cheapest options. Most residual demand for fossil fuels is likely to 18 predominantly be petroleum and natural gas given their high energy density (Davis et al. 2018), while 19 demand for coal in net zero energy systems is likely to be very low (Luderer et al. 2018; Jakob et al. 20 2020, Section 6.7.4) (high confidence). 21 There is considerable flexibility regarding the overall quantity of liquid and gaseous fuels that will be 22 required in net zero energy systems (high confidence) (Figure 6.22, Section 6.7.4). This will be 23 determined by the relative value of such fuels as compared to systems which rely more or less heavily 24 on zero-emissions electricity. In turn, the share of any fuels that are fossil or fossil-derived is uncertain 25 and will depend on the feasibility of CCS and CDR technologies and long-term sequestration as 26 compared to alternative, carbon-neutral fuels. Moreover, to the extent that physical, biological, and/or 27 socio-political factors limit the availability of CDR (Smith et al. 2015; Field and Mach 2017), carbon 28 management efforts may prioritize residual emissions related to land use and other non-energy sources. 29 6.6.2.2 Zero or Negative CO2 Emissions from Electricity 30 Net-zero energy systems will rely on decarbonized or net-negative CO2 emissions electricity systems, 31 due to the many lower-cost options for producing zero-carbon electricity and the important role of end- 32 use electrification in decarbonizing other sectors (high confidence). 33 There are many possible configurations and technologies for zero- or net-negative-emissions electricity 34 systems (high confidence). These systems could entail a mix of variable renewables, dispatchable 35 renewables (e.g., biomass, hydropower), other firm, dispatchable (“on-demand”) low-carbon generation 36 (e.g., nuclear, CCS-equipped capacity), energy storage, transmission, carbon removal options (e.g., 37 BECCS, DACCS), and demand management (Bistline and Blanford 2021b; Bistline et al. 2018; Jenkins 38 et al. 2018b; Luderer et al. 2017). The marginal cost of deploying electricity sector mitigation options 39 increases as electricity emissions approach zero; in addition, the most cost-effective mix of system 40 resources changes as emissions approach zero and, therefore, so do the implications of electricity sector 41 mitigation for sustainability and other societal goals (Cole et al. 2021; Jayadev et al. 2020; Bistline et 42 al. 2018; Mileva et al. 2016; Sepulveda et al. 2018). Key factors influencing the electricity mix include 43 relative costs and system benefits, local resource bases, infrastructure availability, regional integration 44 and trade, co-benefits, societal preferences and other policy priorities, all of which vary by country and 45 region (Section 6.6.4). Many of these factors depend on when the net zero point is reached (Figure 46 6.22). Do Not Cite, Quote or Distribute 6-83 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 Based on their increasing economic competitiveness, VRE technologies, especially wind and solar 2 power, will likely comprise large shares of many regional generation mixes (high confidence) (Figure 3 6.22). While wind and solar will likely be prominent electricity resources, this does not imply that 100% 4 renewable energy systems will be pursued under all circumstances, since economic and operational 5 challenges increase nonlinearly as shares approach 100% (Box 6.8) (Bistline and Blanford 2021a; Cole 6 et al. 2021; Shaner et al. 2018; Frew et al. 2016; Imelda et al. 2018b). Real-world experience planning 7 and operating regional electricity systems with high instantaneous and annual shares of renewable 8 generation is accumulating, but debates continue about how much wind and solar should be included in 9 different systems, and the cost-effectiveness of mechanisms for managing variability (Box 6.8). Either 10 firm, dispatchable generation (including nuclear, CCS-equipped capacity, dispatchable renewables such 11 as geothermal, and fossil units run with low capacity factors and CDR to balance emissions) or seasonal 12 energy storage (alongside other balancing resources discussed in Box 6.8) will be needed to ensure 13 reliability and resource adequacy with high percentages of wind and solar (Jenkins et al. 2018b; 14 Dowling et al. 2020; Denholm et al. 2021) though each option involves uncertainty about costs, timing, 15 and public acceptance (Albertus et al. 2020). 16 Electricity systems require a range of different functional roles – for example, providing energy, 17 capacity, or ancillary services. As a result, a range of different types of generation, energy storage, and 18 transmission resources may be deployed in these systems (Baik et al. 2021). There are many options 19 for each of these roles, each with their strengths and weaknesses (Sections 6.4.3 and 6.4.4), and 20 deployment of these options will be influenced by the evolution of technological costs, system benefits, 21 and local resources (Veers et al. 2019; Mai et al. 2018; Bistline et al. 2018; Hirth 2015; Fell and Linn 22 2013). 23 System management is critical for zero- or negative-emissions electricity systems. Maintaining 24 reliability will increasingly entail system planning and operations that account for characteristics of 25 supply- and demand-side resources (Hu et al. 2018). Coordinated planning and operations will likely 26 become more prevalent across portions of the electricity system (e.g., integrated generation, 27 transmission, and distribution planning), across sectors, and across geographies (Bistline and Young 28 2019; Chan et al. 2018; Konstantelos et al. 2017; EPRI 2017, Section 6.4.3). 29 Energy storage will be increasingly important in net zero energy systems, especially in systems with 30 shares of VRE (high confidence). Deployment of energy storage will vary based on the system benefits 31 and values of different options (Arbabzadeh et al. 2019; Denholm and Mai 2019). Diurnal storage 32 options like lithium-ion batteries have different value than storing and discharging electricity over 33 longer periods through long-duration energy storage with less frequent cycling, which require different 34 technologies, supporting policies, and business models (Sepulveda et al. 2021; Dowling et al. 2020; 35 Gallo et al. 2016; Albertus et al. 2020; Blanco and Faaij 2017) (Section 6.4.4). The value of energy 36 storage varies with the level of deployment and on the competitiveness of economic complements such 37 as VRE options (Bistline and Young 2020; Mileva et al. 2016) and substitutes such as flexible demand 38 (Brown et al. 2018; Merrick et al. 2018), transmission (Merrick et al. 2018; Brown et al. 2018; 39 Schlachtberger et al. 2017; Bistline and Young 2019), trade (Bistline et al. 2020b), dispatchable 40 generators (Hittinger and Lueken 2015; Gils et al. 2017; Arbabzadeh et al. 2019), DAC (Daggash et al. 41 2019), and efficiencies in system operations (Tuohy et al. 2015). 42 The approach to other sectors could impact electricity sector planning, and the role of some technologies 43 (e.g., hydrogen, batteries, CCS) could depend on deployment in other sectors. CCS offers opportunities 44 for CO2 removal when fuelled with syngas or biomass containing carbon captured from the atmosphere 45 (Hepburn et al. 2019); however, concerns about lifecycle environmental impacts, uncertain costs, and 46 public acceptance are potential barriers to widespread deployment (Section 6.4.2). It is unclear whether 47 CDR options like BECCS will be included in the electricity mix to offset continued emissions in other 48 parts of the energy system or beyond (Mac Dowell et al. 2017; Luderer et al. 2018; Bauer et al. 2018a). Do Not Cite, Quote or Distribute 6-84 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 Some applications may also rely on PtX electricity conversion to create low-emissions synthetic fuels 2 (Sections 6.6.2.6, 6.4.4, and 6.4.5), which could impact electricity system planning and operations. 3 Additionally, if DAC technologies are used, electricity and heat requirements to operate DAC could 4 impact electricity system investments and operations (Bistline and Blanford 2021a; Realmonte et al. 5 2019). 6 [START BOX 6.8 HERE] 7 Box 6.8 100% Renewables in Net Zero Energy Systems 8 The decreasing cost and increasing performance of renewable energy has generated interest in the 9 feasibility of providing nearly all energy services with renewables. Renewable energy includes wind 10 power, solar power, hydroelectric power, bioenergy, geothermal energy, tidal power, and ocean power. 11 There are two primary frames around which 100% renewable energy systems are discussed: 100% 12 renewable electricity systems and 100% renewable energy systems, considering not only electricity but 13 all aspects of the energy system. 14 It is technically feasible to use very high renewable shares (e.g., above 75% of annual regional 15 generation) to meet hourly electricity demand under a range of conditions, especially when VRE 16 options, notably wind and solar, are complemented by other resources (high confidence). There are 17 currently many grids with high renewable shares and large anticipated roles for VRE sources, in 18 particular wind and solar (see Section 6.4), in future low-carbon electricity systems. An increasingly 19 large set of studies examines the feasibility of high renewable penetration and economic drivers under 20 different policy, technology, and market scenarios (Denholm et al. 2021; Blanford et al. 2021; Bistline 21 et al. 2019; Hansen et al. 2019; Jenkins et al. 2018b; Cochran et al. 2014; Dowling et al. 2020; Deason 22 2018). High wind and solar penetration involves technical and economic challenges due to their unique 23 characteristics such as spatial and temporal variability, short- and long-term uncertainty, and non- 24 synchronous generation (Cole et al. 2017). These challenges become increasingly important as 25 renewable shares approach 100% (Sections 6.6.2.2 and 6.4.3). 26 There are many balancing options in systems with very high renewables (Denholm et al. 2021; Bistline 27 2021a; Mai et al. 2018; Milligan et al. 2015; Jenkins et al. 2018b). 28 ● Energy storage: Energy storage technologies like batteries, pumped hydro, and hydrogen can 29 provide a range of system services (Balducci et al. 2018; Bistline et al. 2020a; Section 6.4.4). 30 Lithium-ion batteries have received attention as costs fall and installations increase, but very high 31 renewable shares typically entail either dispatchable generation or long-duration storage in addition 32 to short-duration options (Schill 2020; Arbabzadeh et al. 2019; Jenkins et al. 2018b). Energy storage 33 technologies are part of a broad set of options (including synchronous condensers, demand-side 34 measures, and even inverter-based technologies themselves) for providing grid services (Castillo 35 and Gayme 2014; EPRI 2019a). 36 ● Transmission and trade: To balance differences in resource availability, high renewable systems 37 will very likely entail investments in transmission capacity (Zappa et al. 2019; Pleßmann and 38 Blechinger 2017; Macdonald et al. 2016; Mai and Et al 2014; Section 6.4.5) and changes in trade 39 (Abrell and Rausch 2016; Bistline et al. 2019). These increases will likely be accompanied by 40 expanded balancing regions to take advantage of geographical smoothing. 41 ● Dispatchable (“on-demand”) generation: Dispatchable generation could include flexible fossil 42 units or low-carbon fuels such as hydrogen with lower minimum load levels (Bistline 2019; 43 Denholm et al. 2018), renewables like hydropower, geothermal, or biomass (Hansen et al. 2019; 44 Hirth 2016), or flexible nuclear (Jenkins et al. 2018a). The composition depends on costs and other 45 policy goals, though in all cases, capacity factors are low for these resources (Mills et al. 2020). 46 ● Demand management: Many low-emitting and high-renewables systems also utilize increased 47 load flexibility in the forms of energy efficiency, demand response, and demand flexibility, utilizing Do Not Cite, Quote or Distribute 6-85 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 newly electrified end uses such as electric vehicles to shape demand profiles to better match supply 2 (Bistline 2021a; Imelda et al. 2018a; Hale 2017; Brown et al. 2018; Ameli et al. 2017). 3 ● Sector coupling: Sector coupling includes increased end-use electrification and PtX electricity 4 conversion pathways, which may entail using electricity to create synthetic fuels such as hydrogen 5 (Ueckerdt et al. 2021; Davis et al. 2018) (see Sections 6.4.3, 6.4., 6.4.5, 6.6.4.3, and 6.6.4.6). 6 Deployment of integration options depends on their relative costs and value, regulations, and electricity 7 market design. There is considerable uncertainty about future technology costs, performance, 8 availability, scalability, and public acceptance (Kondziella and Bruckner 2016; Bistline et al. 2019). 9 Deploying balanced resources likely requires operational, market design, and other institutional 10 changes, as well as technological changes in some cases (Denholm et al. 2021; Cochran et al. 2014). 11 Mixes will differ based on resources, system size, flexibility, and whether grids are isolated or 12 interconnected. 13 Although there are no technical upper bounds on renewable electricity penetration, the economic value 14 of additional wind and solar capacity typically decreases as their penetration rises, creating economic 15 challenges at higher deployment levels (Denholm et al. 2021; Millstein et al. 2021; Cole et al. 2021; 16 Gowrisankaran et al. 2016; Hirth 2013). The integration options above, as well as changes to market 17 design, can mitigate these challenges but likely will not solve them, especially since these options can 18 exhibit declining value themselves (Denholm and Mai 2019; Bistline 2017; De Sisternes et al. 2016) 19 and may be complements or substitutes to each other. 20 Energy systems that are 100% renewable (including all parts of the energy sector, and not only 21 electricity generation) raise a range of technological, regulatory, market, and operational challenges that 22 make their competitiveness uncertain (high confidence). These systems require decarbonizing all 23 electricity, using this zero-carbon electricity broadly, and then utilizing zero-carbon energy carriers for 24 all end uses not served by electricity, for example, air travel, long-distance transport, and high- 25 temperature process heat. Broader questions emerge regarding the attractiveness of supplying all 26 energy, and not just electricity, with renewables (Figure 6.22). Integrated assessment and energy 27 systems research suggest large roles for renewables, but energy and electricity shares are far from 100%, 28 even with stringent emissions reductions targets and optimistic assumptions about future cost reductions 29 (Huntington et al. 2020; Jenkins et al. 2018b; Bauer et al. 2018; Bistline et al. 2018, Section 6.7.1). 30 Scenarios with 100% renewable energy systems are an emerging subset in the decarbonization 31 literature, especially at regional levels (Denholm et al. 2021; Hansen et al. 2019). Many 100% 32 renewables studies focus more heavily on electrification for decarbonizing end uses, and include less 33 biofuels and hydrogen than the broader literature on deep decarbonization (Bauer et al. 2018a). These 34 studies typically assume a constrained set of available technologies to demonstrate the technical 35 feasibility of very high renewable systems and do not optimize to find least-cost, technology-neutral 36 decarbonization pathways, and many 100% renewables studies focus on the electricity sector or a 37 limited number of sectors (Hansen et al. 2019; Jenkins et al. 2018a). In addition to renewables, studies 38 broadly agree that including additional low-carbon options – including not only low-carbon electricity 39 but also targeted use of fossil fuels with and without CCS (Section 6.6.2.1) and alternative fuels for 40 sectors that are difficult to electrify (Section 6.6.2.4) – can lower the cost of decarbonization even with 41 very high shares of renewables (Figure 6.22). However, there is disagreement about the magnitude of 42 cost savings from larger portfolios, which depend on context- and scenario-specific assumptions about 43 technologies, markets, and policies. 44 [END BOX 6.8 HERE] 45 6.6.2.3 Widespread Electrification of End Uses 46 Net-zero energy systems will rely more heavily on increased use of electricity (electrification) in end 47 uses (high confidence). The literature on net zero energy systems almost universally calls for increased Do Not Cite, Quote or Distribute 6-86 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 electrification (Williams et al. 2012; Sugiyama 2012; Williams et al. 2014; Rogelj et al. 2015a; Sachs 2 et al. 2016; Kriegler et al. 2014a; Sven et al. 2018; Luderer et al. 2018; Schreyer et al. 2020). At least 3 30% of the global final energy needs are expected to be served by electricity, with some estimates 4 suggesting upwards of 80% of total energy use being electrified (Figure 6.22, panel c). Increased 5 electrification is especially valuable in net zero energy systems in tandem with decarbonized electricity 6 generation or net-negative emissions electricity generation (Section 6.5.4.2). Flexible electric loads 7 (electric vehicles, smart appliances) can in turn facilitate incorporation of VRE electricity options, 8 increase system flexibility, and reduce needs for grid storage (Section 6.4.3) (Mathiesen et al. 2015); 9 Lund et al., 2018). 10 Several end-uses such as passenger transportation (light-duty electric vehicles, two and three wheelers, 11 buses, rail) as well as building energy uses (lighting, cooling) are likely to be electrified in net zero 12 energy systems (high confidence). Variations in projections of electrification largely result from 13 differences in expectations about the ability and cost-competitiveness of electricity to serve other end 14 uses such as non-rail freight transport, aviation, and heavy industry (McCollum et al. 2014; Breyer et 15 al. 2019; Bataille et al. 2016; EPRI 2018) (Section 6.5.4.4), especially relative to biofuels and hydrogen 16 (‘low carbon fuels’) (Sachs et al. 2016; Rockström et al. 2017; McCollum et al. 2014), the prospects for 17 which are still quite uncertain (Section 6.4). The emergence of CDR technologies and the extent to 18 which they allow for residual emissions as an alternative to electrification will also affect the overall 19 share of energy served by electricity (Section 6.6.2.7). 20 Regions endowed with cheap and plentiful low-carbon electricity resources (wind, solar, hydropower) 21 are likely to emphasize electrification, while those with substantial bioenergy resources or availability 22 of other liquid fuels might put less emphasis on electrification, particularly in hard-to-electrify end-uses 23 (medium confidence). For example, among a group of Latin American countries, relative assumptions 24 about liquid fuels and electricity result in an electrification range of 28–82% for achieving a net zero 25 energy system (Bataille et al. 2020). Similarly, the level of penetration of biofuels that can substitute 26 for electrification will depend on regional circumstances such as land-use constraints, competition with 27 food, and sustainability of biomass production (Section 6.6.2.4). 28 Electrification of most buildings services, with the possible exception of space heating in extreme 29 climates, is expected in net zero energy systems (high confidence) (Chapter 9). Space cooling and water 30 heating are expected to be largely electrified. Building electrification is expected to rely substantially 31 on heat pumps, which will help lower emissions both through reduced thermal requirements and higher 32 efficiencies (Mathiesen et al. 2015; Rissman et al.; Sven et al. 2018). The level of electrification for 33 heating will depend on the tradeoffs between building or household level heat pumps versus more 34 centralized district heating network options (Mathiesen et al. 2015; Brown et al. 2018), as well as the 35 cost and performance of heat pumps in more extreme climates and grid infrastructure (EPRI 2018; 36 Waite and Modi 2020). 37 A significant share of transportation, especially road transportation, is expected to be electrified in net 38 zero energy systems (high confidence). In road transportation, two-three wheelers, light-duty vehicles 39 (LDVs), and buses, are especially amenable to electrification, with more than half of passenger LDVs 40 expected to be electrified globally in net zero energy systems (medium confidence) ((Bataille et al. 2020; 41 Sven et al. 2018; Khalili et al. 2019; Fulton et al. 2015). Long-haul trucks, large ships, and aircraft are 42 expected to be harder to electrify absent technological breakthroughs (Mathiesen et al. 2015; Fulton et 43 al. 2015), although continued improvements in battery technology may enable electrification of long- 44 haul trucks (Nykvist and Olsson 2021; Chapter 10). Due to the relative ease of rail electrification, near 45 complete electrification of rail and a shift of air and truck freight to rail is expected in net zero energy 46 systems (Sven et al. 2018; Khalili et al. 2019; Rockström et al. 2017; Fulton et al. 2015). The degree of 47 modal shifts and electrification will depend on local factors such as infrastructure availability and 48 location accessibility. Due to the challenges associated with electrification of some transport modes, Do Not Cite, Quote or Distribute 6-87 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 net zero energy systems may include some residual emissions associated with the freight sector that are 2 offset through CDR technologies (Muratori et al. 2017b), or reliance on low and zero-carbon fuels 3 instead of electrification. 4 A non-trivial number of industry applications could be electrified as a part of a net zero energy system, 5 but direct electrification of heavy industry applications such as cement, primary steel manufacturing, 6 and chemical feedstocks is expected to be challenging (medium confidence) (Davis et al. 2018; 7 Madeddu et al. 2020; Philibert 2019; van Sluisveld et al. 2021). Process and boiler heating in industrial 8 facilities are anticipated to be electrified in net zero energy systems. Emissions intensity reductions for 9 cement and concrete production can be achieved through the use of electrified cement kilns, while 10 emissions associated with steel production can be reduced through the use of an electric arc furnace 11 (EAF) powered by decarbonized electricity (Rissman et al.). Electricity can also be used to replace 12 thermal heat such as resistive heating, electric arc furnaces, and laser sintering (Rissman et al.; Madeddu 13 et al. 2020). One study found that as much as 60% of the energy end-use in European industry could be 14 met with direct electrification using existing and emerging technologies (Madeddu et al. 2020). Industry 15 electrification for different regions will depend on the economics and availability of alternative 16 emissions mitigation strategies such as carbon neutral fuels and CCS (Davis et al. 2018; Madeddu et al. 17 2020). 18 6.6.2.4 Alternative Fuels in Sectors not Amenable to Electrification 19 Net-zero energy systems will need to rely on alternative fuels – notably hydrogen or biofuels – in several 20 sectors that are not amenable to electricity and otherwise hard to decarbonize (medium confidence). 21 Useful carbon-based fuels (e.g., methane, petroleum, methanol), hydrogen, ammonia, or alcohols can 22 be produced with net zero CO2 emissions and without fossil fuel inputs (Sections 6.4.4 and 6.4.5). For 23 example, liquid hydrocarbons can be synthesized via hydrogenation of non-fossil carbon by processes 24 such as Fischer-Tropsch (Mac Dowell et al. 2017) or by conversion of biomass (Tilman et al. 2009). 25 The resulting energy-dense fuels can serve applications that are difficult to electrify, but it is not clear 26 if and when the combined costs of obtaining necessary feedstocks and producing these fuels without 27 fossil inputs will be less than continuing to use fossil fuels and managing the related carbon through, 28 for example, CCS or CDR (Ueckerdt et al. 2021) 29 CO2 emissions from some energy services are expected to be particularly difficult to cost-effectively 30 avoid, among them aviation; long-distance freight by ships; process emissions from cement and steel 31 production; high-temperature heat (e.g., >1000°C); and electricity reliability in systems with high 32 penetration of variable renewable energy sources (NAS; Davis et al. 2018; Luderer et al. 2018; 33 Chiaramonti 2019; Sepulveda et al. 2018; Bataille 2020; Rissman et al.; Thiel and Stark 2021; Madeddu 34 et al. 2020). The literature focused on these services and sectors is growing, but remains limited, and 35 provides minimal guidance on the most promising or attractive technological options and systems for 36 avoiding these sectors’ emissions. Technological solutions do exist, but those mentioned in the literature 37 are prohibitively expensive, exist only at an early stage, and/or are subject to much broader concerns 38 about sustainability (e.g., biofuels) (Davis et al. 2018). 39 Liquid biofuels today supply about 4% of transportation energy worldwide, mostly as ethanol from 40 grain and sugar cane and biodiesel from oil seeds and waste oils (Davis et al. 2018). These biofuels 41 could conceivably be targeted to difficult-to-electrify sectors, but face substantial challenges related to 42 their life-cycle carbon emissions, cost, and further scalability (Tilman et al. 2009; Staples et al. 2018), 43 (Section 6.4.2). The extent to which biomass will supply liquid fuels or high temperature heat for 44 industry in a future net zero energy system will thus depend on advances in conversion technology that 45 enable use of feedstocks such as woody crops, agricultural residues, algae, and wastes, as well as 46 competing demands for bioenergy and land, the feasibility of other sources of carbon-neutral fuels, and 47 integration of bioenergy production with other objectives, including CDR, economic development, food 48 security, ecological conservation, and air quality (Lynd 2017; Laurens 2017; Williams and Laurens Do Not Cite, Quote or Distribute 6-88 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 2010; Strefler et al. 2018; Bauer et al. 2018a; Fargione 2010; Creutzig et al. 2015; Bauer et al. 2018b; 2 Muratori et al. 2020b; Chatziaras et al. 2016; Fennell et al. 2021) (Section 6.4.2.6). 3 Costs are the main barrier to synthesis of net zero emissions fuels (high confidence), particularly costs 4 of hydrogen (a constituent of hydrocarbons, ammonia, and alcohols) (Section 6.4.5). Today, most 5 hydrogen is supplied by steam reformation of fossil methane (CH4 into CO2 and H2) at a cost of 1.30- 6 1.50 USD kg-1 (Sherwin 2021). Non-fossil hydrogen can be obtained by electrolysis of water, at current 7 costs of 5-7 USD kg-1 H2-1 (assuming relatively low electricity costs and high utilization rates) (Graves 8 et al. 2011; Newborough and Cooley 2020; Peterson et al. 2020; DOE 2020a). At these costs for 9 electrolytic hydrogen, synthesized net zero emissions fuels would cost at least 1.6 USD per liter of 10 diesel equivalent (or 6 USD gallon-1 and 46 USD GJ-1, assuming non-fossil carbon feedstock costs of 11 100 USD per ton of CO2 and low process costs of 0.05 USD liter-1 or 1.5 USD GJ-1). Similar calculations 12 suggest that synthetic hydrocarbon fuels could currently avoid CO2 emissions at a cost of 936-1404 13 USD ton-1 (Ueckerdt et al. 2021). However, economies of scale are expected to bring these costs down 14 substantially in the future (Ueckerdt et al. 2021; IRENA 2020c), and R&D efforts are targeting 60-80% 15 reductions in costs (to less than 2 USD kg-1 (H2)-1) possibly by use of less mature but promising 16 technologies such as high-temperature electrolysis and thermochemical water splitting (Schmidt et al. 17 2017; Pes et al. 2017; DOE 2018; Saba et al. 2018; Kuckshinrichs et al. 2017; DOE 2020b). 18 Technologies capable of producing hydrogen directly from water and sunlight (photoelectrochemical 19 cells or photocatalysts) are also under development, but still at an early stage (DOE 2020a; Nielander 20 et al. 2015). High hydrogen production efficiencies have been demonstrated, but costs, capacity factors, 21 and lifetimes need to be improved in order to make such technologies feasible for net zero emissions 22 fuel production at scale (DOE 2020a; Newborough and Cooley 2020; McKone et al. 2014). 23 The carbon contained in net zero emissions hydrocarbons must have been removed from the atmosphere 24 either through DAC, or, in the case of biofuels, by photosynthesis (which could include CO 2 captured 25 from the exhaust of biomass or biogas combustion) (Zeman and Keith 2008; Graves et al. 2011). A 26 number of different groups are now developing DAC technologies, targeting costs of 100 USD per ton 27 of CO2 or less (Darton and Yang 2018; Keith et al. 2018; Fasihi et al. 2019). 28 29 Figure 6.23 Schematic of net zero emissions energy system, including methods to address difficult-to- 30 electrify sectors. (Source: Davis et al. 2018) Do Not Cite, Quote or Distribute 6-89 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 [START BOX 6.9 HERE] 2 Box 6.9 The Hydrogen Economy 3 The phrase “hydrogen economy” is often used to describe future energy systems in which hydrogen 4 plays a prominent role. These future energy systems would not use hydrogen for all end uses; they 5 would use hydrogen to complement other energy carriers, mainly electricity, where hydrogen might 6 have advantages. Hydrogen could provide long-term electricity storage to support high-penetration of 7 intermittent renewables and could enable trading and storage of electricity between different regions to 8 overcome seasonal or production capability differences (Dowling et al. 2020; Sepulveda et al. 2021). It 9 could also be used in lieu of natural gas for peaking generation, provide process heat for industrial 10 needs, or be used in the metal sector via direct reduction of iron ore (Chapter 11). Clean hydrogen could 11 be used as a feedstock in the production of various chemicals and synthetic hydrocarbons. Finally, 12 hydrogen-based fuel cells could power vehicles. Recent advances in battery storage make electric 13 vehicles the most attractive alternative for light-duty transport. However, fuel cell technology could 14 complement electric vehicles in supporting the decarbonisation of heavy-duty transport segments (e.g., 15 trucks, buses, ships, and trains) (Chapter 10). 16 Hydrogen production costs have historically been prohibitive, but recent technological developments 17 are bringing costs down. These developments include improvements in hydrogen production 18 technologies in terms of efficiency and capital costs (e.g., SMR) (Alrashed and Zahid 2021; Boretti and 19 Banik 2021) and the emergence of alternative production technologies such as electrolysers (Dawood 20 et al. 2020). These technological changes, along with decreasing costs of renewable power, are 21 increasing the viability of hydrogen. Other improvements in hydrogen-based technologies are also 22 emerging quickly. Gas turbines now run on blended fuels containing 5-95% hydrogen by volume (GE 23 2020) and could operate entirely on hydrogen by 2030 (Pflug et al. 2019). Fuel cell costs have decreased 24 by 80-95% since the early 2000s, while power density and durability have improved (Kurtz et al. 2019; 25 IEA 2019e; Jouin et al. 2016). 26 For hydrogen to support decarbonisation, it will need to be produced from zero-carbon or extremely 27 low-carbon energy sources. One such production category is “green hydrogen.” While there is no 28 unified definition for green hydrogen, it can be produced by the electrolysis of water using electricity 29 generated without carbon emissions (such as renewables). Hydrogen can also be produced through 30 biomass gasification with CCS (BECCS), leading to negative carbon emissions (del Pozo et al. 2021). 31 Additionally, “blue hydrogen” can be produced from natural gas through the process of auto-thermal 32 reforming (ATR) or steam methane reforming (SMR), combined with CCS technology that would 33 absorb most of the resulting CO2 (80-90%). 34 However, the potential role of hydrogen in future energy systems depends on more than just production 35 methods and costs. For some applications, the competitiveness of hydrogen also depends on the 36 availability of the infrastructure needed to transport and deliver it at relevant scales (Lee et al. 2021). 37 Transporting hydrogen through existing gas pipelines is generally not feasible without changes to the 38 infrastructure itself (Muratori et al. 2018; Gumber and Gurumoorthy 2018). Existing physical barriers, 39 such as steel embrittlement and degradation of seals, reinforcements in compressor stations, and valves, 40 require retrofitting during the conversion to H2 distribution or new H2 dedicated pipelines to be 41 constructed (Dohi et al. 2016). The capacity to leverage and convert existing gas infrastructure to 42 transport hydrogen will vary regionally, but in many cases could be the most economically viable 43 pathway (Brändle et al. 2021; Cerniauskas et al. 2020; Brooks 2021; Wettengel 2021). Hydrogen could 44 also be transported as liquid gas or as liquid organic hydrogen carriers such as ammonia, for which 45 industry knowledge exists (Hong et al. 2021; Wulf et al. 2018; Demir et al. 2018). Additionally, 46 improvements in fuel cell technologies are needed to make hydrogen-based transport economically Do Not Cite, Quote or Distribute 6-90 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 viable. There are also safety concerns associated with the flammability (Nilsson et al. 2017) and storage 2 (Andersson and Grönkvist 2019; Caglayan et al. 2019) of hydrogen which will need to be considered. 3 [END BOX 6.9 HERE] 4 6.6.2.5 Using Less Energy and Using It More Efficiently 5 Demand-side or demand reduction strategies include technology efficiency improvements, strategies 6 that reduce energy consumption or demand for energy services (such as reducing the use of personal 7 transportation, often called “conservation”) (Creutzig et al. 2018), and strategies such as load 8 curtailment. 9 Net-zero energy systems will use energy more efficiently than those of today (high confidence). Energy 10 efficiency and energy use reduction strategies are generally identified as being flexible and cost- 11 effective, with the potential for large scale deployment (Chapters 5, 9, 10, and 11). For this reason, 12 existing studies find that energy efficiency and demand reduction strategies will be important 13 contributors to net zero energy systems (Creutzig et al. 2018; Davis et al. 2018; DeAngelo et al. 2021). 14 Lower demand reduces the need for low-carbon energy or alternative fuel sources. 15 Characterizing efficiency of net zero energy systems is problematic due to measurement challenges 16 (high confidence). Efficiency itself is difficult to define and measure across full economies (Saunders 17 et al. 2021). There is no single definition of energy efficiency and the definition understandably depends 18 on the context used (Patterson 1996), which ranges from device level efficiency all the way to the 19 efficient use of energy throughout an economy. Broadly, energy efficient strategies allow for the same 20 level of services or output while using less energy. At the level of the entire economy, measures such 21 as primary or final energy per capita or per GDP are often used as a proxy for energy efficiency, but 22 these measures reflect not only efficiency, but also many other factors such as industrial structure, 23 endowed natural resources, consumer preferences, policies, and regulations. Energy efficiency and 24 other demand-side strategies represent such a large set of technologies, strategies, policies, market and 25 consumers’ responses and policies that aggregate measures can be difficult to define (Saunders et al. 26 2021). 27 Measurement issues notwithstanding, virtually all studies that address net zero energy systems assume 28 improved energy intensity in the future (high confidence). The overall efficiency outcomes and the 29 access to such improvements across different nations, however, is not clear. Energy consumption will 30 increase over time despite energy efficiency improvements due to population growth and development 31 (DeAngelo et al. 2021). 32 A study (DeAngelo et al. 2021) reviewed 153 IAM scenarios that attain net zero energy sector CO2 33 emissions and found that, under a scenario with net zero emissions: global final energy per capita lies 34 between 21–109 GJ per person (median: 57), in comparison to 2018 global final energy use of 55 GJ 35 per person; many countries use far more energy per capita than today as their incomes increase; global 36 final energy use per unit of economic output ranges from 0.7–2.2 EJ per trillion USD (median: 1.5), in 37 comparison to 5 EJ per trillion USD in 2018; and the median final energy consumption is 529 EJ. By 38 comparison, final energy consumption would be 550 EJ if current energy consumption per capita 39 continued under a future population of 10 billion people. Across all scenarios, total final energy 40 consumption is higher today than in the year in which net zero emissions are attained, and regionally, 41 only the OECD+EU and Eurasia have lower median total final energy than in 2010. 42 Net-zero energy systems will be characterized by greater efficiency and more efficient use of energy 43 across all sectors (high confidence). Road transportation efficiency improvements will require a shift 44 from liquid fuels (Chapters 5 and 10). Emissions reductions will come from a transition to electricity, 45 hydrogen, or synthetic fuels produced with low carbon energy sources or processes. Vehicle 46 automation, ride-hailing services, online shopping with door delivery services, and new solutions like Do Not Cite, Quote or Distribute 6-91 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 last mile delivery with drones may result in increased service share. Lighter vehicles, a shift to public 2 transit, and incorporation of 2- and 3-wheelers will be features of a net zero energy system (Chapter 3 10). Teleworking and automation of work may provide reductions in driving needs. Other sectors, such 4 as air travel and marine transportation may rely on alternative fuels such as biofuels, synthetic fuels, 5 ammonia, produced with zero carbon energy source (Section 6.6.2.4). 6 Under net zero energy systems, buildings would by characterized by improved construction materials, 7 an increase in multi-family dwellings, early retirement of inefficient buildings, smaller floor areas, and 8 smart controls to optimize energy use in the building, namely for heating, cooling, LED lighting, and 9 water heating (Chapter 9). End-uses would utilize electricity, or potentially hydrogen, produced from 10 zero carbon sources. The use of electricity for heating and cooking may often be a less efficient process 11 at converting primary energy to energy services than using natural gas, but using natural gas would 12 require CDR in order to be considered net zero emissions. Changes in behaviour may modestly lower 13 demand. Most economies would have buildings with more efficient technologies powered by zero 14 carbon electricity, and developing economics would shift from biomass to electricity, raising their 15 energy consumption as population and wealth increase under net zero energy systems. 16 Industry has seen major efficiency improvements in the past, but many processes are now close to their 17 thermodynamic limits. Electrification and breakthrough processes (such as producing steel with 18 electricity and H2), using recycled materials, using heat more efficiently by improving thermal 19 insulation, and using waste heat for heat pumps, as well using advanced sensors, monitoring, and 20 visualization and communication technologies may provide further efficiency improvements. (Chapter 21 11) 22 6.6.2.6 Greater Reliance on Integrated Energy System Approaches 23 Energy systems integration refers to connected planning and operations across energy carriers, 24 including electricity, fuels, and thermal resources. Coordinated planning could be important in lowering 25 system costs, increasing reliability, minimizing environmental impacts, and ensuring that costs of R&D 26 and infrastructure account for not just current needs but also for those of future energy systems (Section 27 6.4.3). Integration includes not only the physical energy systems themselves but also simultaneous 28 societal objectives (e.g., sustainable development goals), innovation processes (e.g., coordinating R&D 29 to increase the likelihood of beneficial technological spillovers), and other institutional and 30 infrastructural transformations (Sachs et al. 2019). Given system variability and differences in regional 31 resources, there are economic and technical advantages to greater coordination of investments and 32 policies across jurisdictions, sectors, and levels of government (Schmalensee and Stavins 2017). 33 Coordinated planning and operations can improve system economics by sharing resources, increasing 34 the utilization of capital-intensive assets, enhancing the geographical diversity of resource bases, and 35 smoothing demand. But integration could require regulatory and market frameworks to facilitate and 36 appropriate price signals to align incentives and to coordinate investments and operations. 37 Carbon-neutral energy systems are likely to be more interconnected than those of today (high 38 confidence). The many possible feedstocks, energy carriers, and interconversion processes imply a 39 greater need for the integration of production, transport, storage, and consumption of different fuels 40 (Davis et al. 2018). For instance, electrification is expected to play an important role in decarbonizing 41 light-duty vehicles (Chapter 10, Section 6.4.3), yet the electricity and transport sectors have few direct 42 interactions today. Systems integration and sectoral coupling are increasingly relevant to ensure that net 43 zero energy systems are reliable, resilient, and affordable (EPRI 2017; O’Malley et al. 2020; Buttler 44 and Spliethoff 2018; Martin et al. 2017). Deep decarbonization offers new opportunities and challenges 45 for integrating different sectors as well as supply- and demand-side options. For instance, increasing 46 electrification will change daily and seasonal load shapes, and end-use flexibilities and constraints could 47 impact the desirability of different supply-side technologies (EPRI 2019b; Brown et al. 2018). The 48 feasibility of net zero energy system configurations could depend on demonstrating cross-sector Do Not Cite, Quote or Distribute 6-92 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 benefits like balancing VRE sources in the electricity sector, and on offering the flexibility to produce 2 multiple products. For instance, low-emissions synthetic fuels could help to bridge stationary and 3 mobile applications, since fuel markets have more flexibility than instantaneously balanced electricity 4 markets due to the comparative ease and cost of large-scale, long-term storage of chemical fuels (Davis 5 et al. 2018). 6 There are few detailed archetypes of integrated energy systems that provide services with zero- or net- 7 negative CO2 emissions (such as (Jacobson et al. 2019)), so there is considerable uncertainty about 8 integration and interactions across parts of the system. Although alternate configurations, tradeoffs, and 9 pathways are still being identified, common elements include fuels and processes like zero- or negative- 10 CO2 electricity generation and transmission, hydrogen production and transport, synthetic hydrocarbon 11 production and transport, ammonia production and transport, and carbon management, where linkages 12 across pathways could include the use of electricity to produce hydrogen via electrolysis (Davis et al. 13 2018; Jenkins et al. 2018b; van Vuuren et al. 2018; Shih et al. 2018; Moore 2017; Smith et al. 2016). 14 Linked analytical frameworks are increasing being used to understand the potential role for system 15 coupling with greater temporal resolution, spatial resolution, and heterogeneity of consumer and firm 16 decisions (Pye et al. 2021; Gerboni et al. 2017; Santen et al. 2017; Collins et al. 2017; Bistline and de 17 la Chesnaye 2017; Bohringer and Rutherford 2008). 18 Challenges associated with integrating net zero energy systems include rapid technological change, the 19 importance of behavioural dimensions in domains with limited experience and data, policy changes and 20 interactions, and path dependence. Technological cost and public acceptance will influence the degree 21 of integration. Sectoral pathways will likely be adaptive and adjust based on the resolution of 22 uncertainties over time, and the relative competitiveness will evolve as the technological frontier 23 evolves, which is a complex and path-dependent function of deployment, R&D, and inter-industry 24 spillovers. Supply-side options interact with demand-side measures in increasingly integrated energy 25 systems (van Vuuren et al. 2018; Sorrell 2015). 26 6.6.2.7 Carbon Dioxide Removal 27 While CDR is likely necessary for net zero energy systems, the scale and mix of strategies is unclear – 28 nonetheless some combination of BECCS and DACCS are likely to be part of net zero energy systems 29 (high confidence). Studies indicate that energy-sector CDR may potentially remove 5–12 GtCO2 30 annually globally in net zero energy systems (Fuss et al. 2018) (Figure 6.22; Section 6.7; Chapter 12). 31 CDR is not intended as a replacement for emissions reduction, but rather as a complementary effort to 32 offset residual emissions from sectors that are not decarbonized and from other low-carbon technologies 33 such as fossil CCS (McLaren et al. 2019; Gaffney et al. 2020; Iyer et al. 2021). 34 CDR covers a broad set of methods and implementation options (Chapters 7 and 12). The two CDR 35 methods most relevant to the energy sector are BECCS, which is used to produce energy carriers, and 36 DACCS which is an energy user (Smith et al. 2016; Singh and Colosi 2021). BECCS has value as an 37 electricity generation technology, providing firm, dispatchable power to support electricity grids with 38 large amounts of VRE sources, and reducing the reliance on other means to manage these grids, 39 including electricity storage (Bistline and Blanford 2021a; Mac Dowell et al. 2017). BECCS may also 40 be used to produce liquid fuels or gaseous fuels, including hydrogen (Section 6.4.2.6) (Muratori et al. 41 2020b). For instance, CO2 from bio-refineries could be captured at <45 USD tCO2-1 (Sanchez et al. 42 2018). Similarly, while CO2 capture is expensive, its integration with hydrogen via biomass gasification 43 can be achieved at an incremental capital cost of 3-35% ((Muratori et al. 2020b); Section 6.4). As with 44 all uses of bioenergy, linkages to broad sustainability concerns may limit the viable development, as 45 will the presence of high-quality geologic sinks in close proximity (Melara et al. 2020). 46 DACCS offers a modular approach to CDR (Creutzig et al. 2019), but it could be a significant consumer 47 of energy. DAC could also interact with other elements of the energy systems as the captured CO2 could Do Not Cite, Quote or Distribute 6-93 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 be reused to produce low-carbon methanol and other fuels (Realmonte et al. 2019; Hoppe et al. 2018; 2 Zhang and Fujimori 2020). DACCS might also offer an alternative for use of excess electricity produced 3 by variable renewables (Wohland et al. 2018), though there are uncertainties about the economic 4 performance of this integrated approach. 5 6 6.6.3 The Institutional and Societal Characteristics of Net-zero Energy Systems 7 The transition to net zero energy systems is not just technological; it requires shifts in institutions, 8 organizations, and society more generally. As such, it involves institutional changes alongside changes 9 in supply, technology, or markets (Andrews-Speed 2016, Pai et al. 2021). Institutional relationships 10 between governments and energy sector actors (e.g., consumers, electricity companies) affect the nature 11 of net zero systems, as these entities may collaborate on or dispute net zero goals and measures to 12 achieve them. For example, following the Fukushima disaster, Japan placed emphasis on government- 13 utility-public cooperation on use of nuclear power as a means of reducing carbon emissions (Sklarew 14 2018). Institutions are instrumental in shaping net zero energy systems in multiple ways, complemented 15 by and interacting with the behaviours of actors and policy regimes in these systems (Figure 6.24). 16 17 Figure 6.24 A four-level framework for institutional change. The diagram depicts three levels of 18 institutions (1-3) which collectively govern actor behaviours (4). Source: Andrews-Speed 2016 19 One level of institutional interactions reflects embedded institutions, norms, beliefs, and ideas that 20 would need to change to support net zero energy systems. This applies, for example, to the objectives 21 of modern economies and the potentially contradictory dynamics embedded in the concept of “green 22 growth” (Stegemann and Ossewaarde 2018; Stoknes and Rockström 2018). The institutional 23 environment – the political and legal systems that govern exchanges and protect property rights – would 24 also need to be different in net zero energy systems. In this setting, changing regulations or subsidies 25 that continue to favour carbon-intensive systems over the technologies of a net zero energy system 26 might prove difficult (Sovacool 2017). More generally, net zero energy systems will need new 27 regulatory frameworks to undertake new challenges, from managing a more interconnected grid to 28 adequately governing underground storage of CO2. Institutions may also govern specific transactions, 29 such as firms or networks that supply energy fuels or services. Current actors are typically resistant to 30 disruptions, even if such disruptions may broadly benefit society (Kungl 2015, Mori 2018, Schmid et 31 al. 2017). Do Not Cite, Quote or Distribute 6-94 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 For example, one energy system characterized by differentiated institutional interactions is the United 2 States, where delivery of liquid fuels is lightly regulated, while electricity delivery is closely regulated 3 (Dworkin et al. 2013). Reforming this two-pronged system for decarbonization would require four types 4 of institutional change: (1) changes to the control systems that coordinate generation and transmission 5 through a pyramidal architecture for the operational control, dispatch, and delivery of electricity with a 6 primary emphasis on reliability; (2) changes to the financing of central-station power plants through 7 long-term bonds, as valued by Wall Street ratings analysts; (3) changes to the structure of investor- 8 owned utilities that attract private investors who expected decades of technological stability to yield 9 long-term, low-risk revenues; and (4) changes to regulations to restructure and limit excessive returns 10 and easy entry of new retail competitors, all recognizing local and national concerns through state and 11 federal regulatory agencies. The example shows how decision-making and the infrastructures involved 12 are layered, and can create “nested hierarchies” where institutions fulfill multiple roles for energy 13 governance or regulation simultaneously (Stern et al. 2016b). Internationally and across different parts 14 of the energy system, institutional challenges such as these could become even more stark and complex 15 (Van de Graaf 2013). 16 6.6.4 Regional Circumstances and Net-zero Energy Systems 17 Countries have flexibility to pursue options that make the most sense for their national circumstances 18 (Figure 6.25). They may emphasize supply transformation over demand reduction; deploy different 19 resources; engage at different levels in international energy trade; support different energy industries; 20 focus on different energy carriers (e.g., electricity, hydrogen); or focus more on distributed or integrated 21 systems, among others. Many factors may influence the long-term net zero energy systems that are 22 appropriate for any country’s national circumstances, including the following. 23 Future Technology. Technological transitions have often been driven by the relative merits of different 24 technology options. Recent trends in the use of PV cells, wind power, and in batteries, for example, 25 have been spurred by their increasing economic competitiveness (Section 6.3). Yet future technology 26 cannot be fully predicted, so it provides only a partial guide today for charting a path toward future 27 systems. 28 Indigenous Energy Resources. Countries may emphasize approaches that take advantage of indigenous 29 energy resources such as solar power, wind, hydroelectric resources, land for bioenergy crops, CO2 30 storage capability, or fossil resources to be used with CCS. Countries with less abundant resources may 31 put greater emphasis on demand reductions and regional integration. Countries with resource bases that 32 are easily tradeable, like low-carbon electricity or bioenergy, may choose to trade those resources rather 33 than use them domestically (Box 6.10, Section 6.4.3, 6.4.5). 34 Regional Climate. Climate influences heating and cooling demand, both of which influence countries’ 35 energy demands and energy infrastructure to meet those demands (Section 6.5). In addition to daily 36 demand profiles, heating and cooling are seasonal, influencing which energy sources may serve these 37 loads and the seasonal storage they require. Cooling is almost entirely served by electricity today, and 38 heating has commonly been served by non-electric fuels. In low-carbon energy systems, heating may 39 be increasingly served by electricity (Section 6.6.4), meaning that the influence of regional climate may 40 be strongest on countries’ electricity systems. 41 Current Energy System Configuration. Future sectoral energy demands and the potential for demand- 42 side transformation are partially determined by existing infrastructure (e.g., building stocks, transport 43 infrastructure). Countries with less developed or growing energy systems will have more flexibility to 44 create the systems that best match their long-term goals, but there may be substantial challenges in 45 transitioning directly to the most advanced low-carbon technology options, and countries may have 46 different capacities to absorb technology from other countries. Do Not Cite, Quote or Distribute 6-95 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 Regional Integration. Regional integration will allow countries to bridge energy gaps using external 2 linkages, including regional electricity integration and trade in hydrogen, biomass, and other fuels. 3 Countries with greater integration can rely more heavily on imports and may therefore rely less on 4 indigenous resources (Box 6.10). 5 6 7 8 Figure 6.25 Characteristics of regional energy systems and emissions when energy and industrial CO 2 9 emissions reach net zero. Regional differences are shown for residual emissions and carbon removal 10 (panel a), energy resources (panel b), electrification (panel c), and energy intensity (panel d). 11 Distributions of scenarios are shown along each axis for each region. Colour scheme is shown in panel a. 12 Points represent different models and scenarios from the AR6 database. 13 Societal Preferences. Citizens in every country have preferences for certain technological options or 14 mitigation approaches over others that will influence energy system choices. The public generally 15 prefers a future energy system based largely on renewables. Preferences for non-renewable energy 16 differ across regions and groups. For example, studies have found that people in the U.K., Germany, 17 the Netherlands, and Switzerland prefer renewable energy and personal energy efficiency and savings Do Not Cite, Quote or Distribute 6-96 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 to nuclear, fossil fuels and CCS (Demski et al. 2017; Jones et al. 2012; Scheer et al. 2013; Volken et al. 2 2018; Bessette and Arvai 2018; Steg 2018). Studies have found that people with higher education levels, 3 higher incomes, females, and liberals prefer renewables to fossil fuels and nuclear (Van Rijnsoever et 4 al. 2015; Bertsch et al. 2016; Blumer et al. 2018; Jobin et al. 2019). The willingness to pay for renewable 5 electricity differs by source (Ma et al. 2015; Sundt and Rehdanz 2015). 6 Technological Leadership, Economic Opportunities, and Growth. Countries may emphasize 7 technologies in which they intend to have technological leadership and a competitive advantage. These 8 could emerge over time or be based on current areas of opportunity or leadership. Industrial policy will 9 influence future energy system as technological choices can benefit or hamper incumbents or new 10 market actors. 11 Energy Security. Countries emphasizing import security will tend to rely more heavily on indigenous 12 resources (Section 6.3). Some indigenous resources may raise security of supply issues that will 13 influence energy system configurations. Bioenergy and hydropower, for example, can be subject to 14 import climate risks (6.5), and significant integration of VRE technologies will influence electricity 15 system infrastructure and management (6.6.2, Box 6.8). 16 Other Factors. Countries will consider a wide range of other factors in building toward low-carbon 17 energy systems. Population density, for example, will influence building and transportation energy 18 demands; economic transitions will influence industrial energy demands. Societal priorities beyond 19 climate, notably SDGs may influence technology choices and types of energy systems (Sections 6.3 20 and 6.7.7). 21 [START BOX 6.10 HERE] 22 Box 6.10 Regional Integration of Energy Systems 23 Energy systems are linked across countries in many ways: countries transport crude oil across the ocean 24 in supertankers, pipelines carry oil and natural gas across country boundaries, electric power lines cross 25 country boundaries, and countries trade industrial commodities that carry embodied energy or that are 26 essential inputs to mitigation technologies. Future systems will generate electricity using different 27 mixes of technologies, produce and transport different carriers (e.g., hydrogen or biofuels), and use far 28 less fossil fuel, among other major changes. Important examples include electricity, hydrogen, and 29 biomass. 30 Electricity System Integration. Net-zero energy systems will rely more heavily on electricity 31 generated from low-emissions technologies. Given the significant variations in the location of low- 32 carbon electricity resources and the temporal variability of some renewable electricity sources, notably 33 solar and wind power, regional electricity grids could reduce overall costs of net zero energy systems 34 (Section 6.4.5). Furthermore, electricity transmission interconnections could significantly reduce local 35 energy balancing costs and investment in peaking plants needed to meet security of supply 36 requirements, and it could increase system resilience, especially in the case of extreme events such as 37 heat waves or cold spells (Fasihi and Bogdanov 2016). Important challenges to regional electricity 38 integration include geopolitical concerns from cross-border trade and societal and technological 39 challenges associated with building new transmission lines. 40 Hydrogen Trade. Hydrogen may play an important role in future net zero energy systems, particularly 41 in applications where electricity is not economically advantageous (see Box 6.9). Hydrogen can be used 42 to decarbonize regions in which it is produced, and it can also be transported long distances to facilitate 43 decarbonization of sectors distant from sources of low-cost supply. Methods of long-distance, high- 44 volume hydrogen transport could include liquid storage, chemical carriers, and gaseous delivery via 45 pipelines (Section 6.4.5). In net zero systems with substantial wind and solar power generation, Do Not Cite, Quote or Distribute 6-97 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 hydrogen can be generated through electrolysis and then shipped to other locations. Important 2 challenges to hydrogen trade include cost-effective low carbon production, cost of delivery 3 infrastructure, storage, and end-use technology costs and safety. 4 Trade in Biomass. Biomass may also play an important role in net zero energy systems (Section 6.6.4, 5 Chapter 3). Large-scale bioenergy production and consumption is likely to trigger global biomass trade. 6 Global bioenergy trade volumes presently exceed 1 EJ yr-1, of which 60% is directly traded for energy 7 purposes (Proskurina et al. 2019b). Established trade mechanisms include wood pellet transport, 8 ethanol, and biodiesel (Proskurina et al. 2019a). In a net zero global energy system, bioenergy trade 9 could be greater than current trade of coal or natural gas, but less than that of petroleum (Sharmina et 10 al. 2017) (Mandley et al, 2020). Some studies indicate that Latin America and Africa could become key 11 exporting regions, with the EU, the USA, and East Asia emerging as key importers (Rentizelas et al. 12 2019; Alsaleh and Abdul-Rahim 2018). Studies have found that net bioenergy exports could be as high 13 as 10% of GDP for some Latin American countries, while other regions like the EU may be faced with 14 burgeoning import reliance (Mahlknecht et al. 2020; Daioglou et al. 2020b). In addition to challenges 15 associated with bioenergy production (Section 6.4, Chapter 7), important challenges to biomass trade 16 include differences in sustainability criteria and land/biomass definitions in different jurisdictions, and 17 difficulties in establishing consistent monitoring and auditing systems (Lamers et al, 2016). 18 [END BOX 6.10 HERE] 19 20 21 6.7 Low-Carbon Energy System Transitions in the Near- and Medium- 22 Term 23 6.7.1 Low-Carbon Energy System Transition Pathways 24 6.7.1.1 Energy System Emissions 25 Without additional efforts to reduce emissions, it is very unlikely that energy system CO 2 emissions 26 will decrease sufficiently to limit warming to well below 2°C (high confidence). Scenarios assuming 27 improvements in technology but no additional climate policies beyond those in place today provide a 28 benchmark for comparison against energy-related CO2 emissions in mitigation scenarios (Figure 6.26). 29 Emissions in these reference scenarios increase through 2050 but span a broad range (Chapter 3 Figure 30 3.16; Riahi et al. 2017; Wei et al. 2018). The highest emissions levels are about four times current 31 emissions; the lowest are modestly below today’s emissions. Emissions in these scenarios increase in 32 most regions, but they diverge significantly across regions (Bauer et al. 2017). Asia and the Middle East 33 and Africa account for the majority of increased emissions across these scenarios (Figure 6.27). While 34 it is unlikely that there will be no new climate policies in the future, these scenarios nonetheless support 35 the conclusion that the energy sector will not be decarbonized without explicit policy actions to reduce 36 emissions. 37 Warming cannot be limited to well below 2°C without rapid and deep reductions in energy system GHG 38 emissions (high confidence). Energy sector CO2 emissions fall by 87-97% (interquartile range) by 2050 39 in scenarios limiting warming to 1.5°C with no or limited overshoot and 60-79% in scenarios limiting 40 likely warming to 2°C (Figure 6.26). Energy sector GHG emissions fall by 85-95% (interquartile range) 41 in scenarios limiting warming to 1.5°C with no or limited overshoot and 62-78% in scenarios limiting 42 likely warming to 2°C (Figure 6.26). In 2030, in scenarios limiting warming to 1.5°C with no or limited 43 overshoot, net CO2 and GHG emissions fall by 35-51% and 38-52% respectively. Key characteristics 44 of emissions pathways – the year of peak emissions, the year when net emissions reach zero, and the 45 pace of emissions reductions – vary widely across countries and regions. These differences arise from Do Not Cite, Quote or Distribute 6-98 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 differences in economic development, demographics, resource endowments, land use, and potential 2 carbon sinks (Schreyer et al. 2020)(Schaeffer, et al.2020; Schreyer, et al., 2020; van Soest, Heleen, et 3 al., 2021;Figure 6.27, Figure 6.28, Box 6.11). If countries do not move quickly to reduce emissions – if 4 reductions are delayed – a more rapid energy transition will subsequently be required to limit warming 5 to 2°C or below (Rogelj et al. 2015a, 2018a; IPCC 2018). 6 GHG COCH4 2 CH4 120 8000 120 100 7000 90 100 100 Emissions relative to 2020 (%) Emissions relative to 2020 (%) Emissions relative to 2020 (%) 80 Emissions (Mt-CO2/year) 6000 80 80 70 5000 60 60 60 4000 50 40 40 40 3000 20 20 30 2000 20 0 0 1000 10 -20 0 -20 0 2030 20402020 2050 2030 2030 2040 2050 2040 2030 2040 2050 2050 1.5°C without overshoot 1.5°C with overshoot Likely below 2°C Likely below 2°C with delay 7 8 Figure 6.26 Projected energy sector GHG emissions for the 1.5°C scenarios (without and with overshoot), 9 and likely below 2°C scenarios (without and with delayed policy action) during 2020-2050 (Source: AR6 10 Scenario Database). Boxes indicate 25th and 75th percentiles while whiskers indicate 5th and 95th 11 percentiles. GHG emissions are inclusive of energy sector CO 2, CH4, N2O emissions and 80% of global 12 HFC emissions. Number of model-scenario combinations in AR6 database: 1.5C without overshoot: 170, 13 1.5C with overshoot: 177, 2C without delay: 297, 2C without delay: 124. 14 Do Not Cite, Quote or Distribute 6-99 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 2 3 Figure 6.27 Net regional (R5) CO2 emissions from energy across scenarios. for the 1.5°C scenarios 4 (without and with overshoot), and likely below 2°C scenarios (without and with delayed policy action) 5 during 2020-2050 (Source: AR6 Scenario Database). Boxes indicate 25th and 75th percentiles while 6 whiskers indicate 5th and 95th percentiles. Most mitigation scenarios are based on a cost-minimizing 7 framework that does not consider historical responsibility or other equity approaches. 8 Do Not Cite, Quote or Distribute 6-100 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 Figure 6.28 The timing of net zero emissions for full economy GHGs, energy sector CO 2, and electricity 2 sector CO2. Boxes indicate 25th and 75th percentiles, centre black line is the median, while whiskers 3 indicate 1.5x the inter-quartile range. The vertical dashed lines represent the median point at which 4 emissions in the scenarios have dropped by 95% (pink) and 97.5% (purple), respectively. Dots represent 5 individual scenarios. The fraction indicates the number of scenarios reaching net zero by 2100 out of the 6 total sample. (Source: AR6 Scenario Database) 7 The timing of net zero energy system emissions varies substantially across scenarios. In scenarios 8 limiting warming to 1.5°C with no or limited overshoot (likely below 2°C), the energy system reaches 9 net zero CO2 emissions (interquartile range) from 2060 onwards (2080-). (Figure 6.28). However, net 10 emissions reach near-zero more quickly. For example, in scenarios limiting warming to 1.5C with no 11 or limited overshoot (likely below 2C) net energy system CO2 emissions drop by 95% between 2056 12 and 2075 (2073 and 2093). Net full economy GHG emissions reach zero more slowly than net CO2 13 emissions. In some scenarios, net energy system CO2 and total GHG emissions do not reach zero this 14 century, offset by CDR in other sectors. 15 The timing of emissions reductions will vary across the different parts of the energy sector (Figure 16 6.28). To decarbonize most cost-effectively, global net CO2 emissions from electricity generation will 17 likely reach zero before the rest of the energy sector (medium confidence). In scenarios limiting 18 warming to 1.5C with no or limited overshoot (likely below 2C), net electricity sector CO2 emissions 19 (interquartile range) reach zero globally between 2044 and 2055 (2052 and 2078) (Figure 6.28). It is 20 likely to be less-costly to reduce net CO2 emissions close to or below zero in the electricity sector than 21 in other sectors, because there are relatively more low-emissions options in electricity. Sectors such as 22 long-distance transport, air transport, and process heat are anticipated to face greater challenges to 23 decarbonization than the electricity sector (Rogelj et al. 2018b, 2015b; Clark and Herzog 2014; IPCC 24 2018; Luderer et al. 2018). 25 In addition, there are potential options to remove CO2 from the atmosphere in the electricity sector, 26 notably BECCS, which would allow electricity sector emissions to drop below zero. Without CDR 27 options, electricity sector emissions may not fall all the way to zero. If CDR is accomplished in other 28 sectors and not in electricity, some fossil fuel plants may still lead to positive net electricity sector CO2 29 emissions even in net zero economies (Williams et al. 2021a; Bistline and Blanford 2021b) Do Not Cite, Quote or Distribute 6-101 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 Electricity Transport 120 140 100 120 80 Relative to 2020 levels (%) Relative to 2020 levels (%) 100 60 40 80 20 60 0 40 -20 20 -40 -60 0 2030 2040 2050 2030 2040 2050 CH4 8000 Industry Residential and commercial 7000 200 140 180 120 Emissions (Mt-CO2/year) 6000 160 Relative to 2020 levels (%) Relative to 2020 levels (%) 5000 140 100 120 4000 80 100 3000 60 80 60 2000 40 40 1000 20 20 0 0 0 2020 2030 2040 20302050 2030 2040 2040 2050 2050 1.5°C without overshoot 1.5°C with overshoot Likely below 2°C Likely below 2°C with delay 1 2 Figure 6.29 Reductions in CO2 emissions relative to 2020 levels for the 1.5°C scenarios (without and with 3 overshoot), and likely below 2°C scenarios (without and with delayed policy action) during 2030-2050 4 (Source: AR6 Scenario Database). Boxes indicate 25th and 75th percentiles while whiskers indicate 5th and 5 95th percentiles. 6 We lack sufficient understanding to pin down precise dates at which energy system CO2 emissions in 7 individual countries, regions, or sectors will reach net zero. Net-zero timing is based on many factors 8 that are not known today or are bound up in development of key technologies, such as energy storage, 9 bioenergy, or hydrogen. Some countries have low-carbon resource bases that could support deep 10 emissions reductions, while others do not. Timing is also affected by the availability of CDR options, 11 whether these options are in the energy sector or elsewhere, and the discount rate used to assess 12 strategies (Bednar et al. 2019; Emmerling et al. 2019). Moreover, while many scenarios are designed 13 to minimize global mitigation costs, many other frameworks exist for allocating mitigation effort across 14 countries (Chapter 4; van den Berg, N. J., et al., 2019). Do Not Cite, Quote or Distribute 6-102 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 6.7.1.2 Low-carbon energy transition strategies 2 There are multiple technological routes to reduce energy system emissions (see Section 6.6). Here we 3 discuss three of these: (1) decarbonizing primary energy and electricity generation, (2) switching to 4 electricity, bioenergy, hydrogen, and other fuels produced from low-carbon sources, and (3) limiting 5 energy use through improvement of efficiency and conservation. CDR is discussed in Section 6.7.1.X; 6 Fossil fuel transitions are discussed in Section 6.7.4. 7 Decarbonizing Primary Energy and Electricity Generation. Limiting warming to well below 2°C 8 requires a rapid and dramatic increase in energy produced from low- or zero-carbon sources (high 9 confidence). Low- and zero-carbon technologies produce 74-82% (interquartile range) of primary 10 energy in 2050 in scenarios limiting warming to 1.5°C with no or limited overshoot and 55-68% in 11 likely below 2°C scenarios (Figure 6.29). The share of low-carbon technologies in global primary 12 energy supply today is below 20% (Section 6.3, Chapter 3,Figure 6.29). The percentage of low- and 13 zero-carbon energy will depend in part on the evolution of energy demand – the more that energy 14 demand grows, the more energy from low- and zero-carbon sources will be needed and the higher the 15 percentage of total primary energy these sources will represent. 16 Low- and zero-carbon sources produce 97-99% of global electricity in 2050 in scenarios limiting 17 warming to 1.5°C with no or limited overshoot and 93-97% in likely below 2°C scenarios (Figure 6.29) 18 (medium confidence). Decarbonizing electricity generation, in tandem with increasing use of electricity 19 (see below), is an essential near-term strategy for limiting warming. The increase in low- and zero- 20 carbon electricity will occur while electricity demand grows substantially. Studies have projected that 21 global electricity demand will roughly double by 2050 and quadruple to quintuple by 2100 irrespective 22 of efforts to reduce emissions (Bauer et al. 2017; Luderer et al. 2017; IEA 2019a). 23 Renewable energy, especially generation from solar and wind, is likely to have an important role in 24 many low-carbon electricity systems. The contributions of wind and solar electricity will depend on 25 their levelized costs relative to other options, integration costs, system value, and the ability to integrate 26 variable resources into the grid (Section 6.6). Electric sector technology mixes will vary by region but 27 will typically include additional resources such as hydropower, nuclear power, fossil generation with 28 CCS, energy storage resources, and geothermal energy, among others. Contributions of different 29 options vary widely across scenarios based on different assumptions about these factors (Figure 6.30). 30 Nonetheless, it is likely that wind and solar will dominate low-carbon generation and capacity growth 31 over the next couple decades due to supporting policies in many countries and due to their significant 32 roles in early electric sector decarbonization, alongside reductions in coal generation (Bistline and 33 Blanford 2021b; Pan et al. 2021). Clean firm technologies play important roles in providing flexibility 34 and on-demand generation for longer durations, though deployment of these technologies is typically 35 associated with deeper decarbonization levels (e.g., beyond 70-80% reductions), which are likely to be 36 more important after 2030 in many regions, and with more limited CDR deployment (Baik et al. 2021; 37 Williams et al. 2021a; Bistline and Blanford 2021a). Do Not Cite, Quote or Distribute 6-103 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 Low-carbon energy in primary energy Bioenergy in primary energy Low-carbon energy in electricity 100 40 100 90 90 35 80 80 30 70 70 25 Share (%) 60 Share (%) Share (%) 60 50 20 50 40 40 15 30 30 20 10 20 10 5 10 0 2020 2030 2040 2050 0 CH4 0 2020 2030 2040 2050 2020 2030 2040 2050 8000 Solar and wind in electricity CCS in electricity Nuclear in electricity 7000 90 40 30 80 Emissions (Mt-CO2/year) 6000 35 25 70 30 5000 60 20 25 Share (%) Share (%) Share (%) 50 4000 20 15 40 3000 15 30 10 2000 10 20 5 10 5 1000 0 0 0 2020 0 2030 2040 2050 2020 2030 2040 2050 2020 2030 2040 2050 2020 2030 2040 2050 1.5°C without overshoot 1.5°C with overshoot Likely below 2°C Likely below 2°C with delay 1 2 3 Figure 6.30 Shares of low carbon energy (all sources except unabated fossil fuels) and bioenergy 4 (including both traditional and commercial biomass) in total primary energy, and solar+wind, CCS and 5 nuclear in electricity for the 1.5°C scenarios (without and with overshoot), and likely below 2°C scenarios 6 (without and with delayed policy action) during 2020-2050 (Source: AR6 Scenario Database). Boxes 7 indicate 25th and 75th percentiles while whiskers indicate 5th and 95th percentiles. 8 [START BOX 6.11 HERE] 9 Box 6.11 Illustrative Low-Carbon Energy System Transitions 10 There are multiple possible strategies to transform the energy system to reach net zero CO2 emissions 11 and to limit likely warming to 2°C or below. All pathways rely on the strategies for net zero CO2 energy 12 systems highlighted in Section 6.6.2, but they vary in the emphasis that they put on different aspects of 13 these strategies and the pace at which they approach net zero emissions. The pathway that any country 14 or region might follow will depend on a wide variety of factors (Section 6.6.4), including, for example, 15 resource endowments, trade and integration with other countries and regions, carbon sequestration 16 potential, public acceptability of various technologies, climate, the nature of domestic industries, the 17 degree of urbanization, and the relationship with other societal priorities such as energy access, energy 18 security, air pollution, and economic competitiveness. The illustrative mitigation pathways presented 19 in this box demonstrate four distinct strategies for energy system transformations and how each plays 20 out for a different region, aligned with global strategies that would contribute to limiting warming to 21 1.5°C. Each pathway represents a very different vision of a net zero energy system. Yet, all these 22 pathways share the common characteristic of a dramatic system-wide transformation over the coming Do Not Cite, Quote or Distribute 6-104 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 decades. 2 3 4 5 Box 6.11, Figure 1 Illustrative Mitigation Pathway 2.0-Neg: Latin America & Caribbean (LAM) in a 6 likely below 2°C scenario (LAM net-zero economy 2040-2045, net zero energy system 2045-2050). Supply 7 side focus with growing dependency on carbon dioxide removal and AFOLU, thus achieves net-zero CO2 8 relatively early. 9 10 11 12 Box 6.11, Figure 2 Illustrative Mitigation Pathway 1.5-Renewables: Africa (AF) in a 1.5°C scenario (AF 13 net-zero economy, 2055-2060, AF net zero energy system 2055-2060). Rapid expansion of non-biomass 14 renewables, high electrification, and a fossil fuel phaseout. 15 Do Not Cite, Quote or Distribute 6-105 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 2 3 Box 6.11, Figure 3 Illustrative Mitigation Pathway 1.5-Low Demand: Developed Countries (DEV) in a 4 1.5°C scenario (DEV net-zero economy, 2055-2060, net zero energy system 2075-2080). Major reduction 5 of energy demand, high electrification, and gradual fossil fuel phaseout. 6 7 8 9 Box 6.11, Figure 4 Illustrative Mitigation Pathway 1.5-Shifting Pathways: Asia and Developing Pacific 10 (APC) in a 1.5°C scenario (APC net-zero economy, 2075-2080, net-zero energy system 2090-2095). 11 Renewables, high electrification, fossil fuel phaseout and low AFOLU emissions. Reaches net-zero CO2 12 relatively late. 13 14 Box 6.11, Table 1. Summary of selected Illustrative Mitigation Pathways energy system characteristics in 15 2050 for the chosen regions. 16 Energ y sector CO2 Low CO2 Reduc Variable carbon Removal tion renewable electricity BECCS, 2020- Energy electricity capacity AFOLU, Year net-zero CO2 2050 intensity generation additions Total GDP per capita emissions Do Not Cite, Quote or Distribute 6-106 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 MJ / PPP PPP Electri % EJ/yr (%) GW/yr Gt CO2 yr-1 Full Energ USD2010 USD2010/person city econo y Region 202 20 205 202 205 my sector 2050 0 50 2020 0 0 0 2050 2020 2050 2. 0.5 7.7 15. 21. 1295 2040- 2045- 2025- Neg LAM 124 3 1.1, 0.2, 1.9 24860 1 (9) (53) 4 5 2 2045 2050 2030 Ren AF 1. 0.1 18 2055- 2055- 2025- 85 7.6 9 (5) (84) 5 217 0.1, 0, 0.1 2965 8521 2060 2060 2030 0. 4.6 37 4294 2055- 2075- 2045- LD DEV 92 3.1 52 188 0, 0.6, 0.6 61291 9 (13) (72) 5 2060 2080 2050 1. 3 (7 91 1051 2075- 2085- 2085- SP APC 76 3.8 123 603 0.1, 0.4, 0.4 37180 1 ) (79) 4 2080 2090 2090 1 2 3 [END BOX 6.11 HERE] 4 5 Switching to Low-Carbon Energy Carriers. Switching to energy carriers produced from low-carbon 6 sources will be an important strategy for energy sector decarbonization. Accelerated electrification of 7 end uses such as light duty transport, space heating, and cooking is a critical near-term mitigation 8 strategy (Waisman et al. 2019; Sugiyama 2012; Zou et al. 2015; Rockström et al. 2017; IEA 2019f; 9 Tang et al. 2021a). Electricity supplies 48-58% (interquartile range) of the global final energy demand 10 by 2050 in scenarios limiting warming to 1.5°C with no or limited overshoot and 36-47% in likely 11 below 2°C scenarios (Figure 6.29). Globally, the current level of electrification is about 20%. 12 Indirect electrification encompasses the use of electricity to produce hydrogen and synthetic fuels 13 (efuels or power fuels). The extent of indirect electrification of final energy will depend on resource 14 endowments and other regionally specific circumstances. Although indirect electrification is less 15 efficient compared to direct electrification, it allows low-carbon fuels to be imported from regions with 16 abundant low carbon electricity generation resources (Fasihi and Breyer 2020; Fasihi and Bogdanov 17 2016; Lehtveer et al. 2019, Box 6.10 on regional integration). 18 While electrifying end uses is a key decarbonization strategy, some end uses such as long-distance 19 transport (freight, aviation, and shipping) and energy-intensive industries will be harder to electrify. For 20 these sectors, alternative fuels or energy carriers such as biofuels, hydrogen, ammonia or synthetic 21 methane, may be needed (see Section 6.6 and Box 6.9). Most scenarios find that hydrogen consumption 22 will grow gradually, becoming more valuable when the energy system has become predominantly low- 23 carbon (Figure 6.31). 24 Do Not Cite, Quote or Distribute 6-107 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 Electricity in final energy Electricity in final energy Electricity in final energy Electricity in final energy 70 (transport) (industry) (residential & commercial) 50 80 100 60 45 70 90 40 80 50 60 35 70 Share (%) 40 50 Share (%) Share (%) Share (%) 30 60 25 40 50 30 20 30 40 20 15 30 20 10 20 10 10 5 10 0 0 0 0 2020 2030 2040 2050 2020 2030 2040 2050 2020 2030 2040 2050 2020 2030 2040 2050 Hydrogen in final energy Hydrogen in final energy Hydrogen in final energy Hydrogen in final energy 9 (transport) (industry) (residential & commercial) 30 16 4.5 8 14 4 7 25 3.5 12 6 3 20 Share (%) 10 Share (%) Share (%) Share (%) 5 2.5 4 15 8 2 1.5 3 6 10 1 2 4 0.5 5 1 2 0 0 0 0 -0.5 2020 2030 2040 2050 2020 2030 2040 2050 2020 2030 2040 2050 2020 2030 2040 2050 1 2 Figure 6.31 Shares of electricity and hydrogen in final energy for scenarios limiting warming to 1.5°C 3 scenarios (without and with overshoot) and scenarios limiting likely warming to below 2°C (without and 4 with delayed policy action) during 2020-2050 (Source: AR6 Scenario Database). Boxes indicate 25th and 5 75th percentiles while whiskers indicate 5th and 95th percentiles. 6 Reducing Energy Demand. Energy service demand is expected to continue to increase with growth of 7 the economy, but there is great uncertainty about how much it will increase (Riahi et al. 2017; Bauer et 8 al. 2017; Yu et al. 2018). Given the need to produce low-carbon energy, the scale of energy demand is 9 a critical determinant of the mitigation challenge (Riahi et al. 2012). Higher energy demand calls for 10 more low-carbon energy and increases the challenge; lower energy demand reduces the need for low- 11 carbon sources and therefore can ease a low-carbon transtion. Recent studies have shown that tempering 12 the growth of energy demand, while ensuring services and needs are still satisfied, can materially affect 13 the need for technological CDR (see below) (Grubler et al. 2018; van Vuuren et al. 2018). Two of the 14 Illustrative Mitigation Pathways (IMP-SP, IMP-LD) feature substantially lower final energy demand 15 across buildings, transport, and industry than most other pathways in the literature. In some cases, 16 energy demand levels are lower in 2050 (and later) than in 2019. These lower demands result in less 17 reliance on bioenergy and a more limited role for CDR. [Ch. 3, Figure 3.18] 18 6.7.1.3 Technology options to offset residual emissions 19 CDR technologies can offset emissions from sectors that are difficult to decarbonize (Section 6.6), 20 altering the timeline and character of energy sector transitions. A number of studies suggest that CDR 21 is no longer a choice but rather a necessity to limit warming to 1.5°C (Luderer et al. 2018; Rogelj et al. 22 2015a; van Vuuren et al. 2018; Detz et al. 2018; Strefler et al. 2018). The reliance on CDR varies across 23 scenarios and is tightly linked future energy demand and the rate of emission reductions in the next two 24 decades: deeper near-term emissions reductions will reduce the need to rely on CDR to constrain 25 cumulative CO2 emissions. Some studies have argued that only with a transition to lower energy 26 demands will it be possible to largely eliminate the need for engineered CDR options (Grubler et al. 27 2018; van Vuuren et al. 2018). Overall, the amount of CDR will depend on CO2 capture costs, lifestyle 28 changes, reduction in non-CO2 GHGs, and utilization of zero-emission end-use fuels (van Vuuren et al. 29 2018)(Muratori et al, 2017; van Vuuren et al, 2018). 30 There is substantial uncertainty about the amount of CDR that might ultimately be deployed. In most 31 scenarios that limit warming to 1.5°C, CDR deployment is fairly limited through 2030 at less than 1 32 Gt-CO2 yr-1. The key projected increase in CDR deployment (BECCS and DAC only) occurs between Do Not Cite, Quote or Distribute 6-108 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 2030 and 2050 with annual CDR in 2050 projected at 2.5-7.5 Gt-CO2 yr-1 in 2050 (interquartile range) 2 in scenarios limiting warming to 1.5C with limited or no overshoot and 0.7-1.4 Gt-CO2 yr-1 in 2050 in 3 scenarios limiting warming to 2C with limited or no overshoot. This characteristic of scenarios largely 4 reflects substantial capacity addition of BECCS power plants. BECCS is also deployed in multiple ways 5 across sectors. For instance, the contribution (interquartile range) of BECCS to electricity is 1-5% in 6 2050 in scenarios limiting warming to 1.5C with limited or no overshoot and 0-5% in scenarios limiting 7 likely warming to below 2C . The contribution (interquartile range) of BECCS to liquid fuels is 9-21% 8 in 2050 in scenarios limiting warming to 1.5C with limited or no overshoot and 2-11% in scenarios 9 limiting likely warming to below 2C. Large-scale deployment of CDR allows flexibility in timing of 10 emissions reduction in hard-to-decarbonize sectors. 11 CDR will influence the potential fossil-related stranded assets (Box 6.13). Availability of low-cost CDR 12 can help reduce premature retirement for some fossil fuel infrastructure. CDR can allow countries to 13 reach net zero emissions without phasing out all fossil fuels. Specific infrastructure could also be 14 extended if it is used to burn biomass or other non-emitting sources. For example, existing coal-fired 15 power plants, particularly those with CCS, could be co-fired with biomass (Pradhan et al, 2021; Woolf 16 et al, 2016; Lu et al, 2019). In many scenarios, energy sector CDR is deployed to such an extent that 17 energy sector CO2 emissions become negative in the second half of the century (Chapter 3). 18 [START BOX 6.12 HERE] 19 Box 6.12 Taking Stock of the Energy System Transition 20 The Global Stocktake is a regularly occurring process under the UNFCCC in which efforts will be made 21 to understand progress on, among other things, global mitigation. Collective progress of countries 22 towards the Paris Agreement goal will be assessed and its outcome will inform Parties in updating and 23 enhancing their NDCs. This box explores potential indicators to understand energy system mitigation 24 progress. 25 CO2 emissions from fuel combustion are the bottom line on energy system progress. Beyond CO 2 26 emissions, primary energy demand by energy sources, final energy consumption by sectors, and total 27 electricity demand provide a first order assessment of energy system transitions. The year at which CO2 28 emissions peak is also important. The Kaya Identity can be used to decompose energy system CO2 29 emissions into carbon intensity of the energy system (CO2 emissions from fossil-fuel combustion and 30 industry divided by energy use), energy intensity (energy use divided by economic output), and 31 economic output. The impacts of energy and climate policy are reflected in the changes of carbon 32 intensity and energy intensity. Carbon intensity captures decarbonization of energy supply systems, for 33 example through fuel switching from fossil fuels to non-fossil fuels, upscaling of low carbon energy 34 sources, and deploying carbon dioxide removal technologies. The carbon intensity of electricity is 35 specifically important, given the role of the electricity sector in near-term mitigation. Economy wide 36 energy intensity represents efforts of demand-side energy, such as energy conservation, increase of 37 energy performance of technologies, structural change of economy, and development of efficient urban 38 infrastructure. 39 Beyond these aggregate indicators, a second order assessment would capture more details, such as the 40 electrification rate, share of renewables, nuclear, CCS or other low carbon technologies in electricity 41 generation, land area used for energy production, and numbers of EV or PHEV. Consumption of coal, 42 oil and gas captures the underlying factors of CO2 emissions. The emphasis of these indicators could 43 differ across countries in the context of national specific circumstances. Technology- or project-based 44 statistics are also useful to check the progress of the low-carbon transition, for example, the number of 45 CCS facilities. Do Not Cite, Quote or Distribute 6-109 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 A critical challenge in the assessment of energy sector progress is how to measure societal, institutional, 2 and political progress. These factors are difficult to quantify, yet they are fundamental determinants of 3 the ability to reduce emissions. Public opinion, special interest politics, implications of mitigation for 4 employment, energy subsidies, and energy policies are all critical indicators of progress. In addition, 5 while much of the literature focuses on national level action, mitigation is increasingly being led by 6 cities, states, provinces, businesses, and other subnational or non-national actors. Understanding the 7 progress of these actors will be critical to assess energy system mitigation progress. New research is 8 needed to better assess these “societal” indicators and the role of non-national actors. 9 [END BOX 6.12 HERE] 10 6.7.2. Investments in Technology and Infrastructure 11 Total global energy investment was roughly USD 1940 billion yr-1 in 2019 (IEA 2021f). This total can 12 be broken down into the following main categories: fossil-related energy supply, including oil, gas, and 13 coal extraction and fossil electricity generation (USD 990 billion yr-1); renewable electricity, primarily 14 solar and wind (USD 340 billion yr-1); nuclear energy (USD 40 billion yr-1); electricity networks (USD 15 270 billion yr-1); and end-use energy efficiency (USD 270 billion yr-1). 16 Energy investment needs are projected to rise going forward, according to investment-focused scenario 17 studies found in the literature (Bertram et al. 2021; McCollum et al. 2018a; Zhou et al. 2019). While 18 these increases are projected to occur in emissions-intensive pathways as well as low-carbon pathways, 19 they are projected to be largest in low-carbon pathways. Average annual global energy investments over 20 the 2016-2050 period range (across six models) from USD 2100 to 4100 billion yr-1 in pathways likely 21 limiting warming to 2°C and from USD 2400 to 4700 billion yr-1 in pathways limiting warming to 1.5°C 22 with no or limited overshoot (McCollum et al., 2018). Whatever the scenario, a significant and growing 23 share of investments between now and 2050 will be channelled toward infrastructure build-out in 24 emerging economies, particularly in Asia (Zhou et al. 2019). 25 More widespread electrification of buildings, transport, and industry means particularly substantial 26 investment in the electricity system. According to C1-C3 pathways in the AR6 scenario database, such 27 investments could be at the following average annual levels (inter-quartile range, USD2015) over the 28 2023-2052 timeframe: USD 1670 to 3070 billion yr-1 (C1), 1600 to 2780 billion yr-1 (C2), and 1330- 29 2680 billion yr-1 (C3). (See also 3.6.1.3) 30 Beyond these sector-wide numbers, a key feature of stringent mitigation pathways is a pronounced 31 reallocation of investment flows across sub-sectors, namely from unabated fossil fuels (extraction, 32 conversion, and electricity generation) and toward renewables, nuclear power, CCS, electricity 33 networks and storage, and end-use energy efficiency (McCollum et al. 2018a; Bertram et al. 2021; IEA 34 2021f) (Figure 6.32). Investments in solar, wind, and electricity transmission, distribution, and storage 35 increase the most in mitigation scenarios. Up to 2050, the bulk of these investments are made in OECD 36 and Asian countries (Figure 6.33). While fossil fuel extraction investments exhibit a marked 37 downscaling across all regions, compared to reference scenarios, the declines are especially strong in 38 the Middle East, REF, and OECD. Do Not Cite, Quote or Distribute 6-110 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 2 Figure 6.32 Global average annual investments from 2023 to 2052 (undiscounted, in USD billion yr-1) for 3 electricity supply sub-sectors and for extraction of fossil fuels in C1-C3 pathways (Source: AR6 Scenario 4 Database and Chapter 3). Historical investments are also shown for comparison (Source: IEA, 2021; 5 approximations are made for hydro and geothermal based on available data; solar and wind values are 6 for 2020). ‘T&D’: transmission and distribution of electricity. Bars show median values across models- 7 scenarios, and whiskers the inter-quartile ranges. See Chapters 3 and 15 for additional information on 8 investments and finance. 9 10 Do Not Cite, Quote or Distribute 6-111 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 Figure 6.33 Regional average annual investments from 2023 to 2052 (undiscounted, in USD billion yr-1) 2 for four of the largest sub-sectors of the energy system in C1-C3 pathways (Source: AR6 Scenario 3 Database and Chapter 3). Historical investments are also shown for comparison (Source: IEA, 2016). 4 ‘T&D’: transmission and distribution of electricity. ‘Extr.’: extraction of fossil fuels. Bars show median 5 values across models-scenarios, and whiskers the inter-quartile ranges. See Chapters 3 and 15 for 6 additional information on investments and finance. 7 Investments into end-use energy efficiency are projected to also be substantial in mitigation pathways, 8 potentially upwards of several hundred USD billion yr-1 on average to 2050, compared to USD 270 9 billion yr-1 in 2019 (McCollum et al. 2018a; IEA 2021f). However, the literature is inconsistent in how 10 demand-side investments are calculated, as boundary conditions are less clear than for energy supply 11 investments. Taking a broader definition can result in estimates that are an order-of-magnitude higher, 12 meaning as large or larger than supply-side investments (IEA 2021f; Grubler et al. 2012). 13 Increasing low-carbon investment primarily requires shifting existing capital investment through 14 regulation and incentives as well as removing existing investment barriers (McCollum et al. 15 2018a)(Ameli, N. et al., 2021: Hafner et al. 2020: McCollum et al. 2018). While there is a considerable 16 amount of capital in the world, it is not always available to those wishing to invest in certain projects. 17 Total annual global investment in fixed capital was USD 22.4 trillion in 2021, over an order-of- 18 magnitude larger than energy sector investment (World Bank, 2021). 19 Future investment patterns will vary by region, as they do now, due to differences in risk profiles, 20 resource endowments and economic and governance structures (Zhou et al. 2019)(6.6; Ameli, N. et al., 21 2021; Fizaine et al. 2016; Zhou et al., 2019). In rapidly growing countries, investments to support a 22 low-carbon energy system transition will be integrated with those needed to meet rapidly increasing 23 energy demands, irrespective of whether efforts are made to reduce emissions. In less-rapidly-growing 24 countries (Sun et al. 2019), investments will focus on transitioning current energy systems to low- 25 carbon configurations. Most current energy investments are concentrated in high- and upper-middle 26 income countries (IEA 2021f), but this will change as investment needs continue to grow in today’s 27 lower-middle and low-income countries (Bertram et al. 2021; McCollum et al. 2018a; Zhou et al. 2019; 28 IEA 2021f). 29 6.7.3 Energy System Lock-In and Path Dependence 30 Path dependence refers to resistance to change due to favourable socio-economic conditions with 31 existing systems; decisions made in the past unduly shape future trajectories. Carbon lock-in is a 32 specific type of path dependence (Seto et al. 2016). Given that energy system mitigation will require a 33 major course change from recent history, lock-in is an important issue for emission reductions in the 34 energy sector. While lock-in is typically expressed in terms of physical infrastructure that would need 35 to be retired early to reach mitigation goals, it involves a much broader set of issues that go beyond 36 physical systems and into societal and institutional systems (Table 6.11). 37 38 Table 6.11 Lock-in types and typical mechanisms (Kotilainen et al. 2020). Reproduced under Creative 39 Commons 4.0 International License. Do Not Cite, Quote or Distribute 6-112 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 2 6.7.3.1 Societal and Institutional Inertia 3 A combination of factors - user, business, cultural, regulatory, and transnational - will hinder low- 4 carbon energy transitions. Strong path dependencies, even in early formative stages, can have lasting 5 impacts on energy systems, producing inertia that cuts across technological, economic, institutional and 6 political dimensions (high confidence) (Vadén et al. 2019; Rickards et al. 2014) Chapter 5). 7 Energy systems exemplify the ways in which massive volumes of labor, capital, and effort become sunk 8 into particular institutional configurations (Bridge et al. 2013, 2018). Several embedded factors affect 9 large-scale transformation of these systems and make technological diffusion a complex process: 10 ● User environments affect purchase activities and can involve the integration of new technologies 11 into user practices and the development of new preferences, routines, habits and even values 12 (Kanger et al. 2019). 13 ● Business environments can shape the development of industries, business models, supply and 14 distribution chains, instrument constituencies and repair facilities (Béland and Howlett 2016). 15 ● Culture can encompass the articulation of positive discourses, narratives, and visions that enhance 16 cultural legitimacy and societal acceptance of new technologies. Regulatory embedding can capture 17 the variety of policies that shape production, markets and use of new technologies. 18 ● Transnational community can reflect a shared understanding in a community of global experts 19 related to new technologies that transcends the borders of a single place, often a country. 20 While low-carbon innovation involves systemic change (Geels et al. 2018), these are typically less 21 popular than energy supply innovations among policymakers and the wider public. Managing low 22 carbon transitions is therefore not only a techno-managerial challenge (based on targets, policies, and 23 expert knowledge), but also a broader political project that involves the building of support coalitions 24 that include businesses and civil society (moderate evidence, high agreement). 25 Low-carbon transitions involve cultural changes extending beyond purely technical developments to 26 include changes in consumer practices, business models, and organizational arrangements. The 27 development and adoption of low-carbon innovations will therefore require sustained and effective 28 policies to create appropriate incentives and support. The implementation of such policies entails Do Not Cite, Quote or Distribute 6-113 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 political struggles because actors have different understandings and interests, giving rise to 2 disagreements and conflicts. 3 Such innovation also involves pervasive uncertainty around technical potential, cost, consumer demand, 4 and social acceptance. Such uncertainty carries governance challenges. Policy approaches facing deep 5 uncertainty must protect against and/or prepare for unforeseeable developments, whether it is through 6 resistance (planning for the worst possible case or future situation), resilience (making sure you can 7 recover quickly), or adaptation (changes to policy under changing conditions). Such uncertainty can be 8 hedged in part by learning by firms, consumers, and policymakers. Social interactions and network 9 building (e.g., supply and distribution chains, intermediary actors) and the articulation of positive 10 visions, such as in long-term, low-emission development strategies, all play a crucial role. This 11 uncertainty extends to the impacts of low carbon innovations on energy demand and other variables, 12 where unanticipated and unintended outcomes are the norm. For instance, rapid investments in public 13 transport networks could restrict car ownership from becoming common in developing countries (Du 14 and Lin 2017). 15 6.7.3.2 Physical Energy System Lock-In 16 Current investments in fossil infrastructure have committed 500-700 Gt-CO2 of emissions, creating 17 significant risks for limiting warming to 1.5℃ (Callaghan 2020) (high confidence). These current 18 investments combined with emissions from proposed fossil infrastructure exceed the emissions required 19 to limit warming to 1.5℃ (medium confidence). Existing coal and gas fired electricity generation 20 accounts for 200-300 Gt-CO2 of committed emissions. Emissions from coal generation are larger than 21 for gas plants (Tong et al. 2019; Smith et al. 2019). The lifetime of coal-fired power plants is 25-50 22 years, creating long lasting risks to climate goals (Erickson and Tempest 2015). Gas-fired power plants 23 are generally younger than coal-fired power plants. Industry sector lock-in amounts for more than 100 24 Gt-CO2, while buildings and transport sector together contribute another 50-100 Gt-CO2 (Erickson and 25 Tempest 2015). 26 Lock-in is also relevant to fossil resources. Both coal and gas exploration continue, and new permits 27 are being issued, which may cause economic (Erickson et al. 2018) as well as non-economic issues 28 (Boettcher et al. 2019). 29 The nature of lock in varies across the energy system. For example, lock-in in urban and transport 30 sectors is different from the electricity sector. Broadly, urban environments involve infrastructural, 31 institutional, and behavioural lock-in (Ürge-Vorsatz et al. 2018). Addressing lock-in in these sectors 32 requires action by multiple stakeholders and is unlikely with just technological evolution (Table 6.11). 33 Committed carbon emissions are unevenly distributed. The disproportionate high share of committed 34 emissions in emerging economies is the result of rapid growth in recent years, which has led to a 35 comparably young fossil infrastructure with substantial remaining life (Shearer et al. 2017). Mature 36 industrialized countries tend to have older infrastructures, part of which will be up for retirement in the 37 near future (Tong et al. 2019). Coal-fired power plants currently planned or under construction are 38 associated with 150-300 Gt-CO2, of which ~75% and ~10% are located in Asia and the OECD 39 respectively (Pfeiffer et al. 2018; Edenhofer et al. 2018). If implemented, these new fleets will further 40 shorten all coal plants’ lifetimes by another 10 years for meeting climate goals (Cui et al. 2019) 41 Do Not Cite, Quote or Distribute 6-114 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 2 Figure 6.34 Annual emissions from existing, proposed, and future energy system infrastructure (Tong 3 et al. 2019). 4 Despite the imperative to reduce use of fossil fuels and the multiple health and other benefits from 5 closing coal-based infrastructure (Liu et al. 2019a; Portugal-Pereira et al. 2018; Rauner et al. 2020; 6 Karlsson et al. 2020; Cui et al. 2021), coal power plants have continued to be commissioned globally 7 (Jewell et al. 2019; Jakob et al. 2020), most notably in Asian countries. Gas power plants also continue 8 to be built. In many regions, new fossil electricity generation exceeds needed capacity (Shearer et al. 9 2017). 10 Existing policies and the NDCs are insufficient to prevent an increase in fossil infrastructure and 11 associated carbon lock in (high confidence) (Bertram et al. 2015; Johnson et al. 2015). Current 12 investment decisions are critical because there is limited room within the carbon budget required to 13 limit warming to well below 2°C (Rosenbloom 2019; Kalkuhl et al. 2019). Delays in mitigation will 14 increase carbon lock-in and could result in large-scale stranded assets if stringency is subsequently 15 increased to limit warming (Box 6.11). Near-term implementation of stringent GHG mitigation policies 16 are likely to be most effective in reducing carbon lock-in (Haelg et al. 2018). Near-term mitigation 17 policies will also need to consider different energy transition strategies as a result of different resources 18 and carbon budgets between countries (Bos and Gupta 2018; Lucas 2016). 19 Near-term policy choices are particularly consequential for fast-growing economies. For example, 20 Malik et al. (2020) found that 133 to 227 GW of coal capacity would be stranded after 2030 if India 21 were to delay ambitious mitigation through 2030 and then pursue an ambitious, post-2030 climate 22 strategy. (Cui et al. 2021)identified 18% of old, small, inefficient coal plants for rapid near-term 23 retirement in China to help achieve air quality, health, water, and other societal goals and a feasible coal 24 phaseout under climate goals. Comparable magnitudes of stranded assets may also be created in Latin 25 America when adding all announced, authorized, and procured power plants up to 2060 (González- 26 Mahecha et al. 2019). Options to reduce carbon lock in include reducing fossil fuels subsidies (Box 27 6.3), building CCS-ready facilities, or ensuring that facilities are appropriately designed for fuel 28 switching (Budinis et al. 2018). Substantial lock-in may necessitate considerable deployment of CDR 29 to compensate for high cumulative emissions. 30 Past and present energy sector investments have created technological, institutional, and behavioural 31 path dependencies aligned towards coal, oil, and natural gas (high confidence). In several emerging 32 economies, large projects are planned that address poverty reduction and economic development. Coal 33 infrastructure may be the default choice for these investments without policies to invest in low-carbon 34 infrastructure instead (Steckel et al. 2020; Joshua and Alola 2020). Path dependencies frequently have Do Not Cite, Quote or Distribute 6-115 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 sustainability implications beyond carbon emissions. (Box 6.2 and Section 6.7.7). There are several 2 SDG co-benefits associated with decarbonization of energy systems (Section 6.7.7; Sörgel et al. 2021). 3 For example, coal mining communities frequently experience significant health and economic burdens 4 from resource extraction. 5 [START BOX 6.13 HERE] 6 Box 6.13 Stranded Assets 7 Limiting likely warming to 2°C or below will result in stranded assets (high confidence). Stranded assets 8 can be broadly defined as assets which “suffer from unanticipated or premature write-offs, downward 9 revaluations or [conversion] to liabilities.” Stranded assets may create risks for financial market stability 10 and macro-economic stability (Mercure et al. 2018, Battiston et al. 2017; Sen and von Schickfus 2020), 11 and they will result in a rapid loss of wealth for the owners of affected assets (Vogt-Schilb and 12 Hallegatte 2017; Ploeg and Rezai 2020). 13 There are two types of stranded assets: fossil-fuel resources that cannot be burned, and premature 14 retirement of fossil infrastructure (e.g., power plants). About 30% of oil, 50% of gas, and 80% of coal 15 reserves will remain unburnable if likely warming is limited to 2°C (Meinshausen et al. 2009; Leaton 16 2011; Leaton Ranger 2013; Pye et al. 2020; IRENA 2017b; Bauer et al. 2016; McGlade and Ekins 2015) 17 (high confidence). Significantly more reserves are expected to remain unburned if warming is limited 18 to 1.5°C. Countries with large oil, gas, and coal reserves are most at risk (Caldecott et al. 2017; Ansari 19 and Holz 2020) 20 About 200 GW of fossil fuel electricity generation per year will likely need to be retired prematurely 21 after 2030 to limit likely warming to 2°C, even if countries achieve their NDCs (Iyer et al. 2015; 22 Johnson et al. 2015; Fofrich et al. 2020) (medium confidence). Limiting warming to 1.5°C will require 23 significantly more rapid premature retirement of electricity generation capacity (Binsted et al. 2020). 24 Coal- and gas-fired power plants will likely need to retire about 25 years earlier than in the past to limit 25 likely warming to 2°C, and 30 years earlier to limit warming to 1.5°C (Cui et al. 2019; Fofrich et al. 26 2020). Coal-fired power plants are at significantly greater risk of stranding compared with gas-fired and 27 oil-fired plants (Iyer et al. 2015; Johnson et al. 2015; Fofrich et al. 2020). The risks of stranded power 28 plants are greatest in countries with newer fossil infrastructure. 29 If likely warming is limited to 2°C, the discounted economic impacts of stranded assets, including 30 unburned fossil reserves, could be as high as USD 1-4 trillion from 2015 through 2050 (USD 10-20 31 trillion in undiscounted terms) (Mercure et al. 2018), IRENA, 2017) (medium confidence). About 40% 32 of these impacts correspond to unburned fossil reserves (IRENA 2017b). If warming is limited to 1.5°C, 33 the economic impacts of stranded assets are expected to be significantly higher (Binsted et al. 2020) 34 Stronger near-term mitigation will reduce premature retirements of fossil infrastructure, because more 35 rapid mitigation will decrease new builds of fossil infrastructure that might later be stranded (Johnson 36 et al. 2015; Bertram et al. 2018) (high confidence). For example, if likely warming is limited to 2°C, 37 strengthening the NDC pledges beyond their 2015 levels could decrease stranded electricity sector 38 assets by more than 50% (Iyer et al. 2015). By contrast, if countries fail to meet their NDCs and continue 39 to build fossil infrastructure, mitigation will need to be accelerated beyond 2030, resulting up to double 40 the amount of stranded electricity generation capacity (Iyer et al. 2015). This corresponds to a total 41 undiscounted cost of about USD 2 trillion from electricity infrastructure alone, from the period 2015 42 to 2050 (IRENA 2017). CCS (6.4) could potentially help reduce hundreds of gigawatts stranded power 43 plant capacity along with other fossil-based capital (Clark and Herzog 2014; Fan et al. 2018; Iyer et al. 44 2017). 45 [END BOX 6.13 HERE] Do Not Cite, Quote or Distribute 6-116 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 6.7.4 Fossil fuels in a low-carbon transition 2 Global fossil fuel use will need to decline substantially by 2050 to limit likely warming to 2°C or below, 3 and it must decline substantially by 2030 to limit warming to 1.5°C with no or limited overshoot (high 4 confidence). Failing to reduce global fossil fuel use below today’s levels by 2030 will make it more 5 challenging to limit likely warming to below 2°C. (high confidence). Fossil fuel use declines by 260- 6 330 EJ (52-73% from 2020 levels, interquartile range) through 2050 to limit warming to 1.5°C with no 7 or limited overshoot and 124-231 EJ (23-51% reduction compared to 2020 levels) to limit likely 8 warming to 2°C; this will require a significant reduction in coal, oil and gas investments. Fossil fuels 9 account for about 80% of primary energy today. In scenarios limiting warming to 1.5°C with limited or 10 no overshoot, fossil energy provides 59-69% (interquartile range) primary energy in 2030 and 25-40s% 11 primary energy in 2050 (AR6 database). In scenarios limiting likely warming to 2°C or below, fossil 12 energy provides 71-75% (interquartile range) primary energy in 2030 and 41-57% primary energy in 13 2050 (AR6 database). The timeline for reducing production and usage varies across coal, oil, and gas 14 due to their differing carbon intensities and their differing uses. 15 Global coal consumption without CCS needs to be largely eliminated by 2040-2050 to limit warming 16 to 1.5°C, and 2050-2060 to limit likely warming to 2°C (high confidence). New investments in coal- 17 fired electricity without CCS are inconsistent with limiting likely warming to 2°C or below (high 18 confidence) (Spencer et al. 2018; Pfeiffer et al. 2018; Edenhofer et al. 2018; Cui et al. 2019). Coal 19 consumption declines 130 EJ yr-1 to 140 EJ yr-1 in 2050 (79% to 99% compared to 2020 levels, 20 interquartile range) in scenarios limiting warming to 1.5°C and 118 EJ yr-1 to 139 EJ yr-1 (66% to 98% 21 compared to 2020 levels) in scenarios limiting likely warming to 2°C. Coal consumption without CCS 22 falls by 67% to 82% (interquartile range) in 2030 in scenarios limiting warming to 1.5°C with no or 23 limited overshoot. Studies indicate that coal use may decline substantially in the US and Europe over 24 the coming decade based on the increasing competitiveness of low-carbon sources and near-term policy 25 actions (Oei et al. 2020; Grubert and Brandt 2019). In several developing economies, the relative youth 26 of the coal-fired electricity fleet will make a complete phaseout before 2050 difficult (Garg and Shukla 27 2009; Jewell et al. 2016). There are considerable differences in projected coal phaseout timelines in 28 major Asian economies. Some studies suggest that coal may continue to be a part of the Chinese energy 29 mix composing around a third of the total primary energy consumption by 2050 even if emissions are 30 reduced by 50% by 2030 (He et al. 2020). Others indicate that a strategic transition would decrease the 31 risk of stranded assets and enable a near-complete phaseout by 2050 (Wang et al. 2020a; Cui et al. 32 2021). This would entail prioritizing earlier retirements of plants based on technical (efficiency), 33 economic (profitability, local employment) and environmental considerations (e.g., water scarcity for 34 cooling). 35 Natural gas may remain part of energy systems through mid-century, both for electricity generation and 36 use in industry and buildings, and particularly in developed economies, even if likely warming is limited 37 to 2°C or less (medium confidence). The decline in natural gas use in from 2020 to 2050 is 38 EJ yr-1 to 38 78 EJ yr-1 (21% to 61% decline from 2020 levels, interquartile range) in scenarios limiting warming to 39 1.5C with no or limited overshoot and -22 EJ yr-1 to 46 EJ yr-1 (-13% to 36% decline from 2020 levels) 40 in scenarios limiting likely warming to 2°C. Scenarios indicate that gas use in electricity will likely 41 peak around 2035 and 2050 if warming is limited to 1.5°C with limited or no overshoot or likely below 42 2°C, respectively. There is variability in the role gas would play in future scenarios based on national 43 climate commitments and availability of cheap renewable (Vrontisi et al. 2020, (Vishwanathan and 44 Garg 2020; Malik et al. 2020). Note that these differences are not only present in the electricity sector 45 but also in other end-uses. 46 While oil use is anticipated to decline substantially, due to changes in the transport sector, its use will 47 likely continue through the mid-century, even if likely warming is limited to 2°C or less (medium 48 confidence). Oil use declines by 43 EJ yr-1 to 91 EJ yr-1 (19% to 54% from 2020 levels, interquartile Do Not Cite, Quote or Distribute 6-117 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 range) in scenarios that limit warming to 1.5°C with no or limited overshoot and 46 EJ yr-1 to 109 EJ 2 yr-1 (21% 60% from 2020 levels) by 2050 in scenarios that limit likely warming to 2°C. While oil use 3 is anticipated to decline immediately in scenarios limiting warming to 1.5°C, it is likely to continue to 4 be used through 2050. Oil use continues to be a significant source of transport fuels in most scenarios 5 limiting likely warming to 2°C (Welsby et al, 2021). Oil use may reduce to about half of the current 6 levels as a transport fuels (Feijoo et al. 2020) if likely warming is limited to 2°C, because of the 7 availability of other options (biofuels, green hydrogen) and rapid deployment of EVs. In the absence of 8 rapid transport electrification, the decline is slower with some studies projecting peak oil use around 9 2035 (Delgado et al. 2020; Pan et al. 2020). 10 There is a lack of consensus about how CCS might alter fossil fuel transitions for limiting likely 11 warming to 2°C or below. CCS deployment will increase the shares of fossil fuels associated with 12 limiting warming, and it can ease the economic transition to a low-carbon energy system (Muratori et 13 al. 2016; Marcucci et al. 2019).While some studies find a significant role for fossil fuels with CCS by 14 2050 (Koelbl et al. 2014; Eom et al. 2015; Vishwanathan and Garg 2020), others find that retirement of 15 unabated coal far outpaces the deployment of coal with CCS (McJeon et al, 2021; Budinis et al. 2018; 16 Xie et al. 2020) Moreover, several models also project that with availability of CO2 capture technology, 17 BECCS might become significantly more appealing than fossil CCS even before 2050 (Luderer et al. 18 2018b; Muratori et al, 2017). Coal without CCS Gas without CCS Oil Total fossil 120 140 140 120 Primary energy relative to 2020 (%) Primary energy relative to 2020 (%) Primary energy relative to 2020 (%) 100 120 120 100 100 80 100 80 80 60 60 60 Primary energy relative to 2020 (%) 40 80 40 40 20 20 20 0 0 CH4 0 60 2030 2040 2050 2030 2040 2050 2030 2040 2050 8000 Total fossil without CCS Coal with CCS Gas with CCS 7000 120 90 140 Emissions (Mt-CO2/year) 6000 80 Primary energy relative to 2020 (%) 100 120 40 70 Primary energy (EJ) Primary energy (EJ) 5000 100 80 60 4000 50 80 60 40 60 3000 20 40 30 40 2000 20 20 20 1000 10 0 0 0 0 2030 2040 02050 2020 2030 2040 2050 2020 2030 2040 2050 2030 2040 2050 2020 2030 2040 2050 1.5°C without overshoot 1.5°C with overshoot Likely below 2°C Likely below 2°C with delay 19 20 Figure 6.35 Global fossil fuel pathways for the 1.5°C scenarios (without and with overshoot), and likely 21 2°C scenarios (without and with delayed policy action) during 2020-2050 (Source: AR6 Scenario 22 Database). Results for total consumption are expressed as a percentage relative to 2020 consumption. 23 Results for fossil energy with CCS are expressed in total energy consumption. Boxes indicate 25th and 24 75th percentiles while whiskers indicate 5th and 95th percentiles. Oil use with CCS is not shown here as it 25 remains below 5% of total use. 26 6.7.5 Policy and Governance 27 Policy and governance frameworks are essential for shaping near- and medium-term low-emissions 28 energy system transitions (high confidence). While policy interventions are necessary to achieve low- 29 carbon energy system transitions, appropriate governance frameworks are crucial to ensure policy 30 implementation (high confidence). The policy environment in energy transition pathways relate to Do Not Cite, Quote or Distribute 6-118 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 climate policy goals, the characteristics of the policy regimes and measures to reach the policy goals 2 including implementation limits and obstacles, and the timing of the climate instrument (Kriegler et al. 3 2014b) 4 The literature discusses a broad set of policy approaches. Environmental economics focuses mainly on 5 market-based approaches as the least-cost policy to achieve emission reductions (Kube et al. 2018). 6 Many countries, however, have implemented policy mixes with a diverse set of complementary policies 7 to achieve energy and climate policy targets. One example is the German Energiewende, which includes 8 substantial support for renewables, an action plan for energy efficiency, and phase-out processes for 9 nuclear- and coal-based power generation next to carbon pricing (Löschel et al. 2019). The halving of 10 CO2 emissions in UK power generation reflects multiple policies, particularly within the UK’s Climate 11 Change Act 2008 (Grubb and Newbery 2018). More generally, the implementation of the NDCs under 12 the Paris Agreement are all characterized by diverse climate policy mixes. 13 These policy mixes (or policy packages) are shaped by different factors, including policy goals and 14 objectives (including political, social and technological influences), multiple market, governance or 15 behavioural failures or previous policy choices of earlier policy eras (Rogge 2017). When pursuing 16 multiple policy goals or targeting some type of imperfection, well designed policy mixes can in 17 principle reduce mitigation costs (Corradini et al. 2018) or address distributional concerns, especially 18 vulnerable populations. For example, the interaction between carbon pricing and the support for clean 19 energy technologies in the EU clean low-carbon strategy for 2050 can reduce mitigation costs and allow 20 for the early adoption of more stringent climate targets (Vandyck et al. 2016). Policy efforts to promote 21 adoption of low-carbon technologies are more successful if they focus not only on economic incentives 22 but include behavioural interventions that target relevant cognitive and motivational factors (Khanna et 23 al. 2021; Mundaca et al. 2019; see also Section 6.7.6). Overlapping nudges might not necessarily lead 24 to lower effectiveness (Brandon et al. 2019). 25 Well-designed policy mixes can support the pursuit of multiple policy goals, target effectively different 26 types of imperfections and framework conditions and take into account the technological, economical, 27 and societal situation (high confidence). Accounting for the different development stages of new 28 technologies will enhance low-emissions transitions (Graaf and Sovacool 2020). For prototype 29 technologies and technologies in the demonstration phase, research subsidies and demonstration 30 projects are most important. For technologies experiencing early adoption, infrastructure development 31 and strengthening of markets are increasingly important, while retiring or repurposing of existing assets 32 is important for mature technologies (IEA 2020h) Effective policy mixes will address different market 33 frictions and deal with various uncertainties, for example, those pertaining to technological, climate, 34 and socio-economic developments (Aldy 2020), but also with respect to outcomes of individual policies 35 (e.g. Borenstein et al. 2019). Therefore, policy mixes may balance the trade-off between stability and 36 the flexibility to change individual policies (Gawel and Lehmann 2019) and the policy mix over time 37 (Rayner et al. 2017). Some policy instruments may become feasible over time, for example, as 38 technological advancements reduce the transaction costs of comprehensive market-based approaches 39 (Andoni et al. 2019; Di Silvestre et al. 2020), or as weakened barriers to stringency enable policy 40 sequencing (Pahle et al. 2018) . Energy system policy mixes often include sector-specific regulation. 41 Compared to economy-wide approaches, sectoral policies may be able to directly target specific sectors 42 or mitigation options. However, uncoordinated implementation or limited coordination across sectors 43 may lead to efficiency losses (e.g. Rosendahl et al. 2017). These losses also depend on other policies, 44 such as pre-existing taxes (Goulder et al. 2016; Marten et al. 2018) or research and development policies 45 (Acemoglu et al. 2016). Moreover, unilateral policies – those taken by individual countries in the 46 absence of coordination with other countries – could raise carbon leakage risks, while balancing 47 potential issues of (industrial) competitiveness (Martin et al. 2014; Rosendahl et al. 2017). Energy 48 leakage may become more important during low-carbon energy systems. Numerous studies have Do Not Cite, Quote or Distribute 6-119 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 identified pathways for carbon leakage in electricity markets with incomplete emission markets (Caron 2 et al. 2015; Thurber et al. 2015; Murray and Maniloff 2015; Fell and Maniloff 2017; Duan et al. 2017; 3 Qian et al. 2018). Well-designed policy mixes will need to target the whole life-cycle or value chains, 4 for example, through policies on limiting fossil fuel extraction (Asheim et al. 2019), or they will need 5 to include measures to limit carbon leakage (e.g. Cosbey et al. 2019). 6 Interactions between policy measures including their scope, stringency, and timing, influence the costs 7 of reducing emissions (Corradini et al. 2018). In particular, some policy instruments may lead to lock- 8 in effects (Section 6.7.3.), compete with other regulations (Graaf and Sovacool 2020), or trigger 9 negative policy interactions (Perino 2015; Jarke-Neuert and Perino 2020). Existing policy mixes often 10 reflect different political economy constraints and sometimes not well coordinated goals. The resulting 11 policy mixes are often economically inefficient. However, comprehensive evaluation of policy mixes 12 requires a broader set of criteria that reflect different considerations, such as broader goals (e.g., SDGs) 13 and the feasibility of policies (high confidence). 14 Policy mixes might rather emerge piece-by-piece over time out of individual policy interventions rather 15 than be designed as a whole from the outset (Howlett 2014; Rogge 2017) and may reflect differences 16 across jurisdictions and sectors (Howlett 2014). For example, taking into account country-specific 17 objectives, failures, and limitations, carbon prices may be only one part of a broader policy mix and 18 thereby may not be uniform across countries (Bataille 2020). This lack of consistency makes it more 19 difficult to assess economic outcomes since costs of complementary policies are often less visible and 20 are often targeted at high-cost mitigation options (Borenstein et al. 2019). 21 Effective assessment of policy mixes requires comprehensive, validated international data, 22 methodologies, and indicators. Existing policy mixes are difficult to evaluate because they target 23 multiple objectives, and the evaluation must consider various criteria (Chapter 13, 6.7.7), such as 24 environmental and economic effectiveness, distributional effects, transformative potential, institutional 25 requirements, and feasibility. Economic outcomes depend on policy goals and implementation. Existing 26 studies on policy mixes suggest the benefits of a comprehensive approach (Rosenow et al. 2017), while 27 also highlighting that an “excessive” number of instruments may reduce overall effectiveness 28 (Costantini et al. 2017). Combining environmental regulation and innovation policies may be of 29 particular importance to tackle both emissions and innovation market failures (Fabrizi et al. 2018). The 30 consistency and credibility of policy mixes is positively associated with green innovation (Rogge and 31 Schleich 2018). 32 Potential future policies are difficult to evaluate due to methodological challenges (high confidence). 33 Recent model-based analyses of future policy mixes based on “current policy scenarios” try to 34 implement existing policies besides explicit or implicit carbon prices (den Elzen et al. 2016; Roelfsema 35 et al. 2020; van Soest et al. 2017; Rogelj et al. 2016). Many assessments of future low-carbon energy 36 transitions are still based on cost-optimal evaluation frameworks and include only limited analysis of 37 interactions between policy measures. Hence they are often not describing real-world energy transitions 38 properly, but rather differences in implied carbon prices, constraints in technology deployment, and 39 timing of policies (Trutnevyte 2016). 40 41 6.7.6 Behaviour and Societal Integration 42 Members of societies, including individuals, civil society, and businesses, will all need to engage with 43 and be affected by low-carbon energy system transitions (high confidence). This raises questions about 44 the extent to which different strategies and policy would effectively promote mitigation behaviours and 45 the factors that increase the social acceptability of mitigation options, policies, and system changes. Do Not Cite, Quote or Distribute 6-120 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 6.7.6.1 Strategies to encourage climate mitigation actions 2 Climate policy will be particularly effective if it targets key factor inhibiting, enabling, and motivating 3 mitigation behaviours. As barriers differ across mitigation options, regions, and groups, tailored 4 approaches are more effective (Grubb et al. 2017). When people face important barriers to change (e.g., 5 high costs, legal barriers), policy would be needed make low carbon actions more attractive, or to make 6 high carbon actions less attractive. As people generally face multiple barriers for change, combinations 7 of policies would be more effective (Rosenow et al. 2017). 8 Financial incentives can motivate mitigation actions (Santos 2008; Thøgersen 2009; Eliasson 2014; 9 Maki et al. 2016; Bolderdijk et al. 2011), particularly when actions are costly (Mundaca 2007). In many 10 countries, more residential solar PV were installed after the introduction of favourable financial 11 schemes such as feed-in-tariffs, federal income tax credits, and net metering (Wolske and Stern 2018). 12 Similarly, a subsidy promoted the installation of solar water heaters in Asia (Chang et al. 2009). Yet, 13 financial incentives may underperform expectations when other factors are overlooked. For example, 14 people may not respond to financial incentives when they do not trust the organization sponsoring the 15 program or when it takes too much effort to receive the incentive (Mundaca 2007; Stern et al. 2016a). 16 Financial incentives are more effective if combined with strategies addressing non-financial barriers. 17 Communicating financial consequences of behaviour seems less effective than emphasizing social 18 rewards (Handgraaf et al. 2013) or benefits of actions for people (e.g., public health, comfort) and the 19 environment (Asensio and Delmas 2015, 2016; Schwartz et al. 2015; Ossokina 2020; Bolderdijk et al. 20 2013). Financial appeals may have limited effects because they reduce people’s focus on environmental 21 consequences, weaken intrinsic motivation to engage in mitigation actions, provide a license to pollute 22 (Agrawal et al. 2015; Bolderdijk and Steg 2015; Schwartz et al. 2015), and because pursuing small 23 financial gains is perceived not worth the effort (Dogan et al. 2014; Bolderdijk et al. 2013). 24 Providing information on the causes and consequences of climate change or on effective mitigation 25 actions increases people’s knowledge and awareness, but generally does not promote mitigation actions 26 by individuals (Abrahamse et al. 2005) or organizations (Anderson and Newell 2004). Fear-inducing 27 representations of climate change may inhibit action when they make people feel helpless (O´Neill and 28 Nicholson-Cole 2009). Energy-related advice and feedback can promote energy savings, load shifting 29 in electricity use and sustainable travel, particularly when framed in terms of losses rather than gains 30 (Gonzales et al. 1988; Wolak 2011; Bradley et al. 2016; Bager and Mundaca 2017). Also, credible and 31 targeted information at the point of decision can promote action (Stern et al. 2016a). Information is 32 more effective when delivered by a trusted source, such as peers (Palm 2017), advocacy groups (Schelly 33 2014), and community organizations (Noll et al. 2014), and when tailored to actors’ personal situation 34 and core values (Abrahamse et al. 2007; Boomsma and Steg 2014; van den Broek et al. 2017; Daamen 35 et al. 2001; Wolsko et al. 2016; Bolderdijk et al. 2013). This explains why home energy audits promoted 36 energy savings (Delmas et al. 2013; Alberini and Towe 2015), and investments in resource efficiency 37 and renewable energy generation (Kastner and Stern 2015). 38 Energy use feedback can promote energy saving behaviour within households (Grønhøj and Thøgersen 39 2011; Fischer 2008; Karlin et al. 2015; Delmas et al. 2013; Zangheri et al. 2019) and at work (Young 40 et al. 2015), particularly when provided in real-time or immediately after the action so that people learn 41 the impact of different actions (Faruqui et al. 2009; Delmas et al. 2013; Abrahamse et al. 2005; 42 Tiefenbeck et al. 2016; Stern et al. 2016a; Yu et al. 2015). Energy labels (Banerjee and Solomon 2003; 43 Stadelmann 2017), visualization techniques (Pahl et al. 2016), and ambient persuasive technology 44 (Midden and Ham 2012) can encourage energy savings as they immediately make sense and hardly 45 require users’ conscious attention. Feedback can make people aware of their previous mitigation 46 behaviours, which can strengthen their environmental self-identity, and motivate them to engage in 47 other mitigation actions as well as to act in line with their self-image (Van der Werff et al. 2014). Do Not Cite, Quote or Distribute 6-121 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 Social influence approaches that communicate what other people do or think can encourage mitigation 2 actions (Clayton et al. 2015), as can social models of desired actions (Osbaldiston and Schott 2012; 3 Abrahamse and Steg 2013; Wolske et al. 2020; Sussman and Gifford 2013). Feedback on one’s own 4 energy use relative to others can be effective (Nolan et al. 2008; Allcott 2011; Schultz et al. 2015), 5 although not always, and effect sizes are small (Abrahamse and Steg 2013) compared to other types of 6 feedback (Karlin et al. 2015). 7 Interventions that capitalize on people’s motivation to be consistent can promote mitigation actions 8 (Steg 2016). Examples are commitment strategies where people pledge to act (Abrahamse and Steg 9 2013; Lokhorst et al. 2013), implementation intentions where they additionally explicate how and when 10 they will perform the relevant action and how they would cope with possible barriers (Rees et al. 2018; 11 Bamberg 2000, 2002), and hypocrisy-related strategies that make people aware of inconsistencies 12 between their attitudes and behaviour (Osbaldiston and Schott 2012). 13 Bottom-up approaches can promote mitigation action (Abrahamse and Steg 2013). Indeed, community 14 energy initiatives can encourage members’ low carbon behaviour (Middlemiss 2011; Seyfang and 15 Haxeltine 2012; Abrahamse and Steg 2013; Sloot et al. 2018). Organizations can promote mitigation 16 behaviour among their employees and customers by communicating their mission and strategies to 17 mitigate climate change (van der Werff et al. 2021; Ruepert et al. 2017). 18 Default options, where a preset choice is implemented if users do not select another option, can promote 19 mitigation actions such as energy savings, green electricity uptake, and meat-free meals options (Liebe 20 et al. 2021; Pichert and Katsikopoulos 2008; Ölander and Thøgersen 2014; Kunreuther and Weber 21 2014; Bessette et al. 2014; Ebeling and Lotz 2015; Liebe et al. 2018; Campbell-Arvai et al. 2014). 22 6.7.6.2 Acceptability of policy, mitigation options and system changes 23 Public acceptability reflects the extent to which the public evaluates climate policy, mitigation options, 24 and system changes (un)favourably, which can shape, enable, or prevent low-carbon energy system 25 transitions. Public acceptability of policy and mitigation options is higher when people expect these 26 have more positive and less negative consequences for self, others, and the environment (Demski et al. 27 2015; Drews and Van den Bergh 2016; Perlaviciute and Steg 2014). Public opposition may result when 28 a culturally valued landscape is affected by renewable energy development (Warren et al. 2005; Devine- 29 Wright and Howes 2010), particularly place-based identities are threatened (Devine-Wright 2009, 2013; 30 Boudet 2019). Acceptability can increase after a policy or change has been implemented and the 31 consequences appear to be more positive than expected (Carattini et al. 2018; Schuitema et al. 2010; 32 Eliasson 2014; Weber 2015); effective policy trials can thus build public support. 33 Next, climate policy and low carbon options are evaluated as more fair and acceptable when costs and 34 benefits are distributed equally, and when nature, the environment and future generations are protected 35 (Schuitema et al. 2011; Drews and Van den Bergh 2016). Compensating affected groups for losses due 36 to policy or systems changes enhanced public acceptability in some cases (Perlaviciute and Steg 2014), 37 but people may disagree on which compensation would be worthwhile (Aitken 2010b; Cass et al. 2010), 38 on the distribution of compensation (Devine-Wright and Sherry-Brennan 2019; Leer Jørgensen et al. 39 2020), or feel they are being bribed (Perlaviciute and Steg 2014; Cass et al. 2010). Pricing policies are 40 more acceptable when revenues are earmarked for environmental purposes (Steg et al. 2006; Sælen and 41 Kallbekken 2011) or redistributed towards those affected (Schuitema and Steg 2008). 42 Climate policy and mitigation options, such as renewable energy projects, are also perceived as more 43 fair and acceptable when the public (Dietz 2013; Bidwell 2014; Bernauer et al. 2016b) or public society 44 organizations (Terwel et al. 2010; Bernauer et al. 2016b) could participate in the decision making 45 (Devine-Wright 2005; Terwel et al. 2012; Perlaviciute and Squintani 2020; Arvai 2003; Walker and 46 Baxter 2017). People are more motivated to participate in decision making on local projects than on 47 national or general policy goals (Perlaviciute and Squintani 2020). Public acceptability is also higher Do Not Cite, Quote or Distribute 6-122 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 when people can influence major rather than only minor decisions, particularly when trust in responsible 2 parties is low (Liu et al. 2019a). Public participation can enhance the quality and legitimacy of decisions 3 by including local knowledge and views that may otherwise be missed (Bidwell 2016; Dietz 2013). 4 Public support is higher when people trust responsible parties (Perlaviciute and Steg 2014; Jiang et al. 5 2018; Drews and Van den Bergh 2016; Michaels and Parag 2016; Liu et al. 2019a). Public support for 6 unilateral climate policy is rather strong and robust (Bernauer et al. 2016a), even in the absence of 7 reciprocal commitments by other states (Bernauer and Gampfer 2015). 8 Public acceptability of climate policy and low carbon options differs across individuals. Climate policy 9 and low carbon options are more acceptable when people strongly value protecting other people and 10 the environment, and support egalitarian worldviews, left-wing or green political ideologies, while 11 acceptability is lower when people strongly endorse self-centered values, and support individualistic 12 worldviews (Dietz et al. 2007; Perlaviciute and Steg 2014; Drews and Van den Bergh 2016). Similarly, 13 public decision makers support climate policy more when they endorse environmental values (Nilsson 14 et al. 2016). Climate and energy policy is more acceptable when people are more concerned about 15 climate change (Hornsey et al. 2016), when they believe their actions would help mitigating climate 16 change, and feel responsible to mitigate climate change (Steg 2005; Jakovcevic and Steg 2013; Ünal et 17 al. 2019; Eriksson et al. 2006; Drews and Van den Bergh 2016; Kim and Shin 2017). 18 19 6.7.7 The Costs and Benefits of Low-Carbon Energy System Transitions in the Context 20 of Sustainable Development 21 The attractiveness of energy sector mitigation ultimately depends on the way that it provides benefits 22 and reduces the costs for the many different priorities that societies value(Wei et al. 2018, 2020; Yang 23 et al. 2018a). While costs and benefits of climate mitigation are often considered in the context of pure 24 economic outcomes – for example, GDP effects or changes in value of consumption – costs and benefits 25 should be viewed with a broader lens that accounts for the many ways that the energy system interacts 26 with societal priorities (Karlsson et al. 2020). Climate mitigation is not separate from countries’ broader 27 growth and development strategies, but rather as a key element of those strategies. 28 Cost reductions in key technologies, particularly in electricity and light-duty transport, have increased 29 the economic attractiveness of near-term low-carbon energy system transitions (high confidence). The 30 near-term, economic outcomes of low-carbon energy system transitions in some sectors and regions 31 may be on par with or superior to those of an emissions-intensive future (high confidence). Even in 32 cases when system costs are higher for low-carbon transitions, these transitions may still be 33 economically favourable when accounting for health impacts and other co-benefits (Gielen et al. 2019). 34 Past assessments have quantified the aggregate economic costs for climate change mitigation using 35 different metrics, for example carbon prices, GDP losses, investments in energy infrastructure, and 36 energy system costs. Assessments of mitigation costs from integrated assessment and energy system 37 models vary widely. For example, scenarios include carbon prices in 2030 of less than USD 20/t-CO2, 38 but also more than USD 400/t-CO2 depending on the region, sector boundary, and methodology (e.g. 39 (Bauer et al. 2016; Oshiro et al. 2017; Vaillancourt et al. 2017; Chen et al. 2019; Brouwer et al. 2016). 40 Those arise both from different methodologies (Guivarch and Rogelj 2017) and assumptions about 41 uncertainties in key factors that drive costs (Meyer et al. 2021) 42 Recent developments, however, raise the prospect that economic outcomes could be substantially 43 superior to prior estimates, particularly if key technologies continue to improve rapidly. In some regions 44 and circumstances, particularly in the electricity sector, near-term mitigation may well lead to superior 45 economic outcomes than continuing to invest in and utilize emissions-intensive infrastructure (e.g. 46 (Brown et al. 2017; Kumar et al. 2020). Given the importance of electricity decarbonization in near- 47 term mitigation strategies (see Section 6.7.1), decreasing costs of solar PV, wind power, and batteries Do Not Cite, Quote or Distribute 6-123 Total pages: 217 Final Government Distribution Chapter 6 IPCC WGIII AR6 1 to support their integration, have an outsized influence on near-term economic outcomes from 2 mitigation. At the same time, economic outcomes may vary across regions depending, among other 3 things, on the characteristics of the current energy systems, energy resources, and needs for integrating 4 VRE technologies. 5 The long-term economic characteristics of low-emissions energy system transitions are not well 6 understood and depend on policy design and implementation along with future costs and availability of 7 technologies in key sectors (e.g., process heat, long-distance transport), and the ease of electrification 8 in end-use sectors (high confidence). The long-term aggregate economic outcomes from a low- 9 emissions future are not likely to be substantially worse than in an emissions-intensive future and may 10 prove superior (see, e.g., Bogdanov et al. 2021, Child et al. 2019, Farmer et al. 2020) (medium 11 confidence). For the whole economy, the interquartile range of estimated mitigation costs is between 12 USD2015 140 and USD2015 340/t-CO2 in 2050 in scenarios limiting likely warming to 2°C and between 13 USD2015 430 and USD2015 990/tCO2 in scenarios limiting likely warming to 1.5°C (Chapter 3). For 14 energy sectors in various regions and globally, different scenarios show a wide range of implied carbon 15 prices in 2050 to limit warming to 1.5°C, from below USD 50/t-CO2 to more than USD 900/t-CO2 16 (Brouwer et al. 2016; Rogelj et al. 2018a). Mitigation costs for scenarios limiting likely warming to 2°C 17 were 3-11% in consumption losses in AR5, but the median in newer studies is about 3% in GDP losses 18 (Su et al. 2018; Gambhir et al. 2019). 19 Estimates of long run mitigation costs are highly uncertain and depend on various factors. Both faster 20 technological developments and international cooperation are consistently found to improve economic 21 outcomes (Paroussos et al. 2019). Long-term mitigation is likely to be more challenging than near-term 22 mitigation because low-cost opportunities get utilized first and efforts after that would require 23 mitigation in more challenging sectors (Section 6.6). Advances in low-carbon energy resources and 24 carriers such as next-generation biofuels, hydrogen produced from electrolysis, synthetic fuels, and 25 carbon-neutral ammonia would substantially improve the economics of net zero energy systems (high 26 confidence). Current estimates of cumulative mitigation costs are comparably high for developing 27 countries, amounting to up to 2-3% of GDP, indicating difficulties for mitigation without adequate 28 support from developed countries (Fujimori et al. 2020; Dorband et al. 2019). In scenarios involving 29 large amounts of stranded assets, the overall costs of low-carbon transitions also include the additional 30 costs of early retirements (Box 6.11). 31 Focusing only on aggregate economic outcomes neglects distributional impacts, impacts on broader 32 SDGs, and other outcomes of broad societal importance. Strategies to increase energy efficiency and 33 energy conservation are, in most instances, mutually reinforcing with strategies to support sustainable 34 development. Improving efficiency and energy conservation will promote sustainable consumption and 35 production of energy and associated materials (SDG-12) (high confidence). Contrastingly, successful 36 implementation of demand-side options requires sustainable partnerships (SDG-17) between different 37 actors in energy systems, for example governments, utilities, distributors, and consumers. Many authors 38 have argued that energy efficiency has a large untapped potential in both supply and demand (Lovins 39 2018; Méjean et al. 2019). For example, improved fossil power plant efficiency has been estimated to 40 lower the costs of CCS from USD 80-100/t-CO2 for a subcritical plant to